netthandelen MS68 Sweeper Owner’s Manual
- June 6, 2024
- netthandelen
Table of Contents
netthandelen MS68 Sweeper
important
carefully before use. store for future consultation
Warning! safety rules must be observed at the time of use. for your own
safety and the safety of the people, please read these instructions before
using the product, please keep these instructions for future reference.
Training
please read carefully the way of use .you need know with orders and the correct use of the device. don’t let the camera to a person who has not read the book or for children. local regulations may establish a minimum age for use of this device. keep in mind that the operator or user, or the user is responsible for accidents and damages caused to other persons or their property.
Preparation
we recommend that you wear sturdy shoes and long pants to use this device. do not operate the device barefoot or wear open toed shoes. inspect the area where the broom is to be used, and remove any objects that could cause damage to the device. always check visually prior to use, the accessories are not worn or damaged.replace accessories worn or damaged bolts by full packages in order to preserve the balance do not use the appliance so that people (including children) or pets are in close proximity. the device can be used on flat surfaces and farms. always wear a dust mask and footwear during use of the device.
Operation
get the device operational only in the light of day or a good artificial lighting. do not use the appliance accessories damaged. always make sure your balance on the slopes. we recommend the use of the aircraft on the ground or smooth surfaces 15 degrees of slope. walk, don’t rush. hold the camera with both hands on the handle when you pull or push. this ensures a safe handling. clean up the slopes at right angles, not up and down. be extremely careful when changing direction on the slope. be very careful when you go back and get the machine to you. do not use on steep slopes specific risks may arise when working in soil tough.device can speed up suddenly or blocked completely. before using the device, and after shock, look for signs of wear or damage and repair if necessary. keep hands and feet away from the rotating accessories anytime. don’t put your hands or feet near the rotary parts. watch out for injuries to the foot and hands due to the accessories.
maintenance and storage
follow the instructions for maintenance and repair of the device. do not
change the product. the information on the interview and repairs are included
in the manual. maintain all nuts, bolts and screws tight, to be sure the
product is in good working condition. replace the worn out or damaged parts of
the safety .use as accessories and spare parts, as recommended by the
manufacturer. inspect and maintain the product on a regular basis. get the
device only by a qualified professional or a professional service center when
it is not in use, keep the device out of the reach of children. The residual
risk
even if you are using the device in accordance with the standards of safety,
risk of bodily injury and property damage still exist. the method of
construction and operation of the tool, you can be at risk:
damage to property and persons caused by sudden impact, broken or the
accessories of the machine with hidden objects during use. damage to property
and persons from the projection of objects.
Symbols
in the apparatus, on the data plate and on the instructions for use, you will find, among others, the following abbreviations and symbols you should familiarize yourself with their meanings in order to reduce the risk of personal injury and damage to property.
General
- Width of operation: 680 mm
- Recommended speed: 4 km/h (1,1 m/s)
- Ability to scan (4 km / h): 2800 m²/h
- The volume of dust collector: 12l
- Roller brush: Ø 108 mm x 380 mm
- Brush for cleaning: Ø 230 mm
- Weight: 11 kg
- Dimension (L x I x H): 575 x 215 x 585 mm
Unpacking
take out the parts of the package and put it on a flat surface. remove all packaging materials and accessories supply, as the case may be. the product is complete, and in good condition.if a piece is missing or damaged. do not use the device and contact the store product use incomplete or purchase.the damage may represent a danger to both goods and individuals. check that you possess all the necessary accessories for the assembly and use of the device. this is also the appropriate personal protective equipment. accessories required (not available) personal protective equipment appropriatethe appropriate head screwdriver
Brush for cleaning
put the camera in the disc to access to training (7b). line up the holes and move the cleaning brush disc [7] on [b] training. fix it with screws (7) with the phillips head screwdriver (fig. 1, right). go back to the camera.
Bottom bar of the handle
hook holes on the ends of the bottom bar of the handle axle [2] [8] (figure 2,
step 1). make sure that the bottom of the handle bar is correctly based on the
materials (9) and can be moved in forward and rearward directions freely.
attach the caps (8b) to the axle (8) and push them to the end (figure 2, step
2).
above the handle bar line up the holes and fix the top bar of the handle [1] on the bottom bar of the handle (2) (fig. 3, step 1). secure connection with bolts (1b), (1c) and washers (1d) button (fig. 3, stage 2 and 3).
the top bar of the handle [1] can be attached in two different heights according to the intended application(Fig. 4).
