AUTOPHIX 3210 Bluetooth OBD2 Scanner Enhanced Universal Car Diagnostic Scanner User Guide
- June 6, 2024
- AUTOPHIX
Table of Contents
3210 Bluetooth OBD2 Scanner Enhanced Universal Car Diagnostic Scanner
User Guide
Special Note
1. Download & install the APP
Method 1: For 10S: Search “OBDMate” in the App Store and install it. For
Android: Search “OBDMate” in Google Play and install it.
Method 2: Scan the QR code to download the “OBDMate” APR
|
---|---
2. Connect the 3210 to the vehicle
Operate with car key
Turn the key to the “ON” position or start the vehicle, then connect the 3210
to the vehicle by plugging it into the OBD2 port.
Operate without car key
Method 1: Press the start button (do not step on the brakes), Then press again
to power up the dashboard, and then plug the 3210 into the OBD2 port.
Method 2: Step on the brakes, press the start button to start the vehicle, and
plug the 3210 into the OBD2 port.
Plug 3210 into the diagnostic link connector(DLC).
The DLC is usually found on the driver’s side, under the dash.
On different vehicles the location of DLC may be different, please refer to
the following possible locations:
3. Connect the 3210 to your device
For iOS, Please open Bluetooth via the Control Center and then open the
“OBDMate” APP to connect the 3210.
Warm reminder: Please DO NOT connect the Autophix 3210 in the phone
system settings. For Android users, please turn on the Bluetooth and connect
the Autophix 3210 in the phone system settings. Then use the “OBDMate” APP to
connect the Autophix 3210.
Warm reminder: Please enter the password “0000” or “1234” if needed.
4. Using Help
If you have any problems during use, please feel free to contact us by
clicking the “?” button or simply email to
support@autophix.com
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party. Responsible for compliance could void the user’s
authority to operate this equipment. (Example- use only shielded interface
cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC radiation exposure limits set forth for
uncontrolled environments. This equipment should be installed and operated
with a minimum distance of 20cm between the radiator and your body.
AUTOPHIX TECH CO., LTD
Floor4, Building2, Jinxicheng Industry Park,
Longhua District, Shenzhen, China
Phone: 0755-8528-1258
E-mail: support@autophix.com
Website: www.autophix.com