Hocom VWT-80P8N02 Thermal Camera User Manual

Hocom VWT-80P8N02 Thermal Camera

Main Feature

• Non-contact automatic body temperature detection, Suitable for Subway, Bus station, Train station, Crowded place.
• ALL In One: 1. Thermal Image 2. AHD 1080P Camera 3.1-CH DVR 4. HDMI Output
• Easy Installation: Non IP system, only need plug power & HDMI cable, Everyone can set up.
• 1080P color image with temperature display and video recording, Easy to find out people in the future.
• Distance: 1.0~1.5M Temperature Measurement distance,±0.3℃ Accuracy.
• Quick response: Temperature measurement time is

Precautions

• Do not install the camera in extreme temperature condition
• Do not install or use the camera in an environment where the humidity is high.
• Do not install the camera beside the light source and electrical appliance.
• Do not touch directly the thermal sensor element. If it is necessary to clean the element, use a soft cloth moistened with alcohol to remove any dust build-up.
• Do not drop the camera and protect it from physical shocks.
• Do not use the camera close to gas or oil leak.
• Do not disassemble the camera. Never keep the camera pointed directly as strong light and strong wind environment.
• Do not expose the camera to rain or spill a beverage on it.

Note:

• Do not place the camera in the sunshine or strong light,or near an electrical machine.
• Please check that the power satisfies the normal specification before connecting the camera

Packing List

Overview

Specifications

Thermal
Infrared Measurement Range| 0~100°C
Infrared Accuracy

(Tamb=20~26°C)

| ±0.3°C(0.6°F) from 35 to 42°C

Others: ±2% of reading, or 2°C(4°F)

Thermal Sensitivity| 0.1°C (0.2°F)
Thermal Image| Heimann thermal sensor 32×32 pixels (Germany)
Response time| 12 frame/sec
Field of View| 33*33 degree
Measure Distance| 1.0 meters
DVR
Input Format| AHD 1080P
DSP| Texas Instruments (USA)
Recording| Motion detection(Standard)/continue
Recording Frame Rate| 5 Frame/sec(Standard)10/15
Output| HDMI 1080P/ CVBS(Option)
SD card| SD card, Max 128G
OSD| Remote control
OSD Language| English/Japanese
Camera
Sensor| 2Mp Sony CMOS
Lens| 6.0mm
Video format| AHD 1080P
General
Power| DC12V. 500mA (Max)
Dimension| 110mm(L)x67mm(W)x51mm(H)
Weight| 250g

Installation

Step1. Fix the measure distance 1.0~1.5M(best draw line to setup).

Step2. Installthethermalcameraat property height place

Step 3. Plug DC12V and HDMI cable to monitor

Step4. Adjust camera angle to the facet measure

135~185cm)

Step 5. After power on 5 min, the camera will auto
calibration and then to start measurement.

Step 6. Change to Adjust Fine Tune.

Step 7. People walking at a fix distance Camera auto measure body temperature

Step 8. The camera will beep, Show “PASS” or “NG”, Chang to the next person If human temperature over alarm trigger, the color of temperature on- screen will turn to red,red LED will flash and Buzzer will beep.  If the Ambient temperature changes 2℃, the camera will auto-calibration.

• Press (UP & DOWN) to select.
• Press to decrease and increase
• value, setup finish press return
• You can use to set  me when entering SET DATE/TIME
• Press (UP & DOWN) to select the file.
• Press (ENTER) to play.
• Press to return to the previous menu.

SYSTEM STATUS

Remote Control

Press the button to select the edit detection block function

Please be sure to install the battery before using it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>