ZKTeco AQD-L100 Multifunctional Air Quality Detector User Manual

: June 6, 2024
: ZKTECO

Table of Contents

ZKTeco AQD-L100 Multifunctional Air Quality Detector User Manual
Product Specications
Product Description
Considerations
Precautions
Features
Instructions
- 1. Start Up
Product Key Function Description
2. About Charging
3. Parameters
Product List
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZKTeco AQD-L100 Multifunctional Air Quality Detector User Manual

Product Specications

Product Description Display method: Common Screen display Atmospheric pressure: 86Kpa to 106Kpa Detection method for CO2: Infrared (NDIR) Sampling time: 1.5 seconds Product Size: 1908052mm Detection temperature: -10°C to 50°C Relative humidity: 20% to 85% Storage temperature: -10°C to 60°C Concentration unit for CO2: PPM Power source: Lithium battery with 3000 mAh capacity; 5V DC power charging via micro USB port.

Product Description

This product is an air quality monitor that detects Carbon dioxide (CO2), Temperature, and Humidity. it combines sensors real-time monitoring of Carbon dioxide (CO2), temperature, and humidity on its displa.

Considerations

Please read the instructions carefully before using this device.
Please let the device work short mins outdoors before use for most accurate results.
Please keep the manual handy for quick reference and troubleshooting..

Precautions

Avoid covering the air intake areas during use to avoid inaccurate measurements. Avoid use of solvents to clean the product as residual fumes will skew air quality readings.
Avoid water or other liquids near the product to avoid electrical damage.
Do not allow unauthorized modication or repair of this product.

Features

Common Screen display
Test variables: Carbon dioxide (CO2), temperature, humidity
Large 3000mAh capacity Lithium battery
5V Micro USB charging
Low battery warning

Instructions

1. Start Up

When you long-press the power button, the air quality monitor will boot up.

Product Key Function Description

Power button, long press to turn on/o, 2 times-click to enter time setting.
Right button, Single click to switch Celsius and Fahrenheit.
Left button, long-press to turn on/o Alarm soud. (when turn on alarm function, it would beep sound once CO2 value more than 1000PPM)
USB charging port. Time setting In the power-on state, short press 2 times power button to enter the Date and time mode.

click the left or right buttons to adjust the Years; then click the power button to switch to Months, click the left or right buttons to adjust the Months; then click the power button to switch to days,
click the left or right buttons to adjust the days; then click the power button to switch to Hours, click the left or right buttons to adjust the hours; then click the power button to switch to minutes, click the left or right buttons to adjust the minutes; then click the power button to switch to seconds, click the left or right buttons to adjust the seconds. After adjustment well, click the power button to conrm and complete the time setting.

2. About Charging

When low battery icon is displayed, the device needs to be charged. Insert the included or another compatible micro USB charging cable into the device. Attach the other end to a USB DC charger (such as a smart phone charger) that outputs DC 5V at >=1000mA. Fully charge or at least 2-3 hours before use. Avoid charging with a USB computer port which only outputs 500mA.

3. Parameters

CO2 technical indicators
Measuring range: 400 to 5000PPM
Sensor for CO2: Infrared (NDIR)
Resolution: 1 PPM
Temperature and humidity technical indicators

Measuring range: -10 to 50°C
Measurement accuracy: ±1°C
Humidity range: 20% to 85% RH
Measurement accuracy: ±4% RH