BEOK TDS21 WiFi Heating Thermostat Instruction Manual

BEOK TDS21 WiFi Heating Thermostat

TDS21 WIFI HEATING THERMOSTAT

 Product Summary

TDS21 WiFi Heating Thermostat is WiFi touch screen thermostat with phone control. It is applied to temperature control of industrial, commercial and domestic room, and start of control heating appliances, especially floor heating systems. It can be controlled by phone. Phone systems are IOS and Android system optional.

Technical Parameter

≤16A(electric heating)

Power Consumption| <0.3W
External Material| PC+ABS (flame retardant）
Sensing Element| NTC
Set Temp. Range| 5-60℃
Floor Set Temp. Range| 5-99℃
Accuracy| ±1℃
Dimension| 86x86x13.3mm
Ambient Temp.| 0-45℃,5-95％RH(Non-condensing）
Storage Temp.| -5~55℃
Timing Error| <1％

Main Functions and Characteristics

1.  WIFI for Android & Apple iOS
2.  Large screen display and touch button
3.  Power-off memory function
4.  Real-time data save function
5.  5+2 or 6+1or 7days six periods program schedule
6.  Anti-freezing function
7.  3 sensor modes can be set
8.  Selectable 80mmx80mm European hidden box.
9.  With child lock function

User Interface Explanation(Thermostat Port)

User Interface Explanation(Phone Port)

Model Spec

Week Program|

Controlled Objects

---|---

TDS21WIFI-EP

|

16A

|

For electric heating appliances

TDS21WIFI-WP

|

3A

|

For water heating appliances

DS21WIFI-WPB

|

3A

|

For gas boiler

Wiring Digram

Thermostat Operation Instruction

Setting Power on/off Press to turn on/off the power.
Setting Temperature

• Press to set the temperature.

Setting the Clock

• Press to set the minute, hour and week.
• Press for adjusting.

Setting the Manual Mode.

• Manual mode means non-programmable mode.
• will display on the screen, it is in manual mode.
• Press to set the temperature. Press to set the minute, hour and week.

Setting the Programmable Mode.

• Press and hold into programmable mode. LOOP and 12345 will display.
• Press to select the control way: 5+2 or 6+1 or 7 days programmable.
• 12345 display in the position of the week means 5+2;
• 123456 display in the position of week means 6+1;
• 1234567 display in the position of week means 7 days programmable.
• Press to select the periods.
• Press to change the temperature;
• Press to do time adjustment.
• Press to change the time;
• Press again to select the weekend’s temp.
• If you want to make a temporary adjustment in any period, press then will flash. When finish the setting, all will confirm automatically.

Week

| 1| | 6:00| 20℃
2| | 8:00| 15℃
3| | 11:30| 15℃
4| | 12:30| 15℃
5| | 17:30| 22℃
6| | 22:00| 15℃

Weekend

| 1| | 8:00| 22℃
2| | 23:00| 15℃

Remark:

1.  The defaulted temperature of period3 and period4 is the same as period2. Please change it according to the request.
2.  When setting temperature is 00, this period is power off.
3.  How to check floor temp? check floor temp.. OUT TEMP will display. Press again to display room temp..

 Advanced Setting

In the state of power-off, long press and hold advanced setting mode. Then press to set relative item.

SEN

|

Sensor mode

| 0:Internal sensor 1:Floor sensor

2:Both internal sensor and floor sensor

|

0

OSV| Set temp. range

for floor sensor

| 5-99℃| 42℃
DIF| Precision for floor temp.| 1-9℃| 2℃
SVH| High limit temp. for internal sensor| 5-99℃| 35℃
SVL| Low limit temp.

for internal sensor

| 5-99℃| 5℃
ADJ| Measure temp.| Check and calibrate the actual room temp.| 0.5℃accurac calibrate
FRE| Anti-frozen| 00：Close anti-frozen

01：Open anti-frozen

|

00

PON| Power memory| 00：Power memory off 01：Power memory on| 00
DFI| Precision for room temp.| 0.5~3℃| 1℃
FAC| Factory setting| 10 or 32:Wifi mode open

08：Just display

| 08

Remark:
Deadzone for floor temp.: i.e. the setting deadzone for floor sensor is 2, OSV is 42℃ when actual temp. reach 44℃, the relay will stop working; when actual temp. is back to 40℃, the relay starts working again. It works when room temp. is lower than set temp.

Sensor error:
Please select the right sensor mode. If select a different mode or there is an error of the sensor, Err will display on the LCD screen, the thermostat will stop heating till the problem is solved.

Phone Port Operation Instruction

Install APP on phone
For iOS system: Login in App Store, search “ Back Home”, you can download it on your iPhone.
Or scan the below code to download:

For Android System: Login in Google Play, search “Book Home”, you can download it on your phone. Or scan the below code to download:

Connection Thermostat with Phone

Thermostat Setting

Hold on Clock key, then press Power key.

Go into Advanced Setting, press Menu key 9 times until FAC mode appears.

When FAC appears, press UP key to change from 8 to 10 or 32.

Then, press power off.

Hold on Clock key, then press Power key again.

At this time, wifi symbol will be twinkling quickly and frequently. It means, you can connect thermostat with phone now.
When wifi symbol stop twinkling, it means thermostat is successfully connected with phone.

Connection with Phone

Open Beok Home APP on your phone, you can see APP welcome page

When the thermostat Wifi Symbol twinkling fast, you can start the configure on your Phone.

Enter your wifi name and password, then start connection a t below. When connection success, it will appear “Connection Success”.

After connection success, you need press “Search “ key.

Then it will appear your wifi thermostat HVAC. HVAC is the factory setting name, when you have more than 2 thermostats, you can change it to any name you want.

•  Long press HVAC for 5 seconds, it will appear Edit Thermostat page.
•  Press Modify Current Thermostat.
•  You can change HVAC to room 1, Bedroom Bath room, or anything you like.

**APP Interface on the Phone

**

Thermostat Setting through Phone Operation

1.  Clock: You can press Time Matching switch to match your phone clock with the thermostat clock.
2.  Children lock (screen locking) : Press to lock the thermostat.
3.  Anti-Freezing: Press thermostat will show on the screen, it means the Anti-freezing function is open.
4.  Temperature setting: You can drag the pointer on Temperature Setting Dial to set the temperature. Or press and to set temperature step. directly
5. Period setting: Long press Period Display, then you will go into the Period Setting mode:

Touch work loop: you can choose the week program mode: 5+2/ 6+1 /7. Touch each time value: you can set the time of the period.
Touch each temperature: you can set the temperature of the period. Notice: When you choose the program mode to 7, Weekend program data set will no appear.

6. Advanced Setting: Long Press Senior setting mode:

SEN

| Sensor mode| In-s control Out-s control

In-s control., Out-s limit

|

In-s control

OSV| Floor set temp. range| 5-99℃| 42℃
DIF| Floor temp. ctrl diff| 1-9℃| 2℃
SVH| Room temp set max| 5-99℃| 35℃
SVL| Room temp set min| 5-99℃| 5℃
ADJ| Room temp. adjust| -5-5℃| 0℃
FRE| Anti-frozen| close/open| Close
PON| Power memory| off/on| On

Attention to Phone WiFi Connection:
After you press Configure, if connection fails:

•  Please confirm your mobile phone is set to WLAN mode, and ensure its (mobile data)3g/4g is turned off. Please connect to 2.4G wifi, not 5G wifi.
•  Please add your wifi router name, we recommend it does not include spaces or Chinese symbol.
•  Please check your wifi router password. We recommend not over 32 characters, no spaces, no blank password, no special symbols except letters and numbers.
•  Please check module is successfully reset . In power-off state, press Time key firstly, then press Power key to enter Advanced Setting. Find

Press Time key within 2 minutes, then press Power key again. This time, it will not enter Advanced Setting, but WIFI symbol on the LCD screen will be flashing quickly and frequently. This means wifi module has been reset successfully. Then wait for APP to connect well.

•  Please confirm wifi password is correctly filled. We recommend you check password to be visible when it is input.
•  If it displays the following reminder, please go to Advanced Setting to reset corresponding setting.

Installation Instruction
This product is suitable for standard 80*80mm wall box and 60 mm european round box.

1.  Connect the line of power and valve into the terminals. Fix the wall plate into the wall box by a screwdrive.
2.  Connect the lines with the LCD board.
3.  Connect the LCD board into the wall plate.
   NOTICE: The installation wire should be 1.5-2.5mm2.

ATT:
Thank you for buying this product!
Please read this manual for complete instructions on installing and operating your thermostat. If you require further assistance, please feel free to contact us.
In the box you will find:

n the box you will find:|
---|---
Model| TDS21WIFI-EP| TDS21WIFI-WP| TDS21WIFI-WPB
Thermostat| √| √| √
User Manual| √| √| √
Screws| √| √|

√

External sensor| √| |

Our Service:
We offer the warranty of 24 months from the sales day.
During the warranty, if it is belong to the quality issue, we will fix or replace them for you by free after test them.
If it is not quality problem or beyond the warranty time, we will charge for the after-sales service.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>