Norwii N86 RX Professional Presenter User Manual
- June 6, 2024
- Norwii
Table of Contents
Norwii
N86 RX Professional Presenter
User Manual
USB Receiver:
Working Voltage: 4.5-5.5V
Dimension:36×14.8 x6.5mm
Weight: 2.69g
(Plug out the USB receiver)
(Plug the USB receiver into the PC’s USB port)
3. After use, plug the USB receiver into the presenter.
Frequently Asked Questions
How to download Spotlight software and how to pair the presenter and the
USB receiver?
For products that support key function customization or spotlight serial
products that support digital laser, spotlight, highlight, you need to
The Professional Presenter download Norwii Presenter software. Please download
it from the “Downloads” under the “Support” menu of Norwich’s official website
www.norwii.com in English version.
2. After the receiver was inserted into the USB port of the computer, why
was the computer not responding or could not be recognized?
Make sure your USB port works and try other USB ports. Please try another
computer if necessary. You can check if the USB port is working properly by
inserting other USB devices into the USB port. If other USB devices work
properly on the USB port, the USB receiver fails. Please contact the seller
for repair.
If the USB port is normal, but the receiver can work on other computers, it
means that there is a problem with the computer USB driver. USB port failure,
please use other USB ports. When there is a Professional Presenter problem
with the computer driver, backup the data, reinstall the driver or reinstall
the operating system.
4. How to adjust the settings for Norwii Presenter on macOS? On macOS,
users need to add operation permissions of [Input Monitoring], [Screen
Recording] and [Accessibility] for Norwii Presenter software under [System
Preferences] – [Security & Privacy] – [Privacy]
Certifications
CE, ROHS, FDA, FCC FCC ID: 2AXGRN86
Product Support
Shanghai Norwii Technology Co., Ltd
Address: No.277 Jinfeng Road,
Pudong New Area, Shanghai, 201201, China
Tel: 86-21-51872080
Email: support@norwii.com
FCC Statement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.