IKEA BADRING Water Leakage Sensor Instructions

IKEA BADRING Water Leakage Sensor

Get started

BADRING water sensor detects the presence of water in indoor environments and sounds an alarm. It can be used with the DIRIGERA hub and IKEA Home smart app to notify you of a water leak, even if you are away from home.

Get started with DIRIGERA hub

1. Open the back of the sensor and insert an AAA/HR03 battery.
2. Download the IKEA Home smart app and follow the instructions on your screen.
3. Close the battery compartment and place the sensor wherever you want to monitor the presence of water.

Get started without DIRIGERA hub

1. Open the back of the sensor and insert an AAA/HR03 battery.
2. Close the battery compartment and place the sensor wherever you want to monitor the presence of water.
3. The sensor is ready to use straight away.

IKEA Home smart app
For Apple devices, download the app using the App Store. For Android devices, download the app using Google Play store.

Get to know your product
You can use the sensor in damp locations, like bathrooms, laundry rooms or basements. The sensor has two metal prongs underneath and will sound an alarm when both prongs come into contact with water.  The sensor has silicon feet to prevent it from moving around so there is no need to use double-sided tape or any other adhesive that may obstruct the flow of water.

Testing the alarm
We recommend testing the alarm to familiarize yourself with the way it sounds. Place the sensor in a bowl of water to test the alarm. The alarm will stop when the prongs underneath the sensor dry out.

Adding more sensors
You can connect as many sensors as you like to the DIRIGERA hub and IKEA Home smart app. To add a new sensor follow the instructions in the IKEA Home smart app.

Battery care
When it’s time to replace the battery, a red LED indicator will light up three times on the sensor and in the IKEA Home smart app you will be notified when the battery is low.

Changing the battery
Open the back of the sensor, insert a new AAA/HR03 battery and close it again. Please note the safety information in this document concerning battery usage and disposal. We recommend using 1 x IKEA LADDA 750 (AAA/HR03, 1.2V, 750mAh, Ni-MH). Sold separately.

Factory reset
Press the pairing button 4 times within 5 seconds.

Care instructions

To clean the product, wipe with a soft cloth moistened with a little mild detergent. Use another soft dry cloth to wipe it dry. Never use abrasive cleaners or chemical solvents since this can damage the product.

Safety instructions

Please read this section carefully before using the product. It contains important information and should be saved for future reference.

General safety

• This product is for indoor use only and can be used in temperatures ranging from 0℃ to 40℃ (32°F to 104°F).
• Do not leave the product in direct sunlight or near a heat source as it may overheat.
• Different building materials and product location can affect wireless connectivity range.

WARNING!
Risk of explosion if the battery is replaced by an incorrect battery type. Dispose of used batteries according to the instructions.

Technical data

• Model: BADRING water leakage sensor
• Type: E2202
• Input: 1.2V, 1 x AAA/HR03 LADDA battery
• Range: 10 m in open air.

For indoor use only

• Operating frequency: 2405-2480 MHz
• Output power: 7.3 dBm (EIRP)
• IP-class: IP44

Keep this manual for future use.

• Manufacturer: IKEA of Sweden AB
• Address: Box 702, SE-343 81 Älmhult, SWEDEN

This device complies with Part 15 of the FCC Rules/Innovation Science and Economic Development Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation of the device.

WARNING:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC STATEMENT

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling per local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

MX
Importador/Distribuidor: IKEA Supply Mexico, S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México. Tel. 55-8310-8310.© Inter IKEA Systems B.V. 2023 AA-2431359-2

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>