CARSON MM-500 Zorb 81x Digital Microscope User Manual
- June 6, 2024
- Carson
Table of Contents
- PRODUCT SPECIFICATION
- OPTICAL SPECIFICATION
- POWER RATINGS
- PACKAGE CONTENTS
- PRODUCT OVERVIEW
- ATTACHING ADAPTER TO MICROSCOPE
- DOWNLOAD AND CONNECT THE DEVICE
- FOCUSING
- USING THE XPLOVIEW SOFTWARE
- XPLOVIEW SETTINGS MENU
- CARE AND MAINTENANCE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Zorb™
81x Digital Microscope
MM-500
Congratulations on selecting your new Zorb™! In order to achieve optimum performance, please follow instructions for proper use and care.
PRODUCT SPECIFICATION
| Magnification: | 81x (on a 32” Screen) |
|---|---|
| Resolution: | 1600 x 1200 Pixels |
| Weight: | 0.19 lbs |
| Dimensions: | 1.8” x 1.8” x 2.4” |
| Accessory: | 2 Viewing Adapters |
OPTICAL SPECIFICATION
| Effective Magnification* | 53x @ 21” Screen |
|---|
61x @ 24” Screen
68x @ 27” Screen
81x @ 32” Screen
Image Sensor Format| 2.0M Pixel UXGACMOS
mage Resolution| 1600 x 1200 Pixels (UXGA)
*Please note, the effective magnification is a combination of the optical system and ahigh powered digital zoom based upon the aabove screen sizes.
POWER RATINGS
| 5V DC 250mA | USB 2.0 / 3.0 |
|---|
PACKAGE CONTENTS
PRODUCT OVERVIEW
ATTACHING ADAPTER TO MICROSCOPE
To view the images clearly, please use one of the adaptors provided. Place one of the adapters into the adapter slot located under the main body. Lock by turning adapter in a clockwise direction.
DOWNLOAD AND CONNECT THE DEVICE
- Go to www.carson.com/software to download and install the latest Xploview software for your operating system.
- Compatible with Mac and Windows
- USB 2.0 / 3.0 required. No batteries required.
- Connect device to a computer using the attached USB cable. The LED light will turn on indicating that the device is powered on.
- When device is connected to the computer for the first time, a driver will automatically be installed by Windows or Mac OS.
FOCUSING
Rotate the focusing ring clockwise or counterclockwise until the viewing image
shown on the monitor is clear and sharp.
To take a quick image, press the shutter button.*
USING THE XPLOVIEW SOFTWARE
| Click to open the Xploview settings menu (see next section).
---|---
| Click to capture an image.
| Click to start and stop the timed shot feature. When activated, images will
be captured at a regular interval.
| Click to start and stop the video recording feature.
| Click to show the copyright and version information of the application
software.
| Click to close the Xploview software.
| Click to view in full screen mode. Button is on bottom right hand corner of
screen. Press “Esc” to exit mode.
XPLOVIEW SETTINGS MENU
The first time the Xploview software is started, the default settings will be loaded. You may change these settings manually in the system settings menu. Be sure to click “Apply” to save setting changes.
- Device Setup: If the image captured by the Digital Microscope was not displayed by default, you can change this by selecting it from the “Device” drop-down menu. The resolution of images you capture can be changed from the “Resolution” drop-down menu.
- Timed Shot Setup: The frequency and duration of automatic images captured can be adjusted under this option.
- Movie Setup: The resolution of videos you record can be changed from the “Resolution” menu. You can also set a maximum file size for each video.
- Save Setting: The default location for captured images or videos can be changed under this option.
- Language Setting: The language of the Xploview software can be changed under this option.
- “More”: By clicking “More…” on the right side of Settings Menu, you will access the Digital Viewer Properties where you can manually adjust image settings. Depending on your operating system, settings may differ. (See image on the right.)
Settings Menu
Digital Viewer Properties Menu
VIEW PHOTOS AND VIDEOS
CARE AND MAINTENANCE
- Keep device dry and protect from water or vapor.
- Store device in original packaging to prevent damage.
- Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Wipe with a soft cloth, using a mild soap and water solution.
WARNING:
- To avoid eye damage, do not place the lighted microscope directly upon human eye.
- Do not touch the device with wet hands as it may damage the device, or cause an electric shock to the user.
- Never attempt to open or dismantle the Digital Microscope.
Customer Service:
If you experience any difficulties, please contact us and we will be happy to
help you.
info@carson.com|
uksupport@carson.com|
eusupport@carson.com
---|---|---
www.carson.com
Carson Optical 2070 5th Avenue, Ronkonkoma, NY 11779 | Tel:
631-963-5000
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>