POWERTRAVELLER Tactical Extreme Solar Charger and Power Bank User Guide

POWERTRAVELLER Tactical Extreme Solar Charger and Power Bank

SPECIFICATIONS

EXTREME: POWER PACK

• Power pack with 12000mAh /44Wh
• Bi-directional USB-C input/output
• 1x DC output (12V)
• 1x USB output (5V 2A)
• 4 LED battery charge indicator
• Automatic device detection
• Rugged outer casing
• Waterproof
• Permanent on/off feature
• Size: 136 x 78 x 22mm
• Weight: 274g

EXTREME: SOLAR PANEL

• 5W clamshell solar charger
• 1x USB output (5V 1A)
• 2-Colour LED indicator to show power output strength
• Clamshell design
• MPPT technology
• Opens to 220°
• Size: 200mm x 114mm x 8mm (folded)
• Weight: 289g

KIT INCLUDES:

• Extreme Power Pack
• Extreme Solar panel
• 1x USB to USB-C connection cable
• 1x USB to Micro USB cable
• 1x USB-C to afemale USB cable
• 1x female 12V in-car charger socket
• Tactical pouch
  (Extreme Tactical only)

RECHARGES

QUICK START GUIDE

• To switch the Extreme on or off, press and hold the power button (1) . This activates the Permanent-On mode for devices drawing low power and it will remain activated until the unit is switched off. Devices drawing a larger amount of power will be automatically recognized without having to first switch on the Extreme.
• To check the charge level, tap the power button and the LEDs (2) will illuminate, with each showing a 25% increment of charge. If all LEDs are solid-on, the Extreme is fully charged. If the first LED is flashing, the Extreme needs to be recharged.
• To recharge the Extreme via the solar panel, connect the two using the supplied USB to USB-C cable between the panel’s USB output (3) and the Extreme’s bi-directional USB-C port (4) , then expose the panels (5) to direct sunlight with no obstructions (such as shadows or glass). The LED (6) will be red if the strength of the sunlight is low, and green if it is high enough to provide a charge. Readjust every couple of hours to follow the Sun.
• To recharge the Extreme via the USB-C port, connect the USB to USB-C cable and connect to a power source.
• To charge devices via the USB-C port, connect the USB to USB-C cable, or your device’s own, then connect to your device.
• To charge devices using the USB output (7) , connect one of the supplied cables or your device’s own, then connect your device. You can simultaneously charge the Extreme and charge devices form the USB output.
• To charge devices via the DC output (8) , press and hold the power button, then connect your device either directly to the port or use your device’s in-Car charger and the supplied female 12V car charger socket.

PART CODE: PTL- EXT001
EAN CODE: 5060 1 769 8446 2
UPC: 648499643898
For full details of our CE declaration – please go to
www.powertraveller.com/support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>