soundcore A3600L Liberty Frames Glasses User Guide

June 6, 2024
Soundcore

soundcore A3600L Liberty Frames Glasses

soundcore A3600L Liberty Frames Glasses PRO

SUPPORT

For FAQs, detailed user manual and more information, please visit www.soundcore.com/support

APP

Download the Soundcore app to set up the frames, customize EQ, update firmware, and explore more. Ensure to keep the firmware up to date before each use.

ASSEMBLING

Push the audio temples into position on the hinges so they are securely attached.

ACTIVATING/CHARGING

Before using for the first time, activate your Soundcore Liberty Frames by using the provided magnetic charging cable for at least 5 seconds. Fully charge your Soundcore Liberty Frames before the first use.

POWERING ON/OFF

Soundcore Liberty Frames will automatically power on when you wear them. After removing them they will power off after 5 minutes.

PAIRING

Soundcore Liberty Frames will automatically enter Bluetooth pairing mode when you wear them. Select “Soundcore Liberty Frames” on your device’s Bluetooth list to connect.

CONTROLS

x2: Tap twice Slide forward/backward (logo area) Touchpad controls can be customized in the Soundcore app.

VOICE CONTROL

Easily control with no wake up word. Only the 8 voice commands above are supported. You can choose your language in the Soundcore app.

RE-PAIRING

To pair with another device, wear them and press and hold the logo area on both audio temples for 3 seconds until you will hear the voice prompt.

AUTO-PAUSE/RESUME

The playback will auto-pause when taking Soundcore Liberty Frames off, and it will resume when you wear them.

RESET

Press and hold the logo area on both audio temples for 10 seconds until you hear the voice prompt.

DISASSEMBLING

If you want to change the frames, hold the quick release hinges and pull the audio temples slightly to disassemble.

Important Safety Information

  • Read and keep these instructions.
  • Follow these instructions.
  • Heed all warnings.
  • Do not use this product near water.
  • Do not expose this product to rain, liquids or moisture.
  • The product should not be exposed to dripping or splashing.
  • Do not submerge in water.
  • The product should not be exposed to excessive heat such as direct sunshine, fire or the like.
  • Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil to clean.
  • Small objects included may be a choking hazard. Keep out of reach of the children.
  • This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
  • Do not make unauthorized alterations to this product.
  • Do not wear this product while charging.
  • After each use, wipe both sides of the lens and all parts of the frame.
  • When not in use, store the product in the case provided.
  • Use only original accessories.
  • Tinted eyewear is not recommended to be worn for night driving.
  • Not for use as eye protection against mechanical impact hazards.

Hearing Safety

  • To avoid hearing damage, do not listen for extended periods at high volume.
  • Do not turn the volume so high that you’re unable to hear your surroundings.
  • To avoid hearing damage, use this product at a comfortable, moderate volume level.
  • Turn the volume up gradually until you reach a comfortable listening level.
  • Use caution while driving and follow applicable laws regarding use of a mobile phone.
  • Focus on your safety and that of others if you use this product while engaging in any activity requiring your attention, e.g., while driving a bicycle or walking in or near traffic, a construction site or railroad, etc. Remove this product or adjust the volume to ensure you can hear your surrounding sounds, including alarms and warning signals.
  • Do not use the product if they emit any loud unusual noise. If this happens, power off and contact our customer service.
  • Remove immediately if you experience a warming sensation or loss of audio.

Notes

  • This product complies with the ANSI Z80.3 and EN ISO 12312-1.
  • Sunglasses(nonprescription) are devices that consist of spectacle frames or clips with absorbing, reflective, tinted, polarizing, or photosensitized lenses intended to be worn by a person to protect the eyes from bright sunlight but not to provide refractive corrections.

Notice
This product complies with the radio interference requirements of the European Community.
CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A3600L/A3600R is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.soundcore.com  Maximum output power: 10 dBm Frequency band: 2.4G band(2.402GHz-2.480GHz) The following importer is the responsible party (contract for EU and UK matters) Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany This product complies with the radio interference requirements of the United Kingdom

Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A3600L/A3600R is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet address:
https://www.soundcore.com
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Left Frame, A3600L FCC ID: 2AOKB-A3600L IC: 23451-A3600L Right Frame, A3600R FCC ID: 2AOKB-A3600R IC: 23451-A3600R The following importer is the responsible party Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 (800) 988 7973

RF Warning Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals