Norwii S128 Wireless Microphone for UHF Wireless Voice Amplifier User Manual
- June 12, 2024
- Norwii
Table of Contents
Norwii S128 Wireless Microphone for UHF Wireless Voice Amplifier
Product Information
- Product Name: Wireless Microphone S128
- Model: S128
- Function Map: Please refer to the user manual for the function map.
Product Specification:
- Battery: 3.7V/600mAh
- Charging Voltage: DC 5V/USB-C
- Charging Time: Approximately 2 hours
- Usage Time: Approximately 6 hours
- Launch Distance: 20 meters
- Wireless Frequency: 657.5MHz-662.5MHz
Product Usage Instructions
- Charging the Microphone:
- Connect the USB-C charging cable to the charging port of the microphone.
- The red charging indicator will be continuously on when the power is off.
- The red charging indicator will automatically turn off when the battery is fully charged.
- The purple charging indicator will be continuously on when the microphone is turned on.
- The purple charging indicator will turn blue when the battery is fully charged.
- Ensure to charge the microphone for approximately 2 hours before use.
- Using the Microphone:
- Make sure the microphone is fully charged before use.
- Ensure that the microphone and receiver are within a range of 20 meters for optimal wireless performance.
- Adjust the wireless frequency of the microphone to be within the range of 657.5MHz-662.5MHz.
- Turn on the microphone by pressing the power button.
- Speak or sing directly into the microphone for clear audio transmission.
- The microphone can be used continuously for approximately 6 hours before recharging is required.
- Tips and Cautions:
- Dispose of the microphone in designated trash cans or return it to the manufacturer to protect the environment.
- The device complies with Part 15 of the FCC Rules, which means it should not cause harmful interference and must accept any interference received.
- Changes or modifications not approved by the responsible party may void the user’s authority to operate the equipment.
- If interference occurs, try reorienting or relocating the receiving antenna, increasing the separation between equipment and receiver, or consult a professional for assistance.
- Do not co-locate or operate this transmitter with any other antenna or transmitter.
Welcome to use a Wireless microphone!
This product is a UHF Wireless microphone specially designed for Norwii UHF
wireless voice amplifier. It has the characteristics of convenient connection,
strong anti-interference ability, and stable signal. It is an ideal choice for
a wireless voice amplifier. Before use, please read the instructions carefully
so that you can operate correctly.
Norwii voice amplifiers are divided into wired version, FM wireless version,
and UHF wireless version. Only the UHF wireless version of the voice amplifier
can be used with the UHF Wireless microphone.
Function map
Operation description
-
Currently, Norwii has Four models of wireless voice amplifiers (S330, S358, S358 Pro, S358 Pro+) that can be used with S128. Voice amplifier S330 wireless voice amplifier pairing method: First turn on the power supply of the wireless voice amplifier S330, press the “M” mode key to switch to the UHF mode and then press the cycle key, and the voice prompt will enter the pairing state. Turn on the power switch of the wireless microphone S128, and then press the volume “+” button and the volume “-” button at the same time. The blue indicator flashes three times for signal transmission. The wireless voice amplifier S330 will automatically match, and it will prompt you “pairing succeeded” or “pairing failed”.
Voice amplifier S358 wireless voice amplifier pairing method: First turn on the power switch of the wireless voice amplifier S358, press and hold the “PAIR” button of the wireless voice amplifier, and the red indicator turns yellow to indicate the pairing status. Then turn on the power switch of the Wireless microphone S128, and then press the volume “+” button and the volume “-” button at the same time. The blue indicator flashes three times for signal transmission. The wireless voice amplifier S358 will automatically pair. After the pairing is successful, the yellow indicator of the wireless voice amplifier S358 turns to red. -
After the pairing is successful, attach the wireless microphone S128 to the head, adjust the microphone position to the mouth, and then you can wireless sound reinforcement. Press “+” and “-” to adjust the volume.
-
When the power of the wireless microphone S128 is low, the blue indicator light will flash continuously to remind that charging is required; When charging, plug one end of the USB-C data cable into the USB-C connector of the wireless microphone S128, and connect the other end to the phone charger or computer USB port to charge. The red charging indicator is always on when the power is off, and the red indicator is automatically off when the battery is fully charged; The purple indicator light for charging is always on when the machine is turned on, and the purple indicator light for full charge becomes blue.
Product specification
- Battery: 3.7V/600mAh
- Charging voltage : DC 5V/USB-C
- Charging time: About 2 hours
- Using time : About 6 hours
- Launch distance : ＞20 meters
- Wireless frequency: 657.5MHz-662.5MHz
Tips and cautions:
- The product only supports standard 5V charging and does not support all kinds of QC fast charging. Charging with a voltage higher than 5V will burn the product or fail to charge.
- When you use it for the first time, or after a long time before you use it again, please keep the amplifier be fully charged to ensure battery life.
- Please don’t disassemble, or repair it by non-professional technical personnel. If there are any problems, please contact our company for after-sale service.
- In order to prevent the danger of short-circuiting, please keep products or accessories away from water, moisture, rain or splash.
- Do not use it in inflammable and explosive areas or in areas where radio equipment is prohibited. When you enter dangerous areas or prohibited areas, power should be turned off to avoid potential safety hazards.
- Do not use it in high temperature, high pressure, and high humidity environment (such as sunshine exposure, stove, heater, humidifier, water pool, etc.). Do not place it or close to dangerous sources (fire source, liquid, explosive, high-speed machinery, etc.) in order to avoid damage and danger.
- In order to protect the environment, please put the discarded amplifier in the designated trash can or send it back to the manufacturer. It should not be discarded at will.
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies w ith FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.