Shelly EM+50A Clamp Instruction Manual

Shelly EM+50A Clamp

INITIAL INCLUSION

Before installing/mounting the Device ensure that the grid is powered off (turned down breakers). Connect the Relay to the power grid and install it in the console behind the switch/power socket following the scheme that suites the desired purpose. For more information about the Bridge, please visit: http://shelly-api-docs.shelly.cloud/#shelly-family-overview or contact us at: developers@shelly.cloud You may choose if you want to use Shelly with the Shelly Cloud mobile application and Shelly Cloud service. You can also familiarize yourself with the instructions for Manage- ment and Control through the embedded Web interface.

CONTROL YOUR HOME WITH YOUR VOICE
All Shelly devices are compatible with Amazon Echo and Google Home. Please see our step-by-step guide on: https://shelly.cloud/compatibility/

SHELLY APPLICATION

Shelly Cloud gives you opportunity to control and adjust all Shelly® Devices from anywhere in the world. You only need an internet connection and our mobile application, installed on your smartphone or tablet.

• Registration
  The first time you load the Shelly Cloud mobile app, you have to create an account which can manage all your Shelly® devices.

• Forgotten Password
  In case you forget or lose your password, just enter the e-mail address you have used in your registration. You will then re-ceive instructions to change your password.
  WARNING! Be careful when you type your e-mail address during the registration, as it will be used in case you forget your password.

• First steps
  After registering, create your first room (or rooms), where you are going to add and use your Shelly devices.
  Shelly Cloud gives you opportunity to create scenes for auto-matic turning on or off of the Devices at predefined hours or based on other parameters like temperature, humidity, light etc. (with available sensor in Shelly Cloud).
  Shelly Cloud allows easy control and monitoring using a mo-bile phone, tablet or PC.

Device Inclusion

To add a new Shelly device, install it to the power grid following the Installation Instructions included with the Device.

• Step 1
  After the installation of Shelly following the Installation Instructions and the power is turned on, Shelly will create its own WiFi Access Point (AP).
  WARNING! In case the Device has not created its’ own AP WiFi network with SSID like shelly1-35FA58, please check if the Device is connected accordingly to the Instalation Instruc-tions. If you still do not see an active WiFi network with SSID like shelly1-35FA58, or you want to add the Device to another Wi-Fi network, reset the Device. If the Device has been pow-ered on, you have to restart by powering it off and on again. After turning the power on, you have one minute to press 5 consecutive times the button/switch connected SW. You have to hear the Relay trigger itself. After the trigger sound, Shelly should return to AP Mode. If not, please repeat or contact our customer support at: support@Shelly.cloud

• Step 2
  Choose “Add Device”. In order to add more Devices later, use the app menu at the top right corner of the main screen and click “Add Device”. Type the name (SSID) and password for the WiFi network, to which you want to add the Device.

• Step 3
  If using iOS: you will see the following screen: Press the home button of your iPhone/iPad/iPod. Open Settings > WiFi and connect to the WiFi network created by Shelly, e.g. shelly1-35FA58. If using Android your phone/tab-let will automatically scan and include all new Shelly Devices in the WiFi network that you are connected to. Upon successful Device Inclusion to the WiFi network you will see the following pop-up:

• Step 4
  Approximately 30 seconds after discovery of any new Devic-es оn the local WiFi network, а list will be displayed by default in the “Discovered Devices” room.

• Step 5
  Enter Discovered Devices and choose the Device you want to include in your account.

• Step 6
  Enter a name for the Device (in the Device Name field). Choose a Room, in which the Device has to be positioned. You can choose an icon or add a picture to make it easier to recognize. Press “Save Device”.

• Step 7
  To enable connection to the Shelly Cloud service for remote control and monitoring of the Device, press “YES” on the fol-lowing pop-up.

Shelly devices settings

After your Shelly device is included in the application, you can control it, change its settings and automate the way it works. To switch the Device on and off, use the respective ON/OFF button. To enter at the details menu of the respective Device, simply click on it’s name. From the details menu you may con-trol the Device, as well as edit its appearance and settings.

• Edit device – allows you to change the Device’s name, room and picture.
• Device settings – allows you to change settings. For ex-ample, with Restrict login you may enter a username and password to restrict access to the embedded web interface in Shelly. You may automate the Device operations from this menu as well.
• Timer – to manage the power supply automatically, you may use:
  • Auto OFF: After turning on, the power supply will automat-ically shutdown after a predefined time (in seconds). A value of 0 will cancel the automatic shutdown.
  • Auto ON: After turning off, the power supply will be auto-matically turned on after a predefined time (in seconds). A value of 0 will cancel the automatic power-on.
• Weekly schedule – this function requires an Internet connec-tion. To use Internet, a Shelly Device has to be connected to a local WiFi network with working internet connection. Shelly may turn on/off automatically at a predefined time and day throughout the week. You may add unlimited number of weekly schedules.
• Sunrise/Sunset – this function requires an Internet connec-tion. To use Internet, a Shelly Device has to be connected to a local WiFi network with а working Internet connection. Shelly receives actual information through the Internet about the time of sunrise and sunset in your area. Shelly may turn on or off automatically at sunrise/sunset, or at a specified time before or after sunrise/sunset.
• Power on default mode – this setting controls whether the De-vice will supply power or not the output as a default whenever it is receiving power from the grid:
  • ON: When the Device is powered, by default the socket will be powered.
  • OFF: Even if the Device is powered, by default the socket will not be powered.
• Restore last mode – when power is restored, by default, the appliance will return to the last state it was in before the last power off/shutdown.
• Momentary button type – set Shelly input to be buttons. Push for ON, push again for OFF.
• Toggle switch button type – set Shelly input to be flip switch-es, with one state for ON and another state for OFF.
• Firmware update – shows present firmware version. If a new-er version is available, you can update your Shelly Device by clicking Update.
• Factory reset – remove Shelly from your account and return it to its factory settings.
• Device information – here you can see the unique ID of Shelly and the IP it got from the Wi-Fi network.

THE EMBEDDED WEB INTERFACE

Shelly can be set and controlled through a browser.

• Abbreviations used
  Shelly ID – the unique name of the Device. It consists of 6 or more characters. It may include numbers and letters, for example 35FA58.
  SSID – the name of the WiFi network, created by the Device, for example shelly1-35FA58.
  Access Point (AP) – the mode in which the Device creates its own WiFi connection point with the respective name (SSID). Client Mode (CM) – the mode in which the Device is connect-ed to another WiFi network.

• Initial inclusion
  Step 1
  Install Shelly to the power grid following the schemes de-scribed above and place it into the console. After turning the power on Shelly will create its own WiFi network (AP).
  WARNING! If you don’t see the WiFi please fallow the step 1 from the device inclusion section of the guide.
  Step 2
  When Shelly has created an own WiFi network (own AP), with name (SSID) such as shelly1-35FA58. Connect to it with your phone, tablet or PC.
  Step 3
  Type 192.168.33.1 into the address field of your browser to load the web interface of Shelly.

• General – Home Page
  This is the home page of the embedded web interface. If it has been set up is correctly, you will see information about Settings menu button, Current state and Present time. Settings – general settings. In this menu, you can configure the Shelly device’s work and connection modes.

• WiFi settings – the WiFi connection settings.

• Access Point (AP) mode – allows the Device to operate as a WiFi access point. The User can change the name (SSID) and the password to access the AP. After you have entered the desired settings, press Connect.

• WiFi client mode (CM) – allows the Device to connect to an available WiFi network. In order to switch to this mode, the User must enter the name (SSID) and the password to con-nect to a local WiFi network. After entering the correct details, press Connect.

• ATTENTION! If you have entered incorrect information (wrong settings, usernames, passwords etc.), you will not be able to connect to Shelly and you have to reset the Device. Login – access to the Device
  Leave unprotected – removing the notification for disabled authorization.

• Enable authentication – you can turn authentication on or off. This is where you can change your username and pass-word. You must enter a new username and the new pass-word, then press Save to save the changes.
  Connect to cloud – you can turn the connection between Shelly and Shelly Cloud on or off.

• Firmware upgrade – Shows present firmware version. If a newer version is available, you can update your Shelly Device.

• Device reboot – Reboots the device.

MANAGING IN RELAY MODE

• Relay Screen
  In this screen you can control, monitor and change the set-tings for turning the power on and off. You can also see the current status of the connected appliance to Shelly, Buttons Settings, On and OFF. To control Shelly press Relay:

  • To turn on the connected circuit press Turn ON
  • To turn off the connected circuit press Turn OFF Press the icon to go to the previous menu.

• Shelly management settings
  The same as in inclusion section of the guide.

References

• Welcome to Shelly Technical Documentation | Shelly Technical Documentation
• Compatibility - Shelly Cloud

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>