Empowerment IP10MDCB1 3K Plus Guard Pro PTZ Dual Lens Camera User Guide

Empowerment IP10MDCB1 3K Plus Guard Pro PTZ Dual Lens Camera User Guide

Product Using Instruction

1. Select the Wi-Fi network you want to connect your camera with. Only available 2.4 GHz Wi-Fi networks show here. Enter your Wi-Fi Network password then tap “Next”.
   Note: If your Wi-Fi network is not listed here, please refresh the page.
   

2. Please wait while the device connects to the server.
   **Note: Make sure your phone is connected to the same network.

**

3. Name your device. We recommend naming your camera if you are connecting more than one camera. Tap “Done”. Your device has now been added successfully.
   Note: Please repeat these steps for each additional camera you want to connect.
   

Insert A Micro Sd Card

Recordings can be locally stored on a Micro SD card, to insert or swap out your Micro SD card please follow the steps below. The maximum size Micro SD card is 256GB.

1. Remove the lower cover by unscrewing the Philips screws to access the SD card.
2. If swapping out a current Micro SD card, gently press on the card, it will pop out.
3. When inserting your Micro SD push it in until you hear a click sound.

Position and Install Your Camera

| IMPORTANT: Before mounting your camera, use the app to test your Wi-Fi strength and video feed. Plug the camera in the area you’ll be monitoring and view your footage to ensure you have a clear, uninterrupted view.
---|---
To check your network signal strength, tap > Tools > Wi-Fi Detection Tool > Wi-Fi Detection
Note: Cement walls, exterior finishes, and thick insulation can significantly affect Wi-Fi signal strength.
| Using the recommended tools, install your camera in a preferred place, at a height where you can clearly see faces. Make sure there is a nearby power outlet.
TIP: Your Guard Pro Camera comes with a 25ft. extension cable, giving you 35ft. to mount your camera from the power outlet.
IMPORTANT: The Camera Power Supply is NOT waterproof.

CAMERA MOUNTING OPTIONS

USING THE APP

The Defender Guard App allows you to remotely view live video or playback recorded footage, save and share recordings, share App access and more. Scan the QR Code!

FREQUENTLY ASKED QUESTIONS

HOW MANY CAMERAS CAN I CONNECT TO THE DEFENDER GUARD APP?

You can connect a total of 16 cameras to the Defender Guard App and view up to 4 cameras at once. We recommend no more than 6 Guard/Guard Pro/Guard Pro PTZ/ 4K Guard Pro cameras be connected in the same home/building to avoid interference issues.

CAN I ALLOW OTHER PEOPLE TO VIEW MY CAMERA(S) REMOTELY?

You may share the Defender Guard App access with up to 5 additional users. Each user will need to download the Defender Guard App and create their own account before sharing access.

IS 3K GUARD PRO DUAL-LENS COMPATIBLE WITH ANY DEFENDER CAMERA SYSTEM?

3K Guard Pro Dual-lens is only compatible with the Defender Guard, Guard Pro, Guard Pro PTZ & Guard Pro Dual-lens camera. It cannot be used with any other Defender Camera system. Guard/Guard Pro/Guard Pro PTZ cameras use the Defender Guard App.

CAN I VIEW MY LIVE OR RECORDED FOOTAGE FROM A WEB BROWSER?

We do not offer web viewing. You can view the footage from the free Defender Guard app with compatible IOS/Android smart phones/tablets. Alternatively, you may export the footage from the SD card onto a personal computer using a compatible SD card reader.

References

• Extended Warranties
• Activate my Warranty

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>