VITRIFRIGO C25L DC/AC Fridges Instruction Manual
- June 6, 2024
- VITRIFRIGO
Table of Contents
C25L DC AC Fridges
Instruction Manual
THANK YOU FOR PURCHASING A VITRIFRIGO PRODUCT
Dear client, thank you for choosing one of our products. Vitrifrigo hopes that
you will be completely satisfied with your purchase. This manual is considered
an integral part of the refrigerator and must follow the sales path to the
user. The same can be consulted on the Vitrifrigo website
www.vitrifrigo.com. Each refrigerator, before
being shipped, is thoroughly checked and tested to ensure it operates
correctly. For more information or for any clarification, please contact one
of our service centers or any of our offices directly.
Models
C25L | C85I | C30BTL | TL20L |
---|---|---|---|
C39I | C90I | C35BTL | TL37L |
C42L | C95L | C55BTL | TL40L |
C50I | C115I | C110BTL | TL43L |
C51I | C130L | TL160L | |
C60I | LT45I | TL180L | |
C62I | DP150I | LT75I | |
C75L | DP2600I |
GENERAL WARNINGS
-
The manual refers to the C series models.
-
For a full list of the models and their sizes refer to Annex 1.
-
Read this manual carefully before using the refrigerator.
ATTENTION (for versions with R600a Isobutane Refrigerant only): risk of fire. The appliance contains inflammable gas.
ATTENTION Keep ventilation openings in the appliance’s casing or in the recess free from obstruction,
ATTENTION Do not use mechanical devices or other means other than those recommended by the manufacturer to accelerate the defrosting process.
ATTENTION Do not damage the refrigerant circuit.
ATTENTION Do not use electrical appliances or devices inside the food storage compartments if these appliances or devices are not of the type recommended by the manufacturer. Destination of the product: -
This appliance is designed for use in applications such as
o kitchen areas for personnel in shops, offices, and other work environments.
o By customers of farms, hotels, motels, and other residential environments.
o Bed and Breakfast establishments.
o In catering services and similar applications but not for retail purposes.
o In camper vans, caravans, and on pleasure craft. -
Whenever this refrigerator should replace an old type, it is recommended to make any lock unusable before scraping it.
-
This appliance may only be used with recessed installation.
-
Respect the indications of the key present on the cover (letters I / L present in the model code) for the correct installation of the appliance.
-
Follow the installation instructions given in this manual carefully.
-
It is absolutely prohibited to use the refrigerator for any use other than those intended.
-
This appliance is not designed for direct contact with food
-
The appliance may be used by children aged 8 and older and by people with reduced physical, sensory or mental abilities, and by people lacking experience or the necessary knowledge, provided that use is supervised or done after suitable instruction has been given regarding the safe use of the appliance and once there is an understanding of the danger inherent in the product and its use.
-
Children must not play with the appliance.
-
Cleaning and maintenance by the user must not be done by children without the proper supervision.
Receipt:
- The refrigerator must only be installed by qualified staff
- Check that the packaging is intact. If not, report it to the courier.
- Remove the refrigerator from the packaging, working with maximum care; in order to prevent accidental injury, the use of safety gloves is advised.
- Check that the product has not been damaged.
- Any damage must be reported to the reseller within 24 hours of taking delivery of the appliance.
Installation:
- Install the product, taking the utmost care and caution to avoid accidentally damaging the product. Use protective gloves.
- Before connecting the refrigerator, check that the network voltage corresponds with that displayed on the equipment’s identification label, or with that indicated on the label on the compressor.
- Once the installation has been completed, check that the refrigerator is not resting on a power cable.
- If the power supply cable is damaged it must immediately be replaced by the technical assistance service or by qualified personnel.
- Place the refrigerator away from heat sources, making sure that there is sufficient ventilation
- We recommend that you wait at least one hour before switching the refrigerator on, in order to allow the refrigeration circuit to be completely efficient.
- We recommend leaving sufficient space to be able to disconnect the appliance from the power supply, should the need arise.
- Series C refrigerators must be used with recessed installation.
ATTENTION: To avoid any hazard caused by the appliance being unstable, it must be fixed according to the instructions.
Maintenance and safety (all models)
- Maintenance of the refrigerator must be only be carried out by qualified staff.
- Before carrying out any maintenance or cleaning operation, disconnect the power plug.
- Keep ventilation openings free from obstructions
- Contact a suitably qualified person to clean the ventilated condenser.
- Always carry out the inspections, checks, and scheduled maintenance described in this manual.
- Do not attempt to remove, modify or repair the refrigerator.
- For any operational problems contact the Vitrifrigo Service Centre closest to you; in any case, request the assistance of a suitably qualified person.
- Do not store explosive substances in this appliance such as aerosol cans with flammable propellant.
- The appliance must not be cleaned with a jet of water.
- For appliances intended to be used at altitudes higher than 2000 m, contact the manufacturer.
- The environment in which the appliance is installed must be adequately ventilated if possible.
- If the environment, in which an appliance containing a flammable refrigerant is used, is not ventilated, the environment must ensure that, should any gas leak, it cannot reach a concentration such as to cause a fire or explosion as a result of a heat source(electric heating appliances or similar)..
Disposal
- Do not throw the packaging used for your appliance away. Separate the materials according to local waste disposal regulations.
- This product must not be disposed of with municipal waste but must be disposed of separately.
- Contact your nearest Waste Electrical and Electronic Equipment (WEEE) collection centre or take it to a retailer when purchasing a new, equivalent appliance.
- The symbol to the side indicates that the refrigerator must not be disposed of as urban waste.
- Improper disposal or incorrect use of the refrigerator is subject to administrative and/or penalties imposed by current legislation.
PURPOSE OF THE MANUAL
This manual, referring to C series refrigerators, is intended as a guide to
the appliance’s proper use and maintenance. In order to learn how to operate
and use the refrigerator, you must read this manual carefully.
In this manual, the operations related to the following are provided:
installation, operation, maintenance. The refrigerator has been manufactured
to comply with all the safety requirements given by legislation and
regulations. Nevertheless, the user’s utmost safety depends on carefully
reading this manual and on regular and careful cleaning and maintenance. Some
information or diagrams in this manual may show details or particular aspects
that might differ slightly from the refrigerator that you have purchased.
1The essential information, however, remains the same. Depending on the
constant improvement of models, this refrigerator may show variations that are
not covered in this manual. Any modifications will appear, depending on the
need, in future versions of the manual.
Identification of the manufacturer
The refrigerator has been designing and manufactured exclusively by:
Vitrifrigo s.r.l. Via Mazzini 75 – Fraz.
Montecchio – 61022 VALLEFOGLIA(PU) Italy
tel. +39 0721 154500
– fax. +39 0721 497739
e-mail info@vitrifrigo.com
www.vitrifrigo.com
DESCRIPTION OF THE APPLIANCE (fig.1)
A) horizontal evaporator A1) vertical evaporator
B) drip tray () only in some models
C) thermostat box
D) removable grilles
E) glass shelf ()
F) fruit drawer (*)
G) door shelves (removable)
The label showing the serial number and the technical data is placed inside the refrigerator. The first four digits of the serial number identify the year and the week of manufacture.
INSTALLATION
Installation key: the presence of the letters I and L in the model code
indicate the version relating to the type of installation envisaged
I = version with internal motor for recessing
L= version with remote motor for recessing (e.g. C130L = C130 model code
letter L recess version)
Ensure that the refrigerator is not damaged when opening the packaging after
receiving the product. Any transportation damage must be reported promptly to
the reseller and, in any case, within 24 hours of taking delivery of the
appliance. Handle the product with the utmost care and attention. When
positioning the refrigerant unit (in refrigerator models with a remote
refrigerant system), take precautions to avoid obstructions and breaking the
connection pipes. Always position the refrigerator and the remote refrigerant
unit (in the versions with such a solution) on a horizontal surface that can
support the weight of the appliance and its eventual contents. Once the
installation has been completed, check that the refrigerator is not resting on
a power cable. If the power cable is damaged, it must be replaced immediately
by someone from the technical service center or by someone suitably qualified,
in order to avoid any risk. Place the refrigerator away from heat sources
ensuring that it has enough ventilation as in the following installation
examples. Once the refrigerator has been positioned, wait at least one hour
before switching it on.
Recessing of the appliance with static condenser
The dimensions of the front opening envisaged for recessing the appliance must
respect the dimensions of the refrigerator and, in order to guarantee
stability, must allow for the correct assembly of the fixing frame installed
(see annex 1).
The recess must respect the minimum distances between the appliance and the
surrounding structure and it must have suitable ventilation openings
communicating directly with the free space in the room, in order to obtain
correct air circulation by means of the chimney effect, as indicated in annex
2 – figure 1. The recess must ensure that no electrically live part of the
appliance is directly accessible (thermostat, control unit, and fan),
equipping them with appropriate grilles, just like the ventilation openings.
The grilles must have openings with max. dimension of 5 mm. The ventilation
openings must have minimum dimensions of at least 75 mm in height and not less
than the dimension of the refrigerator in width if positioned above or below
the appliance (anx.2 – fig.1), or not less than 120mm in height and the
dimension of the refrigerator in width if positioned behind. (ex.2 – fig.1)
The minimum distances between the various parts of the appliance and the
recess structure must not be less than 75mm. (ex.2 – fig.1) For recess
situations in spaces where the minimum distance of 75mm is respected only in
the rear part of the appliance, make the ventilation openings on the same side
respecting the indications for the position, number, and dimensions shown in
fig.1. For recess situations with the presence of shelves in contact with the
upper and lower parts of the appliance, make the ventilation openings above
and below the appliance or in the rear part as shown in fig.1. In all the
situations of the described ventilation openings, only the minimum distance of
75mm from the sides of the appliance may not be observed.
Appliance recessing with ventilated condenser
The size of the front opening to be prepared for recessing the appliance must
respect the dimensions of the refrigerator (see annex 1).
The recess must respect the minimum distances between the appliance and the
surrounding structure and it must have suitable ventilation openings
communicating directly with the open space in the room, in order to obtain
correct air circulation by means of the chimney effect, as indicated in annex
2 – figure 2 The recess must ensure that all possible live parts of the
appliance are not directly accessible as well as the ventilation openings, by
fitting them with suitable grilles. The grilles must have openings with max.
dimension of 5 mm. The envisioned ventilation openings are:
- with dimension no less than 120 mm in height for the dimension of the refrigeration in width if positioned behind, which must always be associated to another opening of at least 120×12 mm positioned on the side of the condenser (anx.2 – fig.2).
- of dimensions 120x120mm if positioned on both sides, as indicated in annex 2 – fig.2
For recess situations in spaces where the minimum distance of 75mm is
respected only in the rear part of the appliance, make the ventilation
openings on the same side respecting the indications for the position, number,
and dimensions shown in fig.2. For recess situations with surfaces in contact
with the upper and lower parts of the appliance, make the ventilation openings
at the top and bottom of the appliance as indicated in fig.2. In all the
situations of the described ventilation openings, only the minimum distance of
75mm from the sides of the appliance may not be observed.
Appliance recess, with a ventilated remote motor.
The size of the front opening to be prepared for recessing the appliance must
respect the dimensions of the refrigerator (see annex 1). The recess must
respect the minimum distances between the remote motor and the surrounding
structure and it must have suitable ventilation openings communicating
directly with the open space in the room, in order to obtain correct air
circulation by means of the chimney effect, as indicated in the annex 2 –
figure 3 The recess must ensure that all possible live parts of the appliance
are not directly accessible as well as the ventilation openings, by fitting
them with suitable grilles. The grilles must have openings with max. dimension
of 5 mm. The ventilation openings must have dimensions no smaller than 120×120
mm and position on both sides, as per figure 3.
Appliance recess for campers, caravans and motor-homes. To install the
refrigerator or fridge units in a caravan, camper van, motor home etc. make
the recessed space in the vehicle with ventilation vents directly on the
outside, fitted with suitable grilles to ensure that all possible live parts
of the appliance are not directly accessible (thermostat, electronic module
and fan). The grilles must have openings with max. dimension of 5mm and be on
at least one side (see annex 2 fig. 1-2-3).
ATTENTION Keep ventilation openings free from obstructions in the recess.
Do not place any objects or other materials near the ventilation grilles, nor
cover or block them.
Fixing the appliance. To secure the appliance in the recessed area, use the
holes on the front base or the internal bushings of the refrigerator and
screws or the special fixing frame if present (see annex 3).
ELECTRICAL CONNECTION
ATTENTION (only for models with alternating current):
The operator must be able to disconnect the appliance from the main’s
electricity.
Make sure that there is an access point to the main’s electricity and/or that
the plant has a 6A differential magnetothermal switch with a minimum 3 mm
opening of the contacts.
Before connecting the product, make sure that the voltage corresponds to that
shown on the identification label or that shown on the label on the
compressor.
IMPORTANT: by law, the appliance must be grounded. Make sure that the
grounding system for the electrical network is working perfectly.
We accept no responsibility whatsoever for any injury to people or damage to
property deriving from the failure to properly comply with this regulation.
The use of adaptors, multiple sockets, and extension cords is not recommended.
In the event that the appliance’s plug and the socket are not compatible,
replace the plug with a suitable one.
This operation must be done by a suitably qualified person who must ensure
that the cable section of the plug is appropriate to the power absorbed by the
appliance.
Do not interconnect any other type of appliance to the refrigerator.
ELECTRIC CONNECTION FOR 12-24Vdc and 12-24 Vdc / 100-240 Vac 50/60Hz
models
It is recommended to connect the 12Vdc or 24Vdc power supply line directly to
the battery by following the corresponding instructions of the supplied
control unit (see
annex 4).
Prepare the alternating current power supply line using a three-pole cable
with a minimum section per wire of 1 mm2 and suitable isolation for the
methods and environment of use and compliant with the regulations in force.
Make the connection to the AC power line by means of a plug connection with an
adequate flow rate compliant with current regulations or prepare an omnipolar
magnetothermal differential switch with a capacity of 6 amps and with a
contact opening of at least 3 mm or nevertheless in compliance with current
regulations. Once the installation has been completed, check the continuity of
the earth circuit and carry out all the electrical safety tests provided for
by current regulations. Protect and lock the cables in order to prevent
accidental pulling of the cable from disconnecting it from the connections or
coming into contact with hot parts with a temperature above 50°C or with sharp
parts.
It is recommended that the installation of the power supply lines is carried
out by qualified personnel who will check the compliance of the unit with the
regulations in force and
issue the relative certifications of conformity.
STANDARD BATTERY PROTECTION SETTINGS
12 V cut-out V | 12 V cut- in V | 24 V cut-out V | 24 V cut- in V |
---|---|---|---|
12 V stucco V | 12 V attacco V | 24 V stacco V | 12 V attacco V |
10.4 | 11.7 | 22.8 | 24.2 |
CABLE DIMENSIONS: CONNECTION BETWEEN THE BATTERY AND ELECTRONIC UNIT
Section (mm 2 ) | 2.5 | 4 | 6 | 10 |
---|---|---|---|---|
Max. length m line at 12V | 2.5 | 4 | 6 | 10 |
Max. length m line at 24V | 5 | 8 | 12 | 20 |
START-UP
Once the plug is connected to the power outlet, the fridge will start up
automatically in thermostat mode and no further operations are required for
its correct operations.
For a reasonable arrangement and storage of food follow the table below:
Food | Preservation time | Method of preservation | Position in fridge |
---|---|---|---|
Clean meat and fish | 2 or 3 days | Exclusively wrapped or closed in airtight |
containers and placed in the fridge after they have cooled down if previously
heated| On the grille/shelf under the
freezer area
Eggs| 1 month| Use the door compartments
Butter or margarine| 1 week| Use the door compartments
Cooked foods, cakes, and soups| 3 or 4 days| On the grille in the lowest part
of the refrigerator
Cold cuts, fresh pasta, creams, puddings, chocolate, pastries, animal fats| 3
or 4 days| On any grille/shelf
Water and beverages| | Use the door compartments
Fruit and vegetables| | In the vegetable drawer, in the lower part of the
refrigerator
FUNCTIONALITY AND ADJUSTMENT OF THE TEMPERATURE
This refrigerator (all models) is equipped with a mechanical thermostat for
automatic temperature maintenance and for automatic defrosting. The
refrigerator is already factory set at the best operating temperature. To
regulate the temperature, turn the knob positioned inside the fridge, in a
clockwise direction (towards “MAX”) in order to lower the temperature, and in
an anti-clockwise direction (towards “MIN”) to increase it.
9. EXTRAORDINARY MAINTENANCE AND ASSISTANCE
Cleaning the refrigerator
Before starting to clean the refrigerator, make sure it is not connected to
the mains electricity.
OUTSIDE
Wash the outside of the refrigerator with lukewarm water, rinse with cold
water and dry with a soft cloth. Do not use abrasive or aggressive products.
Cleaning and maintenance of the condenser must be performed only by authorized
after-sales staff.
INSIDE
Remove the internal shelves, grilles (or the rack), the containers, and the
ice trays and proceed with cleaning using lukewarm water with bicarbonate of
sodium or vinegar.
Rinse and dry carefully with a soft cloth. Completely avoid the use of
abrasive products, detergents or soaps. in order to avoid the formation of
mold or unpleasant smells, unplug the appliance, empty it and clean the inside
and leave the door half-open.
If the refrigerator will not be used for a long time, disconnect it from the
electrical power supply, empty it out completely, clean it and leave the door
in the “Vent Position”(*).
Defrosting the appliance
It will be necessary to defrost the refrigerator every often when the frost
builds up to a thickness of more than three millimeters. This operation is
necessary in order to guarantee that the fridge works efficiently and to avoid
increasing electricity consumption. In order to achieve complete defrosting of
the refrigerator turn the thermostat control to the stop position. Keep the
door open so that the defrosting time is quicker.
ATTENTION: Do not use mechanical devices or other means other than those
recommended by the manufacturer to accelerate the defrosting process.
ATTENTION: Do not remove the layer of frost using pointed or sharp metal
tools that may cause a puncture in the cooling plate with irreparable
consequences for the appliance. In the holding plate refrigerators, defrosting
takes place automatically.
It is recommended to empty the drip tray daily.
Once defrosting has finished start up the refrigerator by returning the
thermostat knob to the desired position.
Replacing and reversing the door
To replace the door, refer to Annex 5; to change its opening direction, refer
to Annex 6.
Total/Partial recess profile assembly
To assemble the recessed profile, partially unscrew the screws of the profile,
sliding it flushing with the door or flushing with the casing and tightening
the screws again.
Replacing the door panel
Remove the door following the instructions given in Annex 5, then follow the
instructions in Annex 7.
Replacing the LED light profile
ATTENTION: Replacing the LED light must be done by a suitably qualified person
who is able to adopt all the appropriate safety measures. Before replacing the
light, make sure that the refrigerator is not connected to any electrical
supply. If connected, unplug the appliance from the electrical supply.
To replace the LED light profile:
- Remove, perpendicular to the base, the protective cover, being careful not to damage the fixing pins.
- Disconnect the light’s power cables.
- Replace the LED light profile.
- Connect the power source.
- Replace the cover.
TROUBLESHOOTING GUIDE
What to do if the fridge doesn’t work
Problem | Cause | Solution |
---|---|---|
The refrigerator does not cool | No electrical current | Check that the power |
supply cable is intact
and properly connected.
DC mode: Check that the battery is charged
Check that the voltage on the terminal block of the appliance’s
electronic device is the same as that of the battery.
Try running a reset| Disconnect the power cable.
Wait for a minute and then reconnect it.
The thermostat in the “STOP” position| Move the thermostat to the recommended
position
The refrigeratordoes not stop| Insufficient output| Check that:
(a) the door closes hermetically;
(b) the refrigerator is not near heat sources and is sufficiently ventilated;
(c) the condenser is not clogged with dust.
| The internal temperature is too high| Check that the door is completely
closed
The courtesy light does not switch on| The light is faulty| Call the service
center
The refrigerator is noisy| | Check that the refrigerator sits flat and is not
in direct contact with any object that might cause vibrations.
If you do not manage to achieve regular operation after these checks, contact the customer assistance service.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>