Dongguan Tongwei Electronic Technology Co Ltd 2BGLY-Q10 Bluetooth Headset Instruction Manual
- June 6, 2024
- Dongguan Tongwei Electronic Technology Co Ltd
Table of Contents
GREATWALL Bluetooth Headset
Instruction manual
Tianjin Great Wall Electronics Co., LTD
Made in China
Product parameter
Product brand: GREATWALL
Rated voltage: 5V
Charging time: 1.5 hours
Transmission distance =10m
Rated battery capacity :300mAh
Implementation standard: GB 4943.1–2022
Product accessories
- Bluetooth headset…………….. x1
- Charging cable…………………. X1
- User instructions……………… x1
Operation instruction
1. Boot
Method 1 : Remove the left and right earphones from the charging
compartment, and turn on the earphones.
Method 2: When the headset is turned off (outside the charging bay), long
touch the left and right multifunctional touch keys of the headset for about 5
seconds to turn onthe headset.
2.Power Off
Method 1: Put the left and right earphones directly into the charging bin
and turn off the earphones.
Method 2 : Long touch the multi-function keys of the left and right
arphones in the startup state for about 5 seconds to shut down the earphones.
Note: When the headset is turned on, it will automatically shut down if
itis not paired with the corresponding Bluetooth device for 3 minutes, Beyond
the effective connection distance of the signal, not connected with the
corresponding Bluetooth device. 3 minutes later, the headset will
automaticallyshut down.
3.pairing
A. If there is no pairing record for the left and right earphones, the left
and right earphones are automatically paired after being turnedon.
B. When the left and right earphones have pairing records, they are
automatically connected back on startup,
4. The left and right ears switch automatically
A. During the use of headphones, put the left (right) ear into the charging
box to charge, and it will automatically switch to the right (left) ear to
play (and continue to maintain the music state before the switch).
B. During the use of headphones, put the left (right) into the charging box to
charge, which will not affect the normal work of the right (left) ear.
C.During the use of any one ear after the headset is connected, the other
headset can be automatically TWS connected, and the left ear ortheright ear
can continue the current working state.
D. Open the left ear or the right ear separately to connect the phone.
S. Pair and connect with Bluetooth devices
Open the “Bluetooth Settings” option for the Bluetooth device to be paired.
Enter the options, find the Bluetooth pairing name, and click the pairing name
to pair.
6. Play music
Previous: Continuously short touch the left earphone multi-function touch
key three times
Next: Touch the multifunctional touch key of the right earphone three
times continuously
Volume plus: Touch the multi-function touch button on the right earphone
twice
Volume reduction: Continuously touch the multi-function touch button on
the left earphone twice
Pause/Play: Short touch any headset multi-function touch button once
7. Phone speakerphone (dual headset pairing operation)
When a call comes in, answer it: touch the multi-function touch button of any
headset once
When an incoming call comes in, reject the call: touch the multi-function
touch key of any headset for 2 seconds
End the call and hang up: When the call is connected, touch the multi-function
touch button of any headset once
8. Phone speakerphone (single headset operation)
When a call comes in, answer it: touch the multi-function touch button of the
headset once
When an incoming call comes in, reject the call: touch the multi-function
touch button of the headset for 2 seconds End the call and hang up: Touch the
multi-function touch button of the headset once
9. Activate the voice assistant
Activate the voice assistant: Touch the multifunctional touch button on any
headset for 2 seconds and release it to activate the intelligent voice
function.
10. Indicator display
Charging bin to charge the headset: in the process of charging the headset,
the charging bin indicator light is white and steady; When fully charged, the
indicator light of the charging bay is extinguished.
Charging the charger to the charging bin: When the charger is charging the
charging bin, the orange light of the charging bin flashes, and the orange
light is steady on when it is fully charged.
Warranty statement
Disclaimer:
This manual is without any warranty, position expression or other implication,
the products, specifications and information mentioned in this manual are for
reference only, and the content will be updated from time to time on the
website without prior notice.
Warranty Statement:
Make the following warranties for the products attached to this document: If
the products are damaged due to quality defects under normal use within three
years from the date of purchase (the “Warranty Period”), they will be repaired
free of charge; Can not be repaired by the manufacturer, free replacement;
After repair or replacement of the product, in the remaining warranty period
(minimum of not less than 30 days) continue to enjoy the warranty. The date of
purchase is subject to the date of the sales invoice, If the date of purchase
cannot be determined, the warranty period shall be calculated for thirteen
(13) months from the date of manufacture of the product.
When applying for warranty, you need to provide a valid sales invoice that is
accurate, complete and clearly filled out.
The above warranties do not apply to:
- More than three packages of validity;
- The warranty card and product code are not consistent with the product body,
- Failure or damage caused by misuse, abuse or improper transportation, use, maintenance or storage;
- Failure or damage caused by force majeure (such as earthquake, war, fire, etc.) or accidents;
- Zipper and buckle are damaged due to excessive force;
- Off-line or tear caused by excessive load;
- Any damage caused by sharp objects;
- Products with signs of burning damage or flooding;
- Damage caused by unauthorized demolition;
- Aging, decolorization, wear, breakage and other losses that occur during the normal use of the product.
- If the original identification label of the product is changed or damaged, this warranty will be invalid. The 1Q appearance of the products and accompanying materials is not guaranteed and you should inspect the products on the spot upon receipt and object to any discrepancies.
The above guarantees are all our guarantees for the products and are only
applicable in Chinese Mainland. Nothing in this document shall affect consumer
rights that cannot be excluded or restricted by law.
Brand owner: Tianjin Great Wall Electronics Co., LTD
Add: No.16 Youyi Road, Hexi District, Tianjin
Manufacturer: Shenzhen Yueshiyin Technology Co., LTD
Add: Building B, Nanming Road, Tangwei Community, Fenghuang
Street, Guangming New District, Shenzhen
Service hotline: 400-8798-082
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in
portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>