hama 00201679 FC10 Metal Wireless Charger Instruction Manual

hama 00201679 FC10 Metal Wireless Charger

product overview

Operating instruction

Controls and displays

1. USB-C input
2.  Status LED

LED function indicator

Power supply| Solid red
Standby| Solid red
Charging process| Solid blue
End of charging| LED goes out 1)
Error message| Flashes alternately red and blue

1.  The display at the end of charging may differ on some devices, depending on the manufacturer.
   Thank you for choosing aHama product.
   Take your time and read the following instructions and information completely.Please keep these instructions in asafe place for futurereference. If you sell the device, please pass these operating instructions on to the new owner.

Package contents

 “FC15 Metal” Wireless Charger for Smartphones  1xUSB-C cable

 These operating instructions

•  Protect the product from dirt, moistureand overheating and use it in dry environments only.
•  Do not drop the product and do not expose it to any major shocks.
•  Do not operate the product outside the power limits specified in the technical data.
•  Do not use the product in areas in which electronic products arenot permitted.
•  Ensurethat the product is not covered up by textiles, metal or other objects in order to avoid damage caused by overheating.
•  Dispose of packaging material immediately in accordance with the locally applicable regulations.
•  Do not modify the product in any way.Doing so voids the warranty.
•  Do not continue to operate the product if it is visibly damaged.
•  Use the product only for the intended purpose.
•  Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
•  Only use the article under moderate climatic conditions.
•  As with allelectrical products, this device should be kept out of the reach of children.
•  Do not use the product in adamp environment and avoid splashing water.
•  Do not bend or crush the cable.
•  Never apply force when using the product or during installation.
•  Take carethat components such as airbags, safety areas, controls, instruments, etc. and visibility arenot blocked or restricted.
•  Ensurethat the product is securely mounted beforeevery journey.
•  Do not allow yourself to be distracted by the product when driving avehicle. Always pay attention to the surrounding trafficand your environment.
• Always pull directly on the plug when disconnecting the cable, never on the cable itself.

Warning

• Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted
• Ensurethat thereare no metal parts (e.g. metal plate for magnetic holders) on the back of your device. Metal heats up significantly in the field of an induction charger and can damage your device and/or the charger.

Risk of electric shock

•    Do not open the device or continue to operate it if it becomes damaged.
•  Do not use the product if the charging cable, adapter cable or power cable is damaged.
•  Do not attempt to service or repair the product yourself.Leave any and all service work to qualified experts.

 Start-up and operation

Warning 

• Only operate the product from asocket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
•  Disconnect the product from the power supply using the On/Off switch –ifthis is not available, unplug the power cordfromthe socket.
•  If using amulti-socket power strip, make surethat the total power consumption of all connected devices does not exceed the power strip’smaximum throughput rating.
•  If you will not be using the product for aprolonged period, disconnect it from mains power.

Note

• To be able to charge your device via the wireless charger,itmust be compatible with induction charging technology.For moreinformation, please refer to the operating instructions of your device.
•  Note that mobile phone cases, covers, etc., and other materials between the wireless charger and the back of your device may interferewith or even prevent the charging process.
• Connect the enclosed USB-C cable with the USB-C input (1) on the inductive charger and the USB output on the enclosed quick-charging device.

Note

• The maximum charging power of up to 15 Wisguaranteed with the enclosed Qualcomm quick-charging device.
• An active power supply is confirmed by the status LED (2) lighting up red.

Warning

• Do not use defective chargers or USB ports and do not attempt to repair them.
• Place your device with its back on the inductive charger (B).
• The charging process begins as soon as an effective induction field has been established. The status LED
•  lights up solid blue. The current charge status is displayed on your device.
• If no induction connection can be established, change the position of your device if necessary (B).
• The charging process ends automatically once your device’s battery is fully charged. The status LED (2) goes out.

Care and maintenance

Only clean this product with aslightly damp, lint-free cloth and do not use aggressive cleaning agents. Ensure that no water is able to enter the product.

Note
Disconnect the device from the mains beforecleaning and during prolonged periods of non-use.

**Warranty Disclaimer

**

Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or safety notes

Technical data

Wireless charger

Input

| 5V __ max. 2.0 A

9V __ max. 1.67 A

Output (under optimised conditions)| max. 10 W
Dimensions| Ø 100 x 7.6 mm

Declaration of Conformity

Hama GmbH &CoKG hereby declares that the radio equipment type [00201680] is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:
www.hama.com -> 00201680 -> Downloads.

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>