hama 00176596 WiFi Weather Station with Outdoor Sensor Instruction Manual

hama 00176596 WiFi Weather Station with Outdoor Sensor

Explanation of warning symbols and notes

Risk of electric shock

This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

Warning

This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

Safety instructions

•  The product is intended for private, non-commercial use only.
•  Use the product only for the intended purpose.
•  Protect the product from dirt, moisture and overheating and use it in dry rooms only.
•  The product is intended only for use inside buildings.
•  Only use the article under moderate climatic conditions.
•  As with all electrical products, this device should be kept out of the reach of children.
•  Do not operate the product outside the power limits given in the specifications.
•  Do not use the product in areas in which electronic products are not permitted.
•  Do not use the product in a damp environment and avoid splashing water.
•  Do not drop the product and do not expose it to any major shocks.
•  Do not modify the product in any way. Doing so voids the warranty.
•  Keep the packaging material out of the reach of children due to the risk of suffocation.
•  Dispose of packaging material immediately in accordance with the locally applicable regulations.
•  Route all cables so there is no risk of tripping.
•  Do not bend or crush the cable.
•  Always pull directly on the plug when disconnecting the cable, never on the cable itself.
•  Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
•  Do not place the product near interference fields, metal frames, computers, TVs, etc. Electronic devices and window frames can negatively affect the product’s functionality.

Risk of electric shock

•  Do not open the device or continue to operate it if it becomes damaged.
•  Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
•  Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Package contents

1. 1x weather station with power
2. supply unit 1x quick start guide
3. 1x outdoor sensor

Controls and displays

Weather station controls

Outdoor sensor controls

Getting started

Inserting / changing the batteries

Warning – Batteries

•  When inserting batteries, note the correct polarity (+ and – markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
•  Only use batteries (or rechargeable batteries) that match the specified type.
•  Before you insert the batteries, clean the battery contacts and the polarity contacts.
•  Do not allow children to change batteries without supervision.
•  Do not mix old and new batteries, or batteries of different types or from different manufacturers.
•  Remove the batteries from products that are not being used for an extended period (unless these are being kept ready for an emergency).
•  Do not short-circuit batteries.
•  Do not charge batteries.
•  Do not burn batteries.
•  Keep batteries out of the reach of children.
•  Never open, damage or swallow batteries or allow them to enter the environment. They can contain toxic, environmentally harmful heavy metals.
•  Remove spent batteries from the product and dispose of them without delay.
•  Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
• Remove the battery cover on the back of the outdoor sensor and on the weather station.
•  Remove the spent batteries and dispose of them if required. Insert two new type AA batteries into the weather station and the outdoor sensor. Take care to ensure the correct polarity as shown in the diagram in the battery compartment.
•  In the outdoor sensor’s battery compartment, press the channel selector switch to set the correct channel. Using the Down button on the weather station, select the same channel you have selected on your outdoor sensor.
•  The channel connection display for the top left outdoor sensor in the “Outdoor” section of the weather station now flashes for around 3 minutes until the weather station adopts the measurement data from the outdoor sensor.
•  Close the battery compartment by reattaching the covers to the rear of the weather station and the rear of the sensor.

**Installing the app

**

Warning

•  Only operate the product from an approved socket that is connected to the public power supply. The socket must be installed close to the product and must be easily accessible.
•  Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
•  If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
•  If you will not be using the product for a prolonged period, disconnect it from mains power.

Integrating devices into the Hama Smart Home (Solution) app

•  Ensure that the weather station is connected to the power supply and that the WiFi symbol below the time display is flashing.
•  When the weather station is switched on for the first time, the Pairing indicator appears below the time display. If this is not the case, press and hold the WiFi button for approx. 5 seconds.

1.  Open the app and select “My home” at the bottom left-hand edge of the screen.
   •  Then tap the “+” at the top right-hand edge of the screen and select the category “Weather station”.
   •  Now select your WiFi network and enter your password.
   •  Check the box in the “Next step” and click NEXT. Your device is now connected.
2. Once pairing is complete, the APP automatically returns to the product’s main screen. The weather station now automatically updates the network time, reports the air pressure, the indoor temperature and humidity and temperature and ambient humidity of the outdoor channel.
3. In the final step, you can assign a name to the weather station. Click on “Done” to complete the process.

If the previously described method for integrating the fan does not work, there is the option of connecting the device via access point (AP mode).

•  In the first step, the WiFi indicator below the time must flash slowly. If this is not the case, press and hold the WiFi button for approx. 5 seconds.
•  If the pairing process fails, you can try it again a few times. If this does not work, press the “WIFI UP” button once. The display changes to “02 AP and WIFI”.
•  “AP” flashes on the display and the WiFi indicator flashes once every 3 seconds.
•  Now proceed in the same way as described before. Before you tick “Next step”, select AP mode in the top right-hand corner.
•  The following screen appears:
• Now tick the next step, click Next and select “Connect now” on the next screen. In the WLAN network overview, select the network with the name  SmartLife_XXXX.
• You can ignore any error message that you are currently not connected to the Internet and then return to the Hama Smart Home (Solution). Your weather station is now connected.
•  The weather station may display the previously collected data in the app. Click the graph icon at the bottom left to call up the interface for collected data.
•  To change the weather station’s basic settings, click the gearwheel symbol at the bottom right.

Data transfer of the outdoor sensor

Extended usage options with scenarios
Scenarios and automated sequences that can be created in the app allow various combination options and usage options for these products, depending on the SmartHome products in your home. Programming is always carried out via the app (see Section 4 of the App Guide) and will be offered / suggested to you on an individual basis.

Standard usage option

Extended usage option

Weather station settings

Manual time setting

•  Press the “MODE” button to toggle between the time / seconds and time / weekday displays.
•  Press and hold the “MODE” button for around 2 seconds. The 12/24-hour mode display starts to flash. Use the WiFi/Up button or DOWN button to select the required mode.
•  Press “MODE” to confirm the previous setting. The time zone starts to flash. Now press the WiFi/UP button and the DOWN button to set the correct time zone.
•  Press “MODE” to confirm the previous setting. The hour display starts to flash. Now press the WiFi/UP button and the Down button to set the correct hour.
•  Press “MODE” to confirm the previous setting. The minute display starts to flash. Use the WiFi/UP and Down button to set the correct minute.
•  Press the “MODE” button to confirm the previous setting. The display for the “Month and date” icon starts to flash. Press the WiFi UP and DOWN button again to set the date display to month / day or day / month.
•  Press the “MODE” button to confirm the setting. The year display 2016 starts to flash. Press the WiFi-Up and DOWN button to set the correct year.
•  Press the “MODE” button to confirm the previous setting. The month display starts to flash. Now use the WiFi Up and “DOWN” button to set the correct month.
•  Press the “MODE” button to confirm the setting. The date display starts to flash. Now select the WiFi UP and Down button to set the correct date.
•  Select the “MODE” button to confirm the setting. The language selection for the weekday indicator starts to flash. Now use the WiFi UP and DOWN button to select the language for displaying the weekday.
•  Press the “MODE” button to confirm the setting. The temperature display, which is shown in °C by default, now starts to flash. Now select WiFi UP and the Down button to set the temperature in °C or °F.
•  Press “MODE” to confirm your setting. The default air pressure value mb / hPA starts to the flash. You can now use the WiFi UP and DOWN button to set the pressure unit to mb/hPa, hPA, inHg or mmHg.
•  Press “MODE” to confirm this setting and to end the setting process. Return back to time mode.

Note

•  If no buttons are pressed within 20 seconds, the clock automatically switches from setting mode to normal mode.
•  The weekdays can be displayed in 7 different languages: English, German, Italian, French, Spanish, Dutch and Danish.

Phases of the moon

The weather station has a display that automatically shows the current phase of the moon.

Display of temperature / ambient humidity / air pressure and temperature /ambient humidity trend

•  The current indoor temperature / ambient humidity / air pressure and the temperature / ambient humidity trend (indoors) are shown on the LCD display.
•  Following successful connection to the outdoor sensor, the weather station can display the outdoor temperature / ambient humidity and the temperature / humidity trend (outdoors).

The following displays may appear:

• The temperature / ambient humidity is rising.
• The temperature / ambient humidity is remaining constant.
• The temperature / ambient humidity is falling.

Maximum / minimum temperature / relative humidity:

•  Press the “MEM” button to toggle between the maximum and minimum temperature and humidity data for indoors and outdoors:•
• Once to display the maximum values for temperature and ambient humidity.
•  Twice to display the minimum values for temperature and ambient humidity.
•  Three times to return to the current values for temperature and ambient humidity.
•  Press and hold the MEM button for around 2 seconds to reset the maximum and minimum temperature and ambient humidity. This resets all recorded minimum and maximum data to the values shown currently.

Note

•  If the temperature value is below the range that the weather station is able to display, “LL.L” appears.
•  If the temperature is above the range that the station is able to display, “HH.H” appears.
•  If the battery symbol appears, the batteries should be replaced as soon as possible.

Frost indicator
If the outdoor temperature is between 1°C and 3°C (or 33.8°F and 37.4°F), the frost symbol flashes in the form of a snowflake.

The weather forecast

The weather station calculates a weather forecast for the next approximately 12 hours on the basis of the barometric pressure trend. Of course, this forecast cannot be compared with professional weather services which use satellites and high-performance computers. It does however provide an approximate indicator of the weather developments. Please take the weather forecast from your local weather forecasting service into account along with that of your weather station. If there are differences between the information from the weather station and the local weather forecast, please use the advice from the local weather forecast service as your guide.

The weather station uses the following symbols

The weather station can show the air pressure trend. You will see the following symbols on the display:

• The air pressure is rising.
• The air pressure is remaining constant
• The air pressure is falling.

Backlight

•  Press the WiFi/UP button to adjust the brightness of the backlight in four stages.
•  If you disconnect the product’s power supply unit, the device is automatically operated in battery mode. Pressing any button allows you to switch on the weather station’s backlight for 8 seconds.

Warning

If used without a power supply unit, the WiFi connection is disconnected automatically.

A summary of the weather station functions

•  Perpetual calendar until 2099
•  Days of the week can be set by the user in 7 languages:
• English, German, Italian, French, Spanish, Dutch and Danish
•  Time in optional 12/24-hour format
•  The phase of the moon indicator
•  Air pressure
• Air pressure measuring ranges:
• 600 hPa / mb to 1100 hPa / mb
• 17.72 inHg to 32.50 inHg
• 450.1 mmHg to 825.2 mmHg
•  Air pressure is alternatively specified in hPa/mb, inHg or mmHg
•  Measuring range for ambient humidity: 20% rH to 95% rH
• Indoor temperature
• Temperature measuring ranges: -20 ° C to 60 ° C, 4°F to 140 °F
•  Temperature can be displayed in °C or °F
•  Minimum/maximum display for ambient humidity and temperature
•  The weather forecast works according to the change in air pressure
•  Power supply unit: 5.0 V, 1.2 A
•  Batteries: 2 x type AA, optional

Technical data

Wireless outdoor sensor

Care and maintenance

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use. Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and support

• Please contact Hama Product Consulting if you have any questions about this product.
• Hotline: +49 9091 502-0 (German/English)
• Further support information can be found here: www.hama.com

Disposal instructions

Note on environmental protection:

Following the implementation of European Directives 2012/19/EU and 2006/66/EU into the national legal systems, the following applies: Electrical and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries to the designated public collection points or to the point of sale at the end of their service life. Detailed information on this topic is defined in the national laws of the respective country. This presence of the above symbol on the product, operating instructions or package indicates that the product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/batteries, you are making an important contribution to protecting our environment.

Declaration of conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00176596] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.hama.com -> 00176596 -> Downloads.

• Frequency band(s)              2.4 GHz
• Maximum radio-frequency power transmitted    < 100mW

References

• hama.com
• Offizieller Hama Onlineshop
• Startseite hama.com
• Smart Home hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>