Dongguan Mingxuan Electronic Technology Co Ltd MX-1413 Multi-Functional Night Light Instructions
- June 1, 2024
- Dongguan Mingxuan Electronic Technology Co Ltd
Table of Contents
Dongguan Mingxuan Electronic Technology Co Ltd MX-1413 Multi-Functional
Night Light
Product Information
Specifications:
- Model: MX-1413
- Type: Night Light
- Power Input: DC5V 1500mA
- Battery: 1500mAh Rechargeable
- Charging Port: Type C
- Bluetooth Name: MX-1413
Product Usage Instructions
Power and Charging:
The night light is powered by a rechargeable 1500mAh battery. To charge the
device, use the Type C adapter. A red light indicates charging, and a green
light indicates full charge. Disconnect the battery when fully charged to
preserve battery life.
Lighting Functions:
To turn on/off the light, long press the switch. Adjust brightness by long
pressing and change color by short pressing. The light can display colorful
automatic slow flashes or flashes.
Timer Function:
To set a timer, long press the switch and select from 15 minutes, 30 minutes,
or 60 minutes. The timer can be canceled by pressing the switch again. The
timing indicator light next to the charging port shows the selected timer
duration.
Bluetooth Music:
The night light can play Bluetooth music. Connect your mobile phone to the
device using Bluetooth with the name MX-1413. Switch between built-in music
tracks by short pressing the switch.
Call Functions:
During a call, long press to reject and short press to answer. For non-call
status, double-click to call back the last number. Short press to hang up a
call.
Volume and Music Control:
Adjust volume by long pressing the switch and pause/play music by short
pressing. Skip to the next music track by short pressing as well.
Frequently Asked Questions (FAQ):
How do I know when the battery is fully charged?
The charging indicator light will turn green when the battery is fully charged.
Can I adjust the brightness and color of the light?
Yes, you can adjust the brightness by long press and change the color by short press of the switch.
How do I set a timer for the night light?
Long press the switch to enter timer mode, then select either 15 minutes, 30 minutes, or 60 minutes. Press again to cancel the timer.
OVERVIEW
FUNCTION
- Long press switch, short press timing function. Timer is 15 minutes, 30 minutes, 60 minutes, timer is canceled. The timer function is cancelled when the timer is turned off. The timing indicator is beside the charging port.
- When calling: Long Press reject, short press answer.
- Go to Word: short press hang up.
- Calling: Short Press to hang up.
- Non-call status: double-click to call back the last number.
- Adjust the light intensity by long, adjust the light color by short, colorful light display. Colorful automatic slow flash, colorful automatic flash flash.
- Short Press on/off sound, long press adjust volume (big-small, small-big).
- Short-press to switch to the next music, the selected music will automatically loop when using the built-in music.
- Native Bluetooth name: MX-1413.
- In the boot state, the mobile phone searches for this device and selects the connection.
- Voice prompt when connected. Can Play Bluetooth music.
- When disconnected, the computer automatically returns to the built-in music mode.
- This machine can be recharged through the Type C adapter, charging red light, full green light.
Product details and notes
- DC5V charging, charging red light, electricity has been charged to blue. The product is powered by a large capacity 1500MA rechargeable battery. Please disconnect the battery when it is fully charged.
- The timing indicator lamp next to the charging port, press the first 15 minutes, the second 30 minutes, the third 60 minutes, the fourth light off to remove the timing function.
- Can be used to connect to Bluetooth mobile phone. Bluetooth name: MX-1413.
- Sleep lamp music should not be too loud.
- Product has low voltage protection, when the voltage is below the set value will automatically stop working. For battery and product protection, please charge it in time.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
The device has been evaluatec to meel general RF exposure requirement. The
device can be used in porlable exposure condition without restriction.