hyperoptic PMU68 Battery Back-Up Unit User Guide
- June 6, 2024
- hyperoptic
Table of Contents
hyperoptic PMU68 Battery Back-Up Unit
Your battery backup unit (BBU)
A BBU will provide an alternative supply of power to your router (or, if applicable, your fibre converter) for at least one hour during a power failure, allowing you to make calls to emergency organisations during that period*. Each BBU should only be connected to one device. Please make sure your BBU is fully charged so it’s ready to go should you need to use it.
How to use your BBU
- Turn on your BBU using the switch on the back. The ‘Work’ LED light should turn red to show it’s working and charged. If not, you’ll need to charge the unit using the 12V adaptor first (see ‘How
- If/once the BBU is fully charged, connect one end of the supplied DC cable to the BBU ‘OUT’ socket and the other to the power socket on the back of the Hyperhub router.
- Remember to fully recharge the BBU so it’s ready for when you need it again. You should check it and recharge it every 3-5 months.
How to charge your BBU
- Connect the supplied 12V adaptor the BBU ‘IN’ socket and plug into an available power socket. The ‘Work’ LED light will turn green and the ‘Charge’ LED light will turn blue.
- When the BBU is fully charged, the ‘Charge’ LED light will turn green.
BBU LED statuses
Storage instructions
- Please make sure the BBU is fully recharged before storing away
- Please be sure to recharge your BBU every 3-5 months
- Please store at temperature between 0-45°C
- Please do not leave for longer than 6 months without recharging
Important safety instructions
- The BBU is not waterproof
- Do not expose this product to moisture or rain
- Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool
- Do not attempt to disassemble
- Do not crush, puncture or expose to temperature above 45°C or below 0°C
- Only connect AC adaptors with a power output of 12V 3A max
- The BBU should only be connected to devices specified to operate on a 12V 2.5A power source
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>