Govee B5178001 Smart Indoor/Outdoor Thermo-Hygrometer User Manual
- June 6, 2024
- Govee
Table of Contents
- Safety Instructions
- What You Get
- At a Glance
- Using Your Device
- Pairing Your Device with the Govee Home App
- Pairing the Indoor Device with the Outdoor Sensor
- Specifications
- Troubleshooting
- Customer Service
- Compliance Information
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
User Manual Smart Indoor Outdoor Thermo-Hygrometer
Safety Instructions
- The device should work in an environment with a temperature ranging from -20°C to 60°C and humidity from 0% to 99%.
- Remove the batteries if not using the device for an extended period.
- Prevent dropping devices from the high place.
- Do not disassemble devices violently.
- Do not immerse the device in water.
What You Get
Indoor Thermo-Hygrometer | 1 |
---|---|
Outdoor Remote Sensor | 1 |
AAA Batteries | 5 |
User Manual | 1 |
Service Card | 1 |
At a Glance
Using Your Device
| Backlight:
Press to turn on the backlight for 15s.
---|---
°F/°C| °F/°C Switch:
Press to switch the temperature unit between °F and °C.
CH| Channel:
Press and hold for 3s to get ready for 433 pairings.
MAX
MIN
| Max/Min:
Press to switch between Max/Min and current readings.
Pairing Your Device with the Govee Home App
What You Need:
A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).
- Download the Govee Home app from the App Store (i0S devices) or Google Play (Android devices).
- Turn on the Bluetooth in your smartphone.
- Open the app, tap the “+” icon in the top right corner, and search “B5178”.
- Tap the device icon and follow the on-screen instructions to complete the pairing.
Pairing the Indoor Device with the Outdoor Sensor
Notice:
a. The Indoor Thermo-Hygrometer has paired with the outdoor sensor by default;
b. If you need to repair or pair with a new device, please follow the steps
below.
- Press the button on the indoor device and hold for 3s until outdoor readings on the screen flash, indicating the indoor thermo-hygrometer gets ready for 433 pairings;
- Remove the batteries in the outdoor sensor then re-insert them. The outdoor sensor begins to pair when the indicator light flashes blue;
- The pairing is complete when the outdoor readings update and stop flashing on the screen.
Specifications
Accuracy | . Temperature: ±0.3°C/0.54°F Humidity: ±3% |
---|---|
Working Temperature | -20 to 60°C (-4 to 140°F) |
Working Humidity | 0-99% |
Bluetooth-Enabled Distance | 50m/164ft (No obstruction) |
433MHz-Enabled Distance | _ 60m/197ft (No obstruction) |
- The Indoor Thermo-Hygrometer connects to your smartphone via Bluetooth and connects to the outdoor remote sensor via 433MHz
Troubleshooting
-
Cannot connect to Bluetooth.
a. Make sure Bluetooth in your smartphone has been turned on.b. Connect to the thermo-hygrometer in the Govee Home app instead of the Bluetooth list in your smartphone.
c. Keep the distance between your smartphone and the indoor thermo-hygrometer less than 50m/164ft.
d. Keep your smartphone as close to the Indoor Thermo-Hygrometer as possible
e. Make sure that Android device users turn on Location and iOS users select “Setting – Govee Home – Location -Always” on the phone. -
Data in the app is not updated.
a. Make sure the device has connected to the Govee Home app.
b. Location and iOS users should select “Settings – Govee Home – Location – Always” on the phone. -
Cannot export data in the app. Please sign up or log into your account before exporting data.
-
The indoor device cannot pair with the outdoor sensor.
a. The indoor thermo-hygrometer has been paired with the outdoor sensor by default.
b. Check whether the battery is running low.
c. Place the Indoor Thermo-Hygrometer near the outdoor remote sensor.
Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
@Govee
@Govee
@Govee
@Goveeofficial
Compliance Information
EU Compliance Statement:
Shenzhen Intellirocks Tech Co. Ltd. hereby declares that this device is in
compliance with the essential requirements and other relevant provisions of
the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is
available online at www.govee.com/
EU contact address:
BellaCocool GmbH (E-mail: info@bellacocool.de)
PettenkoferstraRe 18, 10247 Berlin, Germany
Environmentally-friendly disposal
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to
similar collection points.With this little personal effort, you contribute to
recycling valuable raw materials and the treatment of toxic substances.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
https://www.govee.com/apps/qrcode
For FAQs and more information, please visit:
www.govee.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>