EXTECH ET15 Three Wire Receptacle Tester User Manual
- June 6, 2024
- EXTECH
Table of Contents
USER MANUAL
Model ET15 – Receptacle Tester
- Tests for faulty wiring in 3-wire receptacles
- Tests Reversed/ Open Connections
- Detects 5 separate faults
Operating Instructions
- Always test on a known good circuit before use
- Refer all indicated problems to a qualified electrician
- Interpret the LEDs as follows:
- The tester will not indicate the quality of the ground connection, 2 hot wires in a circuit, a combination of defects, or reversal of ground and neutral conductors.
Two-year Warranty
Teledyne FLIR LLC warrants this Extech brand instrument to be free of defects in parts and workmanship for two years from the date of shipment (a six-month limited warranty applies to sensors and cables). To view the full warranty text please visit http://www.extech.com/support/warranties.
Calibration and Repair Services
Teledyne FLIR LLC offers calibration and repair services for the Extech brand products we sell. We offer NIST traceable calibration for most of our products. Contact us for information on calibration and repair availability, refer to the contact information below. Annual calibrations should be performed to verify meter performance and accuracy. Product specifications are subject to change without notice. Please visit our website for the most up-to-date product information: www.extech.com.
Contact Customer Support
Customer Support Telephone List: https://support.flir.com/contact
Calibration, Repair, and Returns:
repair@extech.com
Technical Support: https://support.flir.com
Copyright © 2021 Teledyne FLIR LLC
All rights reserved including the right of reproduction in whole or in part in
any form
www.extech.com
References
- 📧repair@extech.com
- Extech is now on FLIR.com | Teledyne FLIR
- Extech is now on FLIR.com | Teledyne FLIR
- support.flir.com
- support.flir.com/
- support.flir.com/contact
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>