Govee B5178 Smart Indoor Outdoor Thermo Hygrometer User Manual

Govee B5178 Smart Indoor Outdoor Thermo Hygrometer User Manual

Safety Instructions

• The device should work in an environment with a temperature ranging from -20°( to 60°( and humidity from 0% to 99%.
• Remove the batteries if not using the device for an extended period.
• Prevent dropping devices from the high place.
• Do not disassemble devices violently.
• Do not immerse the device in water.

What You Get

At a Glance

Using Your Device

Pairing Your Device with the Govee Home App

What You Need:

A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).

(1) Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).

(2) Turn on the Bluetooth in your smart phone.
(3) Open the app, tap”+” icon in the top right corner and search “85178”.
(4) Tap the device icon and follow the on-screen instructions to complete pairing.

Pairing the Indoor Device with the Outdoor Sensor

Notice:

a. The Indoor Thermo-Hygrometer has paired with the outdoor sensor by default;
b. lf you need to repair or pair with a new device, please follow steps below.

1. Press the button on the indoor device and hold for 3s until outdoor readings on the screen flash, indicating the indoor thermo-hygrometer gets ready for 433 pairing;
2. Remove the batteries in the outdoor sensor then re-insert them. The outdoor sensor begins to pair when the indicator light flashes blue;
3. The pairing is complete when the outdoor readings update and stop flashing on the screen.

Specifications

Troubleshooting

(1) Cannot connect to Bluetooth.

• a. Make sure Bluetooth in your smartphone has been turned on.
• b. Connect to the thermo-hygrometer in the Govee Home app instead of Bluetooth list in your smartphone.
• c. Keep the distance between your smartphone and the indoor thermo-hygrometer less than 50m/164ft.
• d. Keep your smartphone as close to the Indoor Thermo-Hygrometer as possible.
• e. Make sure that Android device users turn on Location and iOS users select “Setting – Govee Home – Location – Always” in the phone.

(2) Data in the app is not updated.

• a. Make sure the device has connected to the Govee Home app.
• b. Location and iOS users should select “Settings – Govee Home – Location – Always” in the phone.

(3) Cannot export data in the app.
Please sign up or log into your account before exporting data.

(4) The indoor device cannot pair with the outdoor sensor.

• a. The indoor thermo-hygrometer has paired with the outdoor sensor by default.
• b. Check whether the battery is running low.
• c. Place the Indoor Thermo-Hygrometer near the outdoor remote sensor.

Compliance Information

EU Compliance Statement:
Shenzhen lntellirocks Tech Co. Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.govee.com/

(EC| REP ) EU contact address: BellaCocool GmbH (E-mail: info@bellacocool.de)
PettenkoferstraBe 18, 10247 Berlin, Germany

CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Govee is a trademark of Shenzhen lntellirocks Tech Co. Ltd. Copyright ©2020 Shenzhen lntellirocks Tech Co. Ltd. All Rights Reserved.

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little
personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Customer Service

support@govee.com
www.govee.com

Facebook
YouTube
Twitter
Instagramhttps://www.govee.com/apps/qrcode

For FAQs and more information, please visit: www.govee.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>