SEALEY TP501 Fluid Transfer Pump Instruction Manual
- June 3, 2024
- SEALEY
Table of Contents
SEALEY TP501 Fluid Transfer Pump
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY INSTRUCTIONS
- WARNING! DO NOT operate using flammable liquids in a confined space, the area should have adequate ventilation.
- If pumping flammable liquids, avoid proximity to naked flames or welding operations.
- Wear appropriate protective clothing when pumping solvents. We recommend eye/face and hand protection, available from your authorized Sealey dealer.
- Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.
- Ensure spillages are dealt with immediately. Failure to do so could lead to personal injury or damage to the environment and possible prosecution by the authorities.
- Keep children away from areas where solvents are being used.
Specification
Brass-constructed pump suitable for siphoning a variety of fluids including oils, coolants, transmission fluid, diesel, and antifreeze. Fitted with removable neoprene end caps. Supplied with 1m x 6mm intake hose and 600mm x 12mm discharge hose. Ideal for draining gearboxes and differentials. Delivers approximately 100ml per stroke.
Assembly / operation
- Insert the 600x12mm discharge hose to the outlet (fig.1A).
- Insert the 1000x6mm intake hose to the inlet (fig.1B).
- Ensure the discharge hose is placed into a container suitable for the substance and quantity to be transferred.
- Raise and compress the handle (fig.1C), fluid should begin to flow after 3 strokes.
NOTE: It is our policy to continually improve products and as such, we
reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: The guarantee is 12 months from the purchase date, proof of
which will be required for any claim.
INFORMATION: For a copy of our latest catalog and promotions call us on
01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group, Kempson Way, Suffolk Business Park, Bury
St. Edmunds, Suffolk,
IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
sales@sealey.co.uk