ANKER A3102H SoundCore Bluetooth Speaker User Guide

June 6, 2024
Anker

A3102H SoundCore Bluetooth Speaker
User Guide

What’s Included

At a Glance

1 Power button 6 3.5mm Aux input
2 Volume buttons 7 Micro USB charging port
3 Play/Pause button 8 Microphone
4 Bluetooth pairing button 9 Status indicator
5 Battery indicator

Using Your SoundCore

Turn on / off
ANKER A3102H SoundCore Bluetooth Speaker - Turn on
SoundCore will automatically turn off after 10 minutes if no device is connected.

Charge your SoundCore


Flashing red Low power
Steady red Charging
Off Fully charged

Use the included USB cable to charge your SoundCore and make sure it is fully charged before first use.

Pair with your device

Un-pair connected device and re-enter pairing mode

Rapidly flashing blue Pairing mode
Steady blue Connected to a device

When turned on, SoundCore will automatically connect to the last connected device if available. If not, SoundCore will enter pairing mode.
Have connection problems? Remove SoundCore from your device’s Bluetooth history, ensure it’s less than 3 feet away then try pairing again.

Connect via AUX

ANKER A3102H SoundCore Bluetooth Speaker - Connect via
AUX

  • sounding AUX cable sold separately.
Rapidly flashing blue AUX mode

When using AUX mode, control audio playback via the connected device.

Controls


| Play / pause
| Skip forward
| Volume up / down
| Answer / End call
| Reject call
| Put the current call on hold and answer an incoming call
| Switch between held call and active call

Specifications

Input 5 V 1 A
Audio output 3 W × 2
Charging time 5 – 6 hours
Playtime (varies by volume level and content) 24 hours
Waterproof level IPX5
Size 165 × 45 × 54 mm

6.5 × 1.8 × 2.1 in
Weight| 365 g / 12.9 oz
Range| 20 m / 66 ft

Attention

| Use original or certified cables
---|---
| Don’t disassemble
| Avoid dropping
| Avoid extreme temperatures

Do not expose batteries to high heat such as direct sunlight, fire, or the like.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

RF Warning Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
The following importer is the responsible party Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 7973
Trademark
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.
**This product complies with the radio interference requirements of the European Community.
CAUTION:** RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the radio equipment type A3102 is in compliance with Directive 2014/53/ EU. The full text of the EU declaration of conformity is available at the following internet address: www.anker.com
Maximum output power: 2.03dBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)

IC NOTICE TO CANADIAN USERS

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development
Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3 (B) / NMB-3 (B)
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Customer Service

18-month limited warranty
Lifetime technical support
support@anker.com
+1 (800) 988 7973 (US) Mon-Fri 6:15 – 17:00 (PT)
For FAQs and more information, please visit:
www.ankeroficial.com.br
www.anker.com
anker.com/support

@Anker
@Anker Japan
@Anker Deutschland

@AnkerOfficial
@Anker_JP

@Anker

Product Number A3102
Bluetooth Speaker
51005003020 V01

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals