CORE INNOVATIONS CLT1164 11.6 Inch Convertible Touchscreen Laptop with Windows 10 S User Manual

CORE INNOVATIONS CLT1164 11.6 Inch Convertible Touchscreen Laptop with

Windows 10 S

Read Before Use

1. This laptop works best in non-tropical areas below 6560 feet (2000 meters).
2. Protect your device from impact from bumps and falls.
3. Do not use this device for extended periods of time in environments that are either too cold, too hot, too humid or too dusty. Do not expose the device to direct sunlight.
4. Avoid using this device in strong magnetic and static environments as much as possible.
5. If the device comes into contact with water or any other liquid, power it off immediately and wait for it to dry completely before turning it on again.
6. Do not clean the device with any cleaning products containing chemicals, to avoid damage caused by corrosion and dampness. When cleaning is necessary, use a dry, soft cloth.
7. The company shall not be held responsible for the loss or deletion of material inside the device caused by abnormal software and hardware operation, maintenance or any other accidents.
8. Please regularly back up important data and files to avoid loss.
9. Please do not disassemble the device by yourself; doing so will void the warranty.

Unit at a Glance

1. Power Button: Turn your device on or off. Use to set your device to Sleep Mode or to wake it from Sleep Mode.
2. Front Camera: Take photos and videos.
3. Touchpad: Use the touchpad to move your cursor.
4. Keyboard: Use the keyboard for typing.
5. Indicators:
6. The first light from the left indicates that the Power is on.
7. The middle light indicates that Caps Lock is on.
8. The third is the Num Lock indicator. When this light is on, you may use the secondary keys on your keyboard.
9. Microphone: Transmits audio signals.
10. Charging Indicator: Red light illuminates when connected to a power adapter.
11. Charging Port: 5V/3A charger.
12. USB Input: Connect external USB devices.
13. Mini HDMI® Output: Connect your laptop to a monitor, TV or other HDMI®-enabled device.
14. Headphone Jack: Transmit audio signals to speakers or headphones.
15. USB Input: Connect external USB devices.
16. Micro SD Card Slot: Built-in memory card reader slot that supports Micro SD format up to 64GB.
17. Speakers: Built-in 2x1W speakers allow you to playback sound without connecting external devices.

Getting Started

Fully charge your laptop for at least six hours before initial use. Use the included wall charger. The battery indicator will confirm that your device is charging.
Turn your laptop on by pressing and holding the power key for two seconds.
Once the screen is loaded, connect to your Wi-Fi® network. To wake the screen from sleep, press the power key and the lock screen should appear. Next, press the upwards arrow key () and log in. Sign in if your laptop requires a password to log in.

Use your information to create a user account. You can use this account to create, modify or remove other accounts on this device.

Interface Introduction

Windows™ 10 S Start Menu
You will see many applications fixed on the Start menu. These apps are displayed in the form of magnets, allowing you to easily visit programs at the click of a button. You will need to log in to your Microsoft™ account before the applications can fully run.
Learn more about Windows™ 10 S at:
https://www.microsoft.com/en-us/windows/s-mode

Windows™ 10 in S Mode

Microsoft™-Verified Security
With Windows™ 10 in S mode, your favorite applications, such as Office, Evernote and Spotify are available from the Microsoft™ Store where they’re Microsoft™-verified for security. Feel secure when you’re online. Microsoft Edge™, your default browser, gives you more protection against phishing and socially-engineered malware than Chrome or Firefox.

Switching out of S Mode
Windows™ 10 in S mode is designed for security and performance, exclusively running apps from the Microsoft™ Store. If you want to install an app that isn’t available in the Microsoft™ Store, you’ll need to switch out of S mode.
Note: Switching out of S mode is one-way. If you make the switch, you won’t be able to go back to Windows™ 10 in S mode. You may switch back only if a software upgrade is made available. We recommend that you back up all your files onto an external hard drive before switching OS. Switching out of S mode is free of charge.

To switch out of S Mode, follow these steps:

1. Make sure you are logged into the Microsoft™ Store.
2. In the Microsoft™ Store, search for “Switch out of S Mode.”
3. Click on the Get button. Once the software has downloaded, click on the Install button and follow the onscreen instructions to complete the setup.

Applications Introduction

In addition to the applications already fixed on the Start Menu, all other apps can be accessed from your laptop’s homepage. To add multiple apps to the Start Menu:

1. Right click on the app icon you wish to pin to the Start Menu
2. Select Pin to Start

Conversely, if you want to remove an app from the Start Menu:

1. Right click on the app icon
2. Select Unpin from Start

Downloading Apps

You can download more apps from the Microsoft™ Store found on the Windows™ Start Menu.

Note: You need a Microsoft™ account to be able to download apps. You can create an account by logging on to https://account.microsoft.com/account

Once you’ve created an account, go to the Microsoft™ Store app on your laptop and sign in by clicking the icon.

Menu Bar

The Menu bar is located within your Windows™ Start Menu, found at the bottom of your screen.

• PC: Allows you to set up, lock and sign out
• Documents: Opens the Documents folder in your laptop
• Pictures: Opens the Pictures folder in your laptop
• Settings: Setup and customize your device
• Power: Sleep, shutdown or restart your device

Search

The Search Bar can be found in your Start Menu. Use it to find documents or files stored in your device. You can also use the Search Bar to search for anything on the Web when an Internet connection has been setup. You can see notifications on the Action Center.

Cortana™

What is Cortana™?

Cortana™ is your virtual assistant. She’ll help you get things done. The more you use Cortana™, the more personalized your experience will be.
To get started, type a question in the search box, or select the microphone and talk to Cortana™. (If you would like to talk to Cortana™, make sure your mic is enabled.)
You can also set Cortana™ to respond to “Hey Cortana™” from the Settings Menu by clicking on Start > Cortana™ > Settings > Cortana™ & Search Settings.

Here are some things Cortana™ can do for you:

• Give you reminders based on time, places, or people.
• Track packages, teams, interests, and flights.
• Send emails and texts.
• Manage your calendar and keep you up to date.
• Create and manage lists.
• Find facts, files, places, and info.
• Open any app on your system.
  Note: Cortana™ is only available in certain countries/regions, and some Cortana™ features might not be available everywhere.

Multitasking

Multitasking allows you to use multiple desktops to organize your files and documents more efficiently.

1. Click the Task View button next to the search bar, or press Alt+Tab on your keyboard to switch between or view apps.
2. To use two or more apps at a time, grab the top of an app window and drag it to the side. Then choose another app and it’ll automatically snap into place.
3. Create different desktops for home and work by selecting Task View > New Desktop, and then opening the apps you want to use.

Basic Operations

Clicking on the Power Button gives you access to the Sleep, Restart, and Shutdown operations. Briefly press the Power Button on your keyboard to enter Sleep Mode.

Action Center

The Action Center allows you to view and manage your accumulated notifications. It also gives you quick access to commonly customized settings.

To open the Action Center, click on the Windows™ Key on your keyboard while pressing the letter A.

• Bluetooth®: Turn Bluetooth® on or off.
• Network: Connect to a Wi-Fi® network.
• Location: Enable or disable location settings.
• Night light: Shift your display to reduce blue light and emit warmer colors to help you get a better night’s sleep.
• Settings: Access all device settings.
• Connect: Connect to a wireless display or audio device.
• Battery Saver: Activate to save battery.
• Airplane Mode: Select to activate airplane mode.

Battery

You can view your battery status at the lower right corner of the Lock Screen or the lower right corner of Desktop Taskbar.

Connecting to Devices

You can connect your laptop to different devices with a USB cable or wirelessly via Bluetooth®/Wi-Fi®.

Pair with a Bluetooth Device®

1. Turn on your Bluetooth® device to make it discoverable.
2. Open the Action Center. Click and hold “Bluetooth®”. Select “Go To Settings”.
3. Wait for your laptop to search for Bluetooth® devices. When the Bluetooth® device appears, follow the on-screen instructions to finish pairing.

Setup a Printer or Scanner
Click “All Settings” in the Action Center > Devices.
Available printers and scanners on your Wi-Fi® network will be listed. If you do not see your printer, click “The printer that I want isn’t listed” and follow the prompts.

Project to a Second Screen
Connect your laptop to a TV or monitor via HDMI® to watch movies, work with multiple apps, share presentations and more.

Connect to a Wireless Display

1. Open the Action Center and click “Connect”.
2. Your laptop will search for wireless display and audio devices.
3. Choose the wireless device you wish to connect to and follow the on-screen instructions.

Personalizing Your Laptop

Create Tiles
Pin your favorite apps and websites to the Start Screen.
To pin an app:
Click and hold the desired app, then select “Pin to Taskbar”.
To pin a website (Microsoft Edge™ browser only):
Go to the website using the installed Microsoft Edge™ browser. Click (…) on the right hand side. Select “Pin to Start”.

Customize Your Tiles
Customize your Start Screen by changing around the tiles any way you like.

To move a tile: Click and drag to where you want it.
To resize a tile: Click and hold a tile, select “Resize” (…), and choose the size you want for the tile.
To unpin a tile from Start: Click and hold a tile. Select “Unpin from Start” (…), then “Remove the Tile”.

Background and Color
You can also customize the Start Screen colors and background. At the Start Screen, open the Action Center and click “All Settings”, then select “Personalization”.

Personalize Your Lock Screen
Open the Action Center, and click “All Settings”. Select Personalization > Lock screen > Configure your options.

Personalize Your Desktop
To customize your desktop, go to your desktop and open the Action Center. Click “Personalization”. You may now change the theme, desktop background, colors and more.

Notifications and Actions
Notifications should appear in the top right corner of the screen. To hide notifications, open the Action Center > All Settings > System > Notifications and Actions.
Lock-Screen Notifications: To edit app notifications on the lock screen, open All Settings in the Action Center. Select “Personalization”, then “Lock Screen”.
Choose apps to show a quick status.

Network

Wi-Fi® can only be used when the device connects to a Wi-Fi® Access Point (AP) or a free, unsecured Wi-Fi® hotspot.

Turn On Wi-Fi®
Within the Action Center menu, select the “Network” icon.
Under “Network & Internet Settings”, switch on Wi-Fi® to scan for available networks.
Your laptop will list the networks it finds. Click a network to connect.
When connected, the wireless indicator appears on the status bar. The white lines indicate connection strength.
NOTE: This device supports 2.4GHz Wi-Fi® networks only.

Turn Off Wi-Fi®
Under “Networks”, click Wi-Fi® again. Turn off Wi-Fi® when you are not using it to extend the life of your battery between charges.

Forget a Wi-Fi® Network
Click “All Settings” in the Action Center > Network and Internet > Wi-Fi® > Manage Known Networks > then select the network you wish to delete and click “Forget”.

Connect to a Virtual Private Network (VPN).
This laptop has built-in support for VPN. You can also install third-party VPN Software, if available in the Windows™ Store. To connect to a VPN, open the Action Center and click “VPN”. Select “Add a VPN connection” and enter a VPN to connect.

Disconnect from a VPN
Toggle the VPN switch under the Action Center. Turn off VPN when not in use to extend the life of your battery.

User Accounts

Choose whether you want to use a Microsoft™ account or a local account.

Microsoft™ Account
Use this account to sign into Windows™ and shop for apps in the Windows™ Store. All your files are also saved to OneDrive™ by default, allowing you to access them from any device.

Local Account
You can only use a local account on your laptop and cannot connect to the cloud.

Manage Your Accounts
There are two ways you can manage your accounts:

1. Action Center
   • Open the Action Center and click “All Settings”.
   • Click Accounts > Set Access for other Accounts.
2. Sign-in Options
   • You can also create a PIN password to sign in to your laptop. To access other sign-in options, go to “All Settings” in the Action Center. Click “Accounts”, then select “Sign-in Options” and follow the on-screen instructions.

Change your Password

1. Open the Action Center > Tap “All Settings”.
2. Click “Accounts” > “Sign-in Options”.
3. Choose “User Accounts” from the search results.
4. Under “Password”, select “Change” and follow the on-screen instructions.

Lock or Sign Out
Your laptop will automatically lock when not in use for a while. You can manually lock or sign out from the Start Screen by clicking the “More Options” icon ( ) on the top left.

Ease of Access

Ease of Access settings allow you to customize your laptop’s accessibility settings to cater to your needs.
For Ease of Access Settings:

1. Open the Action Center > click “All Settings”
2. Click “Ease of Access”.
3. Configure your settings.

Laptop Settings

• Activate Windows™: Install the latest version of Windows™ on your laptop with your product key.
• Devices: Manage your laptop settings, including display, typing, power and sleep. Manage Bluetooth® and other devices. Get laptop information.
• Accounts: Manage and create different user accounts.
• Privacy: Change your privacy settings, location settings, webcam settings, microphone settings, etc.
• Network: Manage your network connections.
• Time and Language: Set date and time. Set region and language.
• Ease of Access: Control accessibility settings: narrator, magnifier, high contrast and keyboard options can be adjusted to your needs.
• Update and Security : Update Windows™, save copies of your settings and recover or reinstall your laptop. Change security settings.

Restart

Refresh Device

1. In the Action Center, click “All Settings”
2. Click on “Update and Security”, then click “Recovery”
3. Choose how you want to refresh the device

Restart Device

1. In the Action Center, click “All Settings”
2. Click on “Update and Security”, then click “Recovery”
3. Choose “Restart Now”

Specifications

• Processor: Intel Atom® Z8350 Processor
• Operating System: Windows™ 10 Home in S Mode
• Storage: 4GB RAM, 64GB Storage
• Display: 11.6” IPS Screen (1366×768)
• Network Headphone: Wi-Fi® Ready: 802.11 b/g/n
• Output: 3.5mm Headphone Jack
• USB Ports: USB Inputs x 2
• HDMI®: Mini HDMI® Output
• Bluetooth®: Compatible with Bluetooth®
• Camera: 0.3 MP
• Power: Rechargeable Li-Polymer Battery DC IN 5V/3A
• Speakers: 2×1 W Speakers
• Charging: 5V 3A

Need Help?

For customer support regarding your device, please submit a request by emailing support@dpaudiovideo.zendesk.com. You will be provided a ticket number regarding your inquiry, which you can refer to when contacting
us further.

You may also reach a Core Innovations customer service representative by calling 1-833-909-CORE (1-833-909-2673). We are available Monday – Friday, 9am – 5pm PST, except major holidays. Core Innovations strongly urges customers to email their inquiry prior to calling, as this will enable us to better assist you.
Please make sure to note the model number and a description of your inquiry.
Thank you for purchasing a Core Innovations product.
© 2021 Core Innovations. All rights reserved. Core Innovations is a trademark of Core Innovations LLC. Formatted capacity will be less. Windows, OneDrive and Cortana are registered trademarks of Microsoft Corp in the United States and other countries. Intel, the Intel logo and Intel Atom are trademarks of Intel Corporation or its subsidiaries. © 2021 Bluetooth SIG, Inc. All rights reserved. The Bluetooth trademarks—including the BLUETOOTH word mark, the figure mark (the runic “B” and oval design), and the combination mark (Bluetooth word mark and design)—are owned by the Bluetooth SIG. Wi-Fi is a registered trademark of the Wi-Fi Alliance. The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries and used by Core Innovations under a permissions process granted to the manufacturer as an adopter. USB and MicroSD are used to solely describe the compatibility of our technology and in no way is intended to infringe on any intellectual property rights of any respective protected marks. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. MicroSD card not included. Core Innovations is not affiliated with MicrosoftTM. 1 year warranty from date of purchase, 90 days only on labor.

Warranty Information

Limited Warranty
Core Innovations (the “Company”) warrants the product purchased and contained in this package (the “Product”) against defects in material or workmanship for 90 Days (Parts & Labor) and 1 Year (Limited). In order for the Company to honor this limited warranty, you must present a valid proof of purchase (i.e. a receipt) of this Product.
This warranty is void if the Company deems, in its discretion, that the Product may have been damaged through modification, improper use, end user negligence, water damage or tampering of the barcode of the Product. This warranty is a limited warranty for repair/replacement of the Product, subject to the conditions set forth herein.
The Company is not liable for consequential, indirect, incidental, special or punitive damages and the Company’s total liability hereunder shall not exceed an amount greater than the retail purchase price of the product.

90 Days Parts & Labor

The Company warrants to you as the original retail purchaser of the Product, that should the Product have any defect, under normal conditions, such defect(s) will be repaired or replaced with a new or refurbished part (at the Company’s sole discretion) without charge, if the Product is submitted to the Company within a period of ninety (90) days from the date of purchase of the Product. The customer is responsible for transportation cost and insurance charges (if applicable) to the Company. It is the customer’s responsibility to retain original packaging or provide like packaging in order to facilitate the warranty process. The Company will incur no liability whatsoever to provide packaging for warranty items. Should the product be damaged due to insufficient packaging, the warranty may be voided. You must receive a return authorization number (RMA#) before sending the unit in for service. This warranty only applies to manufacturer defects, and the Product must be returned to the Company in its original condition.

1 Year Limited Parts

The one (1) year limited parts warranty gives you the option to return the Product to the Company for repair or replacement. The customer will be responsible for labor charges. This warranty does not cover any incidental or indirect costs incurred as a result of a defect in the Product, including any consequential, incidental or indirect damages.

Core Innovations intends to make this manual accurate and complete. However, Core Innovations makes no claim that the information contained herein covers all details and conditions. The information in this document is subject to change without notice at any time. Core Innovations assumes no responsibility for accuracy or completeness of the information contained in this manual.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

References

• Windows 10 and Windows 11 in S mode FAQ
• Zendesk: The Complete Customer Service Solution

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>