ShuGuoTu MU21008 Slim Wireless Mouse ASST2 Instruction Manual

June 6, 2024
ShuGuoTu

ShuGuoTu MU21008 Slim Wireless Mouse ASST2

ShuGuoTu-MU21008-Slim-Wireless-Mouse-ASST2-product
Contents Included:

  • 1 pc Wirele&s MoU&e
  •  1 pc USB Receiver (Stored in the battery compartment)
  • Raqul1’8S Two (2} 1.5AAAAAlkallne Batteries(Nol Included)
    ShuGu-Tu-MU21008-Slim-Wireless-Mouse-ASST2-fig1

How To Operate

  • Open Iha Battery Covar @ on the battery comparlment, lnsert2pcs “AAA” batteries (not lndudad, needto purchase additionally), and remind to check for the correct polarity(+/-}.

  • Take out the USB receiver and secure the Battery Cover @ to the battery compartment.

  • Turm on your computer and connect Iha USB receiverto the USB port of your computer, wait a minute untilthe device has been automatically detected andinstalled (Plug and Play}. When installation is completed, you can use the device.

ShuGu-Tu-MU21008-Slim-Wireless-Mouse-ASST2-fig4

  • The DPI switch button allows you to switch betweenthe different DPl-modes (1 OO0DPI, 1200DPI and 1600DPI).

NOTE : To avoid any loss of this receiver during transport, we suggest to insert the receiver into the battery compartment on the bottom of this device when it isn’t in use.

Product Specification

  • Key number: 4D
  •  Receiver: USB2.0
  •  DPI: 800-1200-1600
  •  Operating temperature: -5″C- 40″C
  •  Relative humidity: 20% – 90%
  • Maximum speed: 28in/sec
  •  response rate: 125Hz
  •  Operated by 2pcs AAA batteries
    • (not included, need to purchase additionally}
  •  Working current <10mA
  •  Product Size: 4.45″x2.2*x 1″
  • Compatible system:
    • WinXP/Win7Nlin8/Win10/Macos

Problem Reference

Mousa doen not respond Is the mouse SENSOR light on?
(No light, check if the battery has elecbicity, and whether the positive and negative poles are breversed.
Did the receiver recogniu success?
(Identification failed, change a USB interface, Or reload the drive.)
Overcoming

  • Is the mouse and desktop emooth?
    • (If not ple8$6 put it in smooth surface.)
  •  Is the battery low?
    • (tithe battery is low, please replace the battery.)

WARNING: TO AVOID BATTERY LEAKAGE

  • The batteries used with this product are small parts and should be kept away from small children who still put things in their mouths. If they are swallowed, promptly see a doctor and have the doctor phone American Association of Poison Control Centers (1-800-222-1222).
  • Always purchase the correct size and grade of battery most suitable for intended use.
  • Do not mix old and new batteries, alkaline, standard (Carbon – Zinc) or rechargeable (Nickel-<:admium) batteries.
  •  Clean the battery contacts and those of the device prior to battery installation.
  • Ensure the batteries are installed correctly with the regard lo polarity{+/-).
  • Always remove batteries if consumed or if product is to be left unused for a long time.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

  •  this device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired noperation.

“WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.”

NOTE
This equipment has been tested and found to comply with the limits for a Cla$S B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses end can radiate radio frequency energy end, if not installed end used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that lo which the receiver is connected. Consult the dealer or an experiencd radiofTV technician for help.”

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals