BlueShadow Cuka-M1200C AC1200 Dual Band Whole Home Mesh WiFi System Installation Guide

: June 6, 2024
: BlueShadow

Table of Contents

Package Contents
How to set up mesh tutorials
How to setup access from WiFi router
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Network Connect Future
QUICK INSTALLATION GUIDE
AC1200 Dual Band Whole Home Mesh WiFi System

Cuka-M1200C
www.myblueshadow.com
Version 1.0.0

Package Contents

Cuka-M1200C X1
Power Adapter X 1
Ethernet Cable X 1
Quick Installation Guide X 1

How to set up mesh tutorials

Select one of them as main mesh randomly, the remaining two are child mesh, (A1, A2, A3, is just show how to use each mesh, not stipulatetd on the mesh)

Plug in the power and wired cable (The optical modem must be connected to
the WAN/LAN port)| Quickly click the top cover for twice to turn on the LED indicator

---|---
2. Search Cuka-M1200C 2.4G/5.0G from mobile phone

Choose 2.4G or 5.0G to connect

3. Input SSID password: 22109088

4. Open the browser, input URL to connect from mobile phone

5. Network enters the setup installation wizard

2. How to pair the other two child mesh

1 How to pair the other two child mesh

Wait 2-5 minutes, if the light does not turn blue, try a second time

How to setup access from WiFi router

1. Input SSID password: 22109088 mm

Status	Explanation
Solid blue	The system is starting.

The primary node is connected to the internet.
The secondary node is connected to the WiFi network of the primary node well.
Solid red| The primary node is not connected to the internet.
The secondary node is not connected to the WiFi network of the primary node.
The secondary node is connected to the WiFi network of the primary node very poorly.

Pairing Status Red light flashes
Network status Blue light breathing
Disconnection status Red light is on
After setting up the network Turn off the light and there is still a network state

When your network goes through a switch or router
Q: What should I do when the main mesh keep solid red state?

A: Change the IP address, make the penultimate digit greather than 3 (Browser input )
Such as : 192.168.4.1 / 192.168.5.1 / 192.168.6.1 oooooo

Tips
Changed the IP of the main Mesh needs to be powered off and restarted

Shenzhen blue shadow development co.Ltd
www.myblueshadow.com

Copyright & Trademarks

blue shadow is a registered trademark of BIUESHADOW TECHNOLOGY CO., LTD Other brands and product names mentioned herein are trademarks or registered trademarks of their respective holders.
As the technology is constantly updated and improved, contents in this document are subject to change without notice.