CEMC GS4227E GigaSpire Router User Guide
- June 6, 2024
- CEMC
Table of Contents
CEMC GS4227E GigaSpire Router
Quick Start Guide
Setting up your GigaSpire
- Connect GigaSpire to a power outlet.
- Connect one end of the supplied Ethernet cable to one of the LAN ports found on the back of the Internet access device provided by your service provider (e.g., modem or ONT) and the other end of the cable to the WAN port on the back of the GigaSpire.
- The solid green light indicates SUCCESS! You are connected to the Internet.
- Refer to the Quick Start Guide for the App to set up your Wi-Fi.
Need help?
Contact Technical Support: 1-800-987-2362 or support@cumberlandconnect.org
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>