ZKTECO AQD-H35 Air Quality Detector User Manual
- June 6, 2024
- ZKTECO
Table of Contents
User Manual
Air Quality Detector AQD-H35
Version: 1.0
Product Specifications
Display method: Common Screen display
Atmospheric pressure: 86Kpa to 106Kpa
Detection method for CO2: Infrared (NDIR)
Detection method for PM: Laser scattering
Sampling time: 1.5 seconds
Product Size: 909050mm
Concentration unit for CO2: PPM
Concentration unit for PM: ug/m3
Power source: Lithium battery with 2000 mAh capacity; 5V DC power charging via
micro USB port
Product weight: 200g
Product Description
This product is an air quality monitor that detects Carbon dioxide (CO2) in real-time monitoring.
Considerations
Please read the instructions carefully before using this device.
Please let the device work short mins outdoors before use for the most
accurate results.
Please keep the manual handy for quick reference and troubleshooting.
Precautions
Avoid covering the air intake areas during use to avoid inaccurate
measurements.
Avoid the use of solvents to clean the product as residual fumes will skew air
quality readings.
Avoid water or other liquids near the product to avoid electrical damage.
Do not allow unauthorized Modi cation or repair of this product.
Features:
- Common Screen display
- Test variables: Carbon dioxide (CO2)
- Large 2000mAh capacity Lithium battery
- 5V Micro USB charging
- Low battery warning
Instructions
- Start-Up
When you long press the power button, the air quality monitor will boot up.
It would auto ash every 5 seconds switching data from PM1.0, PM2.5, PM10.
Product Key Function Description
-
Display screen
-
Power button
1. Long press for 3 seconds to turn device on/o ;
2. Single click to switch Celsius and Fahrenheit;
3. Double click to turn on/o Alarm function(when turning on the alarm function, it would beep sound once CO2 value more than 1000PPM) -
Airhole of the back
-
The battery cover of the back
-
Foot pads
-
Side air ow holes
-
USB charging port
2. About Charging
When a low battery icon is displayed, the device needs to be charged. Insert
the included or another compatible micro USB charging cable into the device.
Attach the other end to a USB DC charger (such as a smartphone charger) that
outputs DC 5V at >=1000mA. Fully charge for at least 2-3 hours before use.
Avoid charging with a USB computer port that only outputs 500mA.
3. Parameters
CO2 technical indicators
Measuring range: 400 to 5000PPM
Sensor for CO2: Infrared ( NDIR)
Resolution: 1 PPM
Product List
Air Quality monitor x 1
Micro USB charging cable x 1
Product Manual x 1
Ctra. Fuencarral 44. Edificio 1, Planta 2.
28108 Alcobendas, Madrid. Spain
Phone: +34 916 532 891
Mail: sales@zkteco.eu
www.zkteco.eu
Copyright © 2021 ZKTECO CO., LTD. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>