HAME P106W10 Polymer Power Bank User Manual
- June 6, 2024
- HAME
Table of Contents
HAME P106W10 Polymer Power Bank
Please read this user manual before using the product, then keep it in good condition.
Accessories
- Host
- User manual
- Cable
Specification
- Model: P106W10
- Type-C Input: 5V /3A， 9V/2A
- USB-A Output: 5V /2.4A， 9V/2A, 12V/1.5A
- Type-C Output: 5V /3A， 9V/2A
- Wireless charger Output: 5W/7.5W/10W
- Output: 18W(Max)
- Dimensions: 138x70x18.7mm
- Dimensions: 138x70x18.7mm
- Weight: 210±10g
- Battery Capacity: 10000mAh/3.7V/37Wh
Overview
- Input: Self-charging
- Output /Wireless charger: For charging digital devices.
- Battery indicators: LED indicators to show battery status
- Battery indicator button: Press to check the battery level
Warranty Card
Thank you very much for using our products. According to the prescription,
anybelongs to under normal usage circumstance cause because of the product
quality’s problem of breakdown,our company will be responsible for giving free
maintain during this period.
Free maintain won’t be given under the following circumstance:
- Without Protection to fix warrantees and the purchasing invoice.
- The protect to fix card or purchasing invoice has been changed.
- The breakdown and damage caused by the Force majeure.
- The breakdown,damaged because of the transportation or handling.
- The breakdown caused by the manipulation that hasn’t follow the requests of the Manual.
- The damage caused by the dismantle movement of non-our- company authorized maintainer.
In protect fix the period,customers can bring the purchasing invoice and the
customer couplet that has filled to the vendor,and please send back to HAME
for repair by the vendor.
Hame Technology Co., Limited
Add: 3/F, Plant #1, Huahan Industrial Park,No.16, Jinniu West Rd.,
Pingshan New District,Shenzhen 518118, China.
Website: www.hametech.com
Certificate Of Approval
Date of Manufacture:
Quality Controller:
Operation introduction
Charging power bank:
See below diagram,the white indicator is flickering when charging.It will stop
flicker and all the indicators turn in white after fully charged.Please remove
the adapter safely after power bank is fully charged.
Charging digital devices:
Once the power bank is connected to the digital device, the device shall be
charged.
Matters needing attention
It is forbidden to put the equipment in high temperature and high humidity environment, lest cause equipment overheating and internal short circuit and damage to equipment. Storage temperature not more than 45 degrees, high- temperature storage for a long time can affect the service life of the machine.
maintenance
For a long time do not use the equipment should be the power plug from the outlet of down.At least half a year using a device to ensure the service life of equipment. If the equipment malfunction, please have qualified personnel maintenance, don’t disassemble equipment without permission.
IMPORTANT SAFETY INSTRUCTIONS:
WARNING – When using this product, basic precautions should always be followed, including the following:
- Read all the instructions before using the product.
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not put fingers or hands into the product.
- Do not expose power bank to rain or snow.
- Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons.
- Do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
- Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not disassemble the power bank. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 100°C may cause explosion. The temperature of 100°C can be replaced by the temperature of 212°F.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Switch off the power bank when not in use.
Hame Technology Co., Limited
Add: 3/F, Plant #1, Huahan Industrial Park,No.16, Jinniu West Rd.,
Pingshan New District,Shenzhen 518118, China. Website:
www.hametech.com
Enterprice Standard： Q/HAME 002-2016