microlife MT 1622 GoldTemp Digital Medical Thermometer Instruction Manual

Microlife MT 1622 GoldTemp Digital Medical Thermometer

IMPORTANT SAFETY INSTRUCTIONS

• Digital medical thermometer MT 1622 is intended to use for oral, axillary, or rectal measuring of human temperature. Field of application: in medical institutions and at home for individual use. A display of values with an accuracy of 0.01 C. It can be recommended for family planning.
• The instrument may be used only for measuring body temperature!
• The minimum measurement time until the signaling tone [beep] must be maintained without exception!
• The thermometer contains small parts (battery, etc.) that can be swallowed by children. Therefore never leave the thermometer unattended to children.
• Protect the thermometer from hitting and striking!
• Avoid ambient temperatures above 60 °C. NEVER boil the thermometer!
• Use only the commercial disinfectants listed in the section «cleaning and disinfecting» to clean the thermometer. The thermometer must be intact when immersed in liquid disinfectant.
• The manufacturer recommends verifying the accuracy by an authorized laboratory every 2 years.

Batteries and electronic instruments must be disposed of in accordance with the locally applicable regulations, not with domestic waste.

TURNING ON THE THERMOMETER

To turn on the thermometer, push the button over the display window; a short signaling tone [beep] signals «thermometer ON». A display test is performed. All segments should be displayed. Then at an ambient temperature of less than 32 °C, an «L» and a flashing «°C» appear at the upper right of the display. The thermometer is now ready for use.

USING THE THERMOMETER

• Choose the preferred measuring method. During a measurement, the current temperature is displayed continuously. The «°C» symbol flashes during this period of time. If the signaling tone sounds (beep-beep-beep 10 times) and the «°C» is no longer flashing, this means that the measured increase in temperature is now less than 0.01 °C in 8 seconds and that the thermometer is ready for reading.
• To prolong the life of the battery, turn it off after use by pressing the operating button briefly. Otherwise, the thermometer will automatically turn off after about 10 minutes.

STORAGE OF MEASURED VALUES

If you hold the button down for more than 3 seconds when turning the thermometer on, the maximum temperature stored automatically at the last measurement will be displayed. At the same time, a small «M» for memory will appear at the right of the display. After 3 more seconds, this value will disappear and the thermometer will switch to the normal measurement mode. Then the stored value is erased.

BATTERY REPLACEMENT

When the «▼»-symbol appears, the battery is exhausted and needs replacing. Please remove the compartment lid of the thermometers and replace the exhausted battery by positioning the + at the top.

GUARANTEE

We grant you a 5-year guarantee after the date of purchase. Any damage caused by improper handling shall not be covered by the warranty. Battery and packaging are also excluded from the warranty. All other damage claims are excluded. A warranty claim must be submitted with the purchase receipt.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>