IKEA 704.058.65 ANSLUTA LED Driver with Cord Instruction Manual
- June 6, 2024
- Ikea
Table of Contents
IKEA 704.058.65 ANSLUTA LED Driver with Cord
Good to know
- The device may get warm during use this is completely normal.
- Operating temperature: 5°C to 35°C (41ºF to 95ºF).
- Unplug the product from the power source before cleaning.
- To clean the product, wipe with a dry cloth.
- Never submerge the product in water.
WARNING
- Use only indoors in dry areas.
- Children should be supervised to ensure they do not play with the product.
- If the cord is damaged the appliance shall be destroyed.
- Do not cover when in use.
- Do not overload the product.
Save these instructions for future use.
Technical data
Type: ICPSW24-19-1 Input: 100-240 VAC, 50/60 Hz, 0.4A, 23.0W Output: 24.0 V DC Max total load: 0.8A, 19.0W Indoor use only
Manufacturer: IKEA of Sweden AB Address:
Box 702, SE-343 81 Älmhult, SWEDEN This device complies with Part 15 of the FCC Rules. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation Science and Economic Development Canada’s license- exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation of the device.
WARNING:
Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC Statment
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the quipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>