LAYZEE LIVING Timber Decking Kits Instructions
- June 6, 2024
- LAYZEE LIVING
Table of Contents
LAYZEE LIVING Timber Decking Kits
Product Information
Specifications:
- Product Name: Layzee Living Timber Decking Kit
- Material: Timber
- Length: Customizable, comes in sections for longer decks
- Includes: Joist hangers, screws, weed membrane
Product Usage Instructions
Assembly Steps:
- Unscrew 90mm packers from metal brackets and discard.
- Screw the joist hangers onto the frame in the pre-marked and pre-drilled locations.
- Slot the internal joists into joist hangers, place one on each end of the frame, and screw together with 100mm screws.
- If the decking is 5.4m or longer and in two sections, repeat step 2.
- If both frames are ready to join together, place them end to end and screw together.
- Lay out the black weed membrane and place the frame on it to secure.
- Level the deck, measure corner to corner to ensure it’s square.
- Place the first deck board flush with the edge of the decking.
If you are unsure or do not understand the instructions, please contact us via email at info@layzeeliving.co.uk or via telephone at 02078673959.
FAQ
Q: Can the Layzee Living Timber Decking Kit be customized for different sizes?
A: Yes, the decking kit can be customized as it comes in sections, especially for longer decks.
Q: What should I do if I encounter issues during assembly?
A: If you face any issues during assembly or do not understand the instructions, please reach out to us for assistance via email or telephone as provided in the manual.
Instructions for assembling Layzee Living Timber Decking Kit.
-
Unscrew 90mm packers from metal brackets and discard.
-
Screw the joist hangers onto the frame in the locations that have been marked out and pre-drilled for you
-
Slot the internal joists into joist hangers and place one on each end of the frame and screw together with 100mm screws supplied, internal joists fix into the hangers, the end joists are simply screwed through the timber and into the end of the joist/ frame.
-
If your decking is 5.4m or longer it will be in two sections so repeat step 2.
-
If deck is 5.4m or longer and both frames are now ready to join together place end to end and screw together with screws supplied, so you know which sides go together joist hangers would be back-to-back.
-
Lay out the black weed membrane and lay frame down on it to secure
-
Now level your deck and with a tape, measure corner to corner and make sure deck is square.
-
Place first deck board in position flush with edge of decking, we advise that you pre drill just the ends of the decking so when screws go in you don’t split the timber; 2 green decking screws per joist.
-
Leave a 5mm approx. gap between each board and start to fix moving down the length of the frame, once half way place all the boards on and see if you can get last board on without having to cut it down, this saves time and looks better.
-
Finally, you have enough trimmed down decking boards to cover both ends and one side. Fit ends first which are cut to correct length. Lastly do the front or longest side. You may have to join two lengths together, if so fit and then cut off with a saw.
-
Decking is now complete, enjoy!
If you are unsure or do not understand the instructions, please contact us either via email on info@layzeeliving.co.uk or via telephone on 02078673959.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>