HAYLOU MoriPods ANC True Wireless EarBuds User Manual

HAYLOU MoriPods ANC True Wireless EarBuds

Overview

How to Wear

Gently insert the earbud into the ear canal, adjust the earbud to the most comfortable wearing state.

When calling, adjust Mic towards mouth to gain better talking experience.

How to Charge

For first time use, please remove the isolation film on the charging contacts of both earbduds. Then fully charge the charging case and earbuds.

Plug in the charging cable to charge the earbuds and the charging case at the same time. The charging indicator light will be solid white when the charging case is not fully charged. The indicator light goes out after fully charged.

Power-on

1.  Take out to auto power on when the earbuds are in case.
2.  If earbuds are out of case and in power-off state, keep touching the MFB button for about 1.5s to power on.

Power-off

1. The earbuds will auto power off when put in the charging case.
2. Keep touching the MFB button for 4.5s to power off.

How to Pair

Take two earbuds out from the charging case simultaneously, then open device Bluetooth and search for “Haylou MoriPods ANC”, finally click it to complete the connection. Put the earbuds back to the charging case and repeat the above operation if the connection fails. After the first connection, the earbuds can be automatically connected to the last paired device (Bluetooth needs to be turned on).

Switch between mono and stereo mode: It is stereo mode after two earbuds are successfully connected. Put one back into the case to power off, the other will enter mono mode. Or pick it up again to resume stereo mode Manual connection: when earbuds are turned off, manually turn on both of them. Wait 2-3 seconds for them to turn on and connect to each other. Turn on device Bluetooth to connect when light on single earbud flashes white slowly.

Functions

Answer the Second Call When there is a new incoming call during a call, short touch the MFB button to hold the previous call and answer the second call, then double touch the MFB button to switch the call, hold the current call, switch to the previous call, and then short touch the MFB button to hang up the current call and answer the call on hold.

Factory Setting

1.  Put the earbuds back into the charging case and keep the charging case fully charged. Then long touch the earbuds MFB buttons for 10s;
2.  Clear phone pairing record and TWS pairing record, then turn off, and complete the connection again.

Common abnormals:

1.  One of the earbuds is mute: Try to put the mute earbud into the charging case and then take it out; If the problem is still not solved after the above operation, try the reset steps;
2.  The earbud cannot be charged: Check whether the charging case has sufficient power; Wipe the charging contacts with a dry cloth or cotton swab;
3.  The earbud cannot automatically disconnect from the mobile phone; Check whether the charging case has sufficient power. The earbud will not power off if the case is out of power and will not disconnect from the mobile phone.

Package List

Earbuds, charging case, charging cable, user manual. Basic Parameters(earbuds) Operation range: 10m (open space with no Battery capacity: 43mAh(single earbud) Charging time: approx. 1.5hr Talk time: approx. 4.5hr Standby time: approx. 60hr Input parameter: 5V 43mA Battery type: li-ion Bluetooth version: V5.2 Basic Parameters(charging case) Input parameter: 5V 190mA Output parameter: 5V 86mA Charging time: approx. 2hr Battery capacity: 310mAh Battery type: li-ion

Caveats

Warning

1.  Do not disassemble, repair or modify the product for any reason, as this may cause fire or even completely destroy the product.
2. Do not expose the product to environments where the temperature is too low or too high (below 0°C or above 45°C).
3. Keep the indicators away from the eyes of children and animals while using the earphones.
4.  Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.
5.  Do not wipe and clean the earphones or their case with alcohol or other volatile liquids.
6.  Avoid any contact with liquids.

Note

1.  Please read this user manual carefully before using the product and please properly store it.
2.  When using for the first time, please fully charge this product.
3.  Please charge the product, in case it has not been used over two weeks.
4.  Please use certificated charger.
5.  Do not wear earphones for a long term to protect your hearing.
6.  Do not wear earphones in any situations with potential risks as wearing them may reduce your perception to the outside world.

FCC Requirement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference;
2.  This device must accept any interference received, including interference that may cause undesired operation..

Daily maintenance
Please do not shower with earbuds. Do not wear them in rainy day. Do not leave them in washing machine or other extreme situations. Clean them with dry cloth.

Warranty Card

Warranty Period 12 months after you purchase this item. ( or you may inquire your local shopper for more details.) Free Service Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service.

Free exchange service will not be accessed under following circumstances:

1.  Damages caused by unauthorized disassembly.
2.  Defects or physical damages caused by leaking or dropping off.
3.  Damages caused by act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.

Manufacturer: Dongguan Liesheng Electronic Co., Ltd. Address: Room 401-410, Building 1, No.  86 Hongtu Road, Nancheng District, Dongguan City, Guangdong, China

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.

References

• Power in self – Haylou

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>