Lefei LED Strip Light Kit User Guide

: June 6, 2024
: Lefei

Table of Contents

Lefei
Documents / Resources
Read User Manual Online (PDF format)
Download This Manual (PDF format)

`Lefei`

LED Strip Light Kit

What’s in the box

Led strip X 6
FPCB connector x 5
Power adapter x
Led strip buckle X 6
Cable buckle X 2
Sticker with Velcro for the Remote x 1
RF Remote X 1
Controller box X 1

Specifications

Power Adapter:
Input: 100-240Vac 50/60Hz 0.5Amax
Output: 12Vdc 1A
Rated power: 12W
LED Strip:
Working voltage: 12V
Rated power: 3.8W/meter
Color Temperature: 3000K/6500K
Ra: >80
Lumen: 320Im/meter
Led quantity: 60Ied/meter

RF Remote Control and Controller Function

Installation

Connect the power adapter to the controller and then connect the theme led strip to the controller. The controller has 2 output connectors, you can use one or both. The length of the light strip can be DIY at will.
Tear off the double-sided tape on the back of the light strip.
The installation surface needs to be cleaned and dry first, and then stick the led strip on the installation surface.
You can DIY the length of the led strip according to your requirement, the led strip can be cut every 50mm as the “cut” mark shows. Please note that the best part of the led strip may not be usable when you cut it!
Use the FPCB connector to connect the led strip at the corner position, and fix the led strip with the led strip buckles.
Fix the cable with the cable buckles.
The sticker for the RF remote is with Velcro. You can put the remote back on the wall when you are not using it. No need to find the remote all over the house when you need it.

Precautions

It is strictly forbidden to install the product on flammable and explosive objects.
It is strictly forbidden to use it in a high temperature, corrosive, and airless environment.
It is strictly forbidden to install electricity. For safety reasons, please use the adapter we provide only.
It is strictly forbidden to change or destroy the circuit and components of the product.
During installation, avoid dragging and knotting the product on the ground to avoid irreparable damage to the product.
To avoid damage to the power adapter, please do not connect more than 3meter of the led strip on one power adapter.
When the light strip is rolled or the package is not removed, please do not light the light strip for more than 60 seconds. Or the led strip may be damaged because of overheating.
Cut: Please cut at the place where the cutting position is marked, otherwise one of the led will not work.
Please avoid multiple bending to avoid product defects.
When the LED is on, please do not look directly at the light source for a long time, the strong light may hurt your eyes.
Non-professionals are not allowed to disassemble and repair the product.
Storage temperature: -30-80 C.
Working temperature: -20-45 C.