PoP Pay PayPad Plus Dual-screen All-in-one Device User Manual

PayPad Plus
Hardware Manual

Notation Conventions
For the symbols that appear in the document, the description is as follows.

Notice/Warning| Illustrative text that indicates the supplement and explanation of the main text. Warning text indicates potential risks. If not avoided, it may cause injury accidents, equipment damage, or business interruption.
---|---

Please Note

1. The purpose of this section is to ensure that users can use the product correctly through this manual to avoid potential danger or property losses in the operation. Before using this product, please read the product manual carefully and keep it for future reference.

2. Without written permission, any organization or individual cannot extract, copy, translate, or modify the whole or part of this manual in any way. Except for other agreements, our company does not provide any express or implied warranty or statement regarding this manual.

3. This manual is used as a guide. The photos, graphs, charts, and illustrations provided in the manual are only used for explanation and description.

4. There may be differences with the specific products. Please refer to the actual product.
   Our company may update this manual due to product version upgrades or other needs.
   If you need the latest version of the manual, please log in to our official website for reference.

5. It is recommended that you use this manual under the guidance of professionals.

Packing List

AC Power Adapter

Function Definition

|
---|---

Power button

| Power-off state: short press to power on
---|---
Power-on state: long press for 6 seconds to force shutdown
Power-on state: long press for 3 seconds, the screen pops up, select shutdown or restart
Volume button +| Short press to increase the sound
Volume button –| Short press to turn down the sound
Power button plus volume button +| Power-off state: press and hold the volume button + and press the power button at the same time for 3 seconds to force a factory reset
Status LED| Light Status| Description
---|---|---
Indicator light off| Device shutdown
Solid red light| Device abnormal/not connected
Flashing red light| Firmware upgrading
Solid yellow light| Device boot
Flashing yellow light| Weak 4G network signal
Solid blue light| Equipment operating normally
Flashing blue light| Payment successful

Specifications

Secondary screen: 5 inch HD IPS LCD Resolution: 12801080
Storage| RAM 2GB & ROM 16GB
Touch Screen| Multi-touch capacitive screen
WI-FI| 2.4G/5G Dual-frequency supporting 802.11a/b/g/n/ac
Bluetooth| Bluetooth 4.2
Camera| Binocular camera
Speaker| Mono 1.5W
Power input| AC 12V / 3A
USB Interface| USB 2.0 Type-A 3 support only Master
Operational Environment| 0 ~ 40 degrees Celsius
Storage Environment| -30 ~ 60 degrees Celsius

Environmental Protection

This form is compiled in accordance with the regulations of SJ/T11264.
〇: Indicates that the content of the hazardous substance in all homogeneous materials of the part is within the limit requirements specified in GB/T26572
X: Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceed the limit requirement of GB/T26572, but the content of the parts marked with “×” in the above table exceeds the content because the industry has not yet matured alternatives technology
Products that have reached or exceeded the environmental protection service life should be recycled in accordance with the “Administrative Measures for the Control of  Electronic Information Products” and should not be discarded at will.

Declaration of Responsibility

• To the maximum extent permitted by law, the products (including their hardware, software, firmware, etc.) described in this manual are provided as what it is. It is possible to have flaws, errors,s or malfunctions. Our company does not provide any express or implied warranty, including but not limited to merchantability, quality satisfaction, suitability for specific purposes, non-infringement of third-party rights, etc.; Nor will we make compensation for any special, incidental, or indirect damages caused by using the manual or products, including but not limited to loss of business profits, data or documents.
• When installing the product, the customer should take measures against risks such as theft, destruction, and unauthorized access, such as using the product in a place where the manager and employees can see it. We are not responsible for any problems such as physical damage or information leakage.
• If you connect the product to the network, you should take risks on your own, including but not limited to network attacks, hacker attacks, virus infections, etc. Our company will not be responsible for abnormal problems such as information leakage caused by this, but we will provide you with product-related technical support in a timely manner.
• When using this product, please strictly follow the applicable laws. If the product is used to infringe the rights of third parties or for other improper purposes, our company will not bear any responsibility. In case of any conflict between the applicable law and this manual, the law shall prevail.

FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure limits set forth in an uncontrolled environment. This device should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>