Lefei CSTR0504 LED strip lights User Manual
- June 6, 2024
- Lefei
Table of Contents
Lefei CSTR0504 LED strip lights
User Manual
Thank you very much for choosing from Enteenly. This led strip to adopt the current emerging APP technology and top manufacturing process, which is developed integrating years of R&D experience. The led strip can be controlled by remote or App. For proper installation and usage of the product, please read this instruction carefully.
Product Parameters
- Working Voltage: DCSV
- Current: 3A x 1CH
- Working temperature: – 10 C – 45 C (140 F – 113 F )
- Humidity: <80% RH
Connection
Connect the led controller to your LED strip and power, the below photo is for your reference.
Remote Control
Please point at the sensor of the remote control receiver to control the light.
Warranty instructions
The one-year warranty of our products is only applicable to all operations that conform to the instructions. The warranty does not include the following:
- Any change, amendment, deletion or scribbled purchase labels or instructions.
- Failure due to damage, incorrect connection, or misuse.
- Because of the natural environment rather than the inherent causes of the product (such as lightning, flood, etc.).The bad phenomena of fire, etc.
- The product has been opened or disassembled.
- Adverse consequences arising from use, maintenance, or custody do not conform to product specifications(e.g. damp, corrosive).
- Any other matter caused by a product defect, appearance distortion, appearance damage or external force Physical injury.
Note
With the USB plug, the fairy light can be powered by wiaipretop, power bank,
wall charger and etc.. please ensure that the input voltage is DCSV. over
voltage will damage the Bluetooth controller and the copper
http://www.easytrack.net.cn/download/149FENGTU
App introduction
6.1 Main Interface
6 2 Group Management
NOTE: Enter the device’s first interface once again. Click the device
fist icon in the upper left caner of the interface. Refresh the device list
6.3 Style Mode 6.4 Music Mode
6.5 Mic Mode
6.5 Schedule Mode This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Contact Information
Manufacturer: OYA Smart Lighting (Shenzhen) Co., Ltd
Address: No.32 Second Road
New Qiaotang Industry.
Dalang. Longhua, Shenzhen,china
Email Iedsupport@en-teenly.com
Company:E-CrossStu GmbH
Address: Felix-Dahn-Str 4,
70597 Stuttgart