PYLE PLMRBT20 Amplified Wireless BT Audio Controller User Guide
- June 6, 2024
- Pyle
Table of Contents
- PYLE PLMRBT20 Amplified Wireless BT Audio Controller
- WIRE DIAGRAM
- WIRELESS BT PAIRING AND CONNECTION
- AUTO RECONNECTION
- PLAYING MUSIC
- INSTALLATION °SEAMLESS FLUSH MOUNT
- FEATURES
- WIRELESS BT MUSIC STREAMING:
- WHAT’S IN THE BOX
- TECHNICAL SPECS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PYLE PLMRBT20 Amplified Wireless BT Audio Controller
WIRE DIAGRAM
Wire Color
- Yellow Battery (+), 12dc
- Black Battery (-), Ground
- Red ACC
- Blue REMOTE
- White CH1 (+)
- White/Black CH1 (-)
- Gray CH2 (+)
- Gray/Black CH2 (-)
- Green CH3 (+)
- Green/Black CH3 (-)
- Purple CH4 (+)
- Purple/Black CH4 (-)
WIRELESS BT PAIRING AND CONNECTION
Power: Press and hold the power button to power ON/OFF.
Wireless BT Streaming Connection:
- Ensure BT ability is activated, then search for the PLMRBT20 from your BT-enabled device. The light will turn blue and blinks while waiting for BT connection.
- The PLMRBT20 BT Network Name will appear as “PyleUSA” (No password is required for connecting).
- When the BT is connected, the light will turn blue and stops blinking.
- Input mode indicator: Blue light for BT, red light for AUX In, and purple light for USB.
AUX˜IN
Short press to switch BT mode/Aux-in /USB mode.
AUTO RECONNECTION
- When the device is out of the BT range, BT will be disconnected automatically, the light turns blue while blinking.
- BT will automatically reconnect when detected in range again in 10 minutes.
- Disconnected BT after 10 minutes, you need to process BT connection steps (above) to reconnect BT again.
- If the other device occupied the BT during this period (10mins), you need to process BT connection steps (above).
- If there is no connection during this period (10mins), it will turn to standby mode.
PLAYING MUSIC
- Press and hold for 3 seconds to Power ON or OFF.
- Short press to play music or pause.
- Short press to switch BT mode/Aux-in /USB mode
- Short press for next track, press and hold for volume up.
- short press down. or previous track, press and hold for volume
- Press and hold to disconnect BT.
INSTALLATION °SEAMLESS FLUSH MOUNT
Size:
- 96mm/3.8’’ (Out Diameter)
- 76mm/3.0’’ (Cutout Diameter)
- 93mm/3.7’’ (Depth)
FEATURES
- Universal Mount Wireless BT Streaming Control Unit
- Built-in Wireless BT Audio Receiver
- Waterproof-Rated Marine Grade Construction
- Water-Resistant & Weatherproof Design
- 4-Channel Amplifier Style
- Connect & Stream Audio from Additional External Devices
- Aux (3.5mm) Input connector Jack /USB Port
- Full Range Stereo Sound Reproduction
- Integrated Power Wiring Harness
- Pre-Amp RCA Out to Any OEM/Factory-Made Mono-Block/Full-Range Amplifier
- Flush Mount Mounting Kit Included
- Universal Vehicle Mounting
- Can be In-Console Flush Mount
- Anti-Thump Turn-On
- Soft Turn On / Off
- Overload & Power Protection Circuitry
- Used for Car, Truck, ATV, UTV, 4×4, Boat, Marine Watercraft, Power Sport Vehicles
- USB Charging (2A)
WIRELESS BT MUSIC STREAMING:
- Simple & Hassle-Free Pairing
- Instant Wireless Audio Streaming Receiver
- Works with All of Today’s Latest Devices Smartphones, Tablets, Laptops, Computers, etc.
- Wireless BT Version: 5.0
- Wireless BT Network Name: ‘PyleUSA’
- Wireless Range: 30’+ ft.
WHAT’S IN THE BOX
- Wireless BT Control Unit
- Audio Connection Cable, 3.5mm
TECHNICAL SPECS
- Power Output: 300 Watt MAX
- 4 x 35 Watts RMS @ 4 Ohm
- 4 x 75 Watts MAX @ 4 Ohm
- Marine Grade Waterproof Rating: IP-65
- Amplifier Type: Class-D
- T.H.D: 0.1%
- S/N Ratio: > 95 dB
- Channel Separation: > 65 dB
- Frequency Response: 10 – 40kHz
- Fuse: 15A
- Cut-Out Diameter: 3’’ –inches
- Mounting Depth: 3.7’’ –inches
- Power: DC 12V
- Total Unit Dimensions (L x W x H): 3.8’’ x 3.8’’ x 4.17’’ –inches (Flush Mount)
Questions? Issues?
We are here to help! Phone: (1)
718-535-1800 Email:
support@pyleusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>