Haier HIC-654CF-S 4-Burner 65cm Gas Hob User Guide

HIC-654CF-S 4-Burner 65cm Gas Hob
User Guide

Dear Customer,
Thank you for having purchased and given your preference to our product. The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance. Please preserve this booklet carefully. It may be useful in future, either to yourself or to others in the event that doubts should arise relating to its operation. This appliance must be used only for the task it has explicitly been designed for, that is for cooking foodstuffs. Any other form of usage is to be considered as inappropriate and therefore dangerous. The manufacturer declines all responsibility in the event of damage caused by improper, incorrect, or illogical use of the appliance.

IMPORTANT SAFETY PRECAUTIONS AND RECOMMENDATIONS

IMPORTANT: This appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any nondomestic application and therefore should not be used in a commercial environment. The appliance guarantee will be void if the appliance is used within a nondomestic environment i.e. a semi-commercial, commercial or communal environment. Read the instructions carefully before installing and using the appliance.

• This appliance has been designed and manufactured in compliance wi -th the applicable standards for household cooking products, including those for surface temperatures.
• Some people with sensitive skin may have a more pronounced temperature perception with some components although these parts are within the limits allowed by the norms.
• The complete safety of the appliance also depends on the correct use, we, therefore, recommend always paying extreme attention while using the product, especially in the presence of children.
• After having unpacked the appliance, check to ensure that it is not damaged. In case of doubt, do not use it and consult your supplier or a qualified technician.
• Packing elements (i.e. plastic bags, polystyrene foam, nails, packing straps, etc.) should not be left around within easy reach of children, as these may cause serious injuries.
• Some appliances are supplied with a protective film on steel and aluminum parts. This film must be removed before using the appliance.
• IMPORTANT: The use of suitable protective clothing/gloves is recommended when handling or cleaning this appliance.
• Do not attempt to modify the technical characteristics of the appliance as this may become dangerous to use. The manufacturer declines all responsibility for any inconvenience resulting from the observance of this condition.
• CAUTION: this appliance must only be installed in a permanently ventilated room in compliance with the applicable regulations.
• Do not carry out cleaning or maintenance operations on the appliance without having previously disconnected it from the electric power supply.
• Do not use a steam cleaner because the moisture can get into the appliance, therefore, making it unsafe.
• Do not touch the appliance with wet or damp hands (or feet).
• Do not use the appliance whilst in bare feet.
• If you should decide not to use this appliance any longer (or decide to substitute another model), before disposing of it, it is recommended that it be made inoperative in an appropriate manner in accordance to health and environmental protection regulations, ensuring in particular that all potentially hazardous parts be made harmless, especially in relation to children who could play with unused appliances.
• The various components of the appliance are recyclable. Dispose of them in accordance with the regulations in force in your country. If the appliance is to be scrapped, remove the power cord.
• After use, ensure that the knobs are in the off position.
• Children less than 8 years of age shall be kept away unless continuously supervised.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance. Clea -ning and user maintenance shall not be made by children without super-vision.
• The manufacturer declines all liability for injury to persons or damage to property caused by incorrect or improper use of the appliance.
• WARNING: During use the appliance and its accessible parts become hot; they remain hot for some time after use.
• Care should be taken to avoid touching heating elements on the hob. To avoid burns and scalds, young children should be kept away.
• WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover the flame e.g. with a lid or a fire blanket.
• WARNING: Danger of fire: do not store items on cooking surfaces.
• WARNING: When correctly installed, your product meets all safety requirements laid down for this type of product category. However special care should be taken around the underneath of the appliance as this area is not designed or intended to be touched and may contain sharp or rough edges, that may cause injury.
• CAUTION: The cooking process has to be supervised. A short-term cooking process has to be supervised continuously.
• This appliance is not connected to a combustion evacuation device. It shall be installed and connected in accordance with current installation regulations. Particular attention shall be given to the relevant requirements regarding ventilation. · Warning the user against the use of cooking vessels on the hotplate that overlaps its edges.

FEATURES AND TECHNICAL DATA

Model: HIC-654CF-S

1. Bottom
2. Rubber leg
3.  Nozzle
4. Pan Support
5. Burner
6. /7/8/9 Knob
7. Tempered Glass Surface

GAS BURNERS

a. 90mm
b. 70mm
c. 90mm
d. 70mm| m 2.0Kw
m 1.5Kw
m 2.0Kw
m 1.5Kw| Single Burner
Single Burner
Single Burner
Single Burner
---|---|---

CONTROLS DESCRIPTION
6. Burner control knob (a. 90mm burner)
7. Burner control knob (b. 70mm burner)
8. Burner control knob (c. 90mm burner)
9. Butner control knob (d. 70mm burner)

CAUTION:
Gas hobs produce heat and humidity in the environment in which they are used. Ensure that the cooking area is well ventilated by opening the natural ventilation grilles or by installing an extractor hood connected to an outlet duct.
CAUTION:
If the hob is used for a prolonged time it may be necessary to provide further ventilation by opening a window or by increasing the suction power of the extractor hood(if fitted

HOW TO USE THE COOKTOP

GAS BURNERS
Gas flow to the burners is adjusted by turning the knobs(illustrated in fig. 2.1) Turning the knob, so that the indicator line points to the symbols printed on the panel, achieves the folowing functions:  -symbol  OFF closed valve
-symbol ON maximum aperture or flow
-symbol minimum aperture or flow

• The maximum aperture position permits rapid boiling of liquids, whereas the minimum aperture position allows slower warming of food or maintaining boiling conditions of liquids.
• To reduce the gas flow to a minimum, rotate the knob further anticlockwise to point the indicator towards the small flame symbol.
• Caution! Do not cover the hob with aluminum foils.
• Other operating adjustments can be achieved by positioning the indicator between the maximum and minimum aperture positions, and never between the maximum aperture and closed positions.

IMPORTANT: To turn the control knob from the closed position “ ” to the maximum aperture position “ ”, first press in the knob and then turn it anti- clockwise.

N.B. When the cook top is not being used, set the gas knobs to their closed positions and also close the cock valve on the gas bottle or the main gas supply line.
Caution!
The cooking hob becomes very hot during operation. Keep children well out of reach.

INSTALLING THE BATTERY

Firstly, install two pcs of No. 5 batteries in the battery box at the bottom of the gas hob, and then perform the ignition and fire size adjustment according to the order of illustration.(illustrated in fig. 2.3)

LIGHTING THE BURNERS

To ignite the burner, the following instructions are to be followed

1. Press in the corresponding knob and turn counter-clockwise(Fig. 2.3) to the full flame position marked by the “ ” symbol (Fig. 2.1) ; hold the knob in until the flame has been lit. In the case of the main failure, light the burner with a match or lighted taper.
2. Wait for a few seconds after the gas burner has been lit before letting go of the knob (valve activation delay).
3. Adjust the gas valve to the desired position.

CHOICE OF THE BURNER
The suitable burner must be chosen according to the diameter and the capacity used. As an indication, the burners and the pots must be used in the following way:

DIAMETERS OF PANS WHICH MAY BE USED ON THE BURNERS
BURNERS…………….70mm and 90mmBurner
MINIMUM………… 6cm
MAXIMUM…… 22cm
do not use pans with concave or convex bases
It is important that the diameter of the pot be suitable to the potentiality of the burner so as not to compromise the high output of the burners and therefore energy waste.
A small pot on a large burner does not give you a boiling point in a shorter amount of time since the capacity of heat absorption of a liquid mass depends on the volume and the surface of the pot.

CLEANING AND MAINTENANCE

GENERAL ADVICE

• Before you begin cleaning, you must ensure that the appliance is switched off and disconnected from the electrical power supply.
• Important: The use of suitable protective clothing/gloves is recommended when handling or cleaning of this appliance.
• Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualified personnel.
• It is advisable to clean when the appliance is cold and especially when cleaning the enameled parts.
• Be very careful that no water penetrates inside the appliance.
• Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc.) on the surfaces.
• Avoid using cleaning products with a chlorine or acidic base.
• Do not use a steam cleaner because the moisture can get into the appliance thus making it unsafe.
• Important: The manufacturer declines all liability for possible damage caused by the use of unsuitable products to clean the appliance.

WARNING! When correctly installed, your product meets all safety require elements laid down for this type of product category. However special care should be taken around the underneath of the appliance as this area is not designed or intended to be touched and may contain sharp or rough edges, that may cause injury
ENAMELLED SURFACES
All the enameled parts must be cleaned with a sponge and soapy water only or other non-abrasive products. Dry preferably with a microfibre or soft cloth.If acid substances such as lemon juice, tomato conservation, vinegar, etc. are left in the enamel for a long time they will etch it, making it opaque.
STAINLESS STEEL SURFACES
Stainless steel parts must be rinsed with water and dried with soft and clean doh. For persistent dirt, use specific non-abrasive products available commercially or a little hot vinegar.
PAINTED PARTS AND SILKSCREEN PRINTED SURFACES
Clean using an appropriate product. Always dry thoroughly.
IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abrasion.
You are advised to use a soft cloth and neutral soap.
CAUTION: Do not use abrasive substances or non-neutral detergents
as these will irreparably damage the surface.
GAS TAPS

• In the event of operating faults in the gas taps, call the Service Department.

BURNERS

• These parts can be removed and cleaned with appropriate products.
• After cleaning, the burners and their flame spreaders must be well dried and correctly replaced.
• It’s very important to do so can check that the burner flame spreader and the burner have been correctly positioned. Failure to do so can cause serious problems.
• Check that the electrode/s next to each burner is/are always clean to ensure trouble-free sparking.

Both the probe and ignition plug must be very carefully cleaned. Note: To avoid damage to the pulse ignition do not use it when the burners are not in place.

INSTALLATION

1. NOTE:

• Confirm that you have the right model for your type of gas supply;
• When unpacking, make sure that all of the parts of the gas hob are included.
• CHOOSING THE SUITABLE SURROUNDINGS

-When choosing a place to put the gas hob, be sure to pick a spot that is firm and level. Be sure to provide a heat insulation board.
-Keep paper, oil, and all other inflammable objects away from the gas hob.
-Leave at least a 500mm distance between the gas hob and the gas bottle.
-Gas hob must always dispose of their combustion fumes through hoods connected to flues, chimneys or straight outdoor.
-If it is not possible to install a hood, an electric fan can be installed on a window or on an external wall in compliance with the provisions in force.

VENTILATION REQUIREMENTS
It is essential that the room in which the appliance is installed is permanently ventilated for the efficient operation of the appliance and the safety of the users.

HOB INSTALLATION

Check that the hob is in good condition after having removed the packages. Never leave packaging materials (cardboard, bags, polyfoam, etc.) within children’s reach since they could become potential sources of danger.
GAS CONNECTION
This is a LOW-PRESSURE APPLIANCE and should only be used with a LOW-PRESSURE REGULATOR (2.8kPa). Use an approved gas hose and always secure the hose with a hose clamp. The method of installation and gas supply must be in compliance with the Local Authorized Regulations of the area where the hob is being installed.
BATTERY IGNITION
Press and turn the knob corresponding to the required burner anti-clockwise till it reaches the full flame position ON. You may hear a ticking sound from the electronic igniter. The burner will be lit in a few seconds. Matches can be used to light the hob in the event of power failure.

GAS SECTION

SOFT PIPE CONNECTION

• Please use a soft pipe connector (see picture 1), and a special gas pipe to connect.
• The hose must be inserted into the red mark of the soft pipe and fixed with a clamp. The length of the pipe should be less than 150cm.
• When the hose is connected with the soft pipe connector, please do not let the air inlet pipe touch any part of the hob or be placed under the hob. Make suer the pipe is not pressed, twisted, or bent by other objects.
• When assembled, please avoid the soft pipe from any force, otherwise, the connector will be damaged. If damage is found during assembling, please stop and contact your local dealer.
• Please change the soft pipe every year.

WARNING:
PLEASE DO NOT USE A HOSE WITH POOR QUALITY OR OLE IN CASE OF GAS LEAKAGE, POISONING, OR FIRE HAZARD.

HARD PIPE CONNECTION

• For a gas hob designed to use a spiral connector(see picture 2), please use spiral connect. It can also be connected with a hard pipe or metal soft pipe.
• Please use a sealing pad when connecting, twist it tight with a spanner, and hold the hexagonal nut of the connector. Avoid damage to the hob.
• If you need to assemble a soft pipe connector with the spiral one, please follow the indication of the hard pipe connecting method, and avoid damage to the connector and
  plastic pad.

SAFETY MEASURES

• Do not use a gas other than what is specified on the label attached.
• Use for cooking only. Do not cover it with towels, clothes, etc.
• Do not place the gas hob in a location where the flame may be easily blown off by the wind.
• Make sure that there are no inflammable materials near the gas hob.
• Check from time to time, whether the burners work normally.
• After use, turn the knobs back to the OFF position and make sure the burners stop working.
• Ensure that the cock valve is closed when replacing the gas bottle.
• It is safer to close the cock valve when the hob is not being used.
•  Don’t touch the top panel of the gas hob during cooking, as it gets very hot near the burners when in use.
• Ventilation is essential for the efficiency of the appliance and the s safety of the users. Make sure the kitchen is well ventilated.
• Make sure the room is well-ventilated.Never use the gas hob for over 10 minutes in a small room or in a closed space without a fan or opening the window.
• If gas leakage happens, close the main cock valve, open all the windows, and call your local dealer.
• The gas cock valve should be kept in a distance of more than 0.5m from the gas hob .

TROUBLE-SHOOTING GUIDE

The gas hose is filled with air or clogged
Electrical ignition does not work Power Off
Lighter is oxidized or damaged Burner, flame circle or the burner cap is not in its correct position Flame ports are clogged. Open it| Replace gas cylinder
Clean them
Check whether the battery is exhausted or not.
Manual Ignition light with a match
Clean it using gauze or replace it Place it right position
clean them
Combustion is abnormal| Lack of gas supply
Flame ports are clogged
The burner is not in its correct position| Replace gas cylinders Clean them
Place it right position
Small I of gas| Gas leak from pipe Rubber hose is damaged| Examine the pipe using soap water, and replace it.
• Replace it
The flame goes out while releasing the knob| the flame failure safety valve has not been activated| ‘ hold the knob pressed
for a longer period
refer the unit to your dealer
Gas burns back onto the jet| | Turn off the gas and relight.
If the problem persists refer the unit to your dealer

HAIER WARRANTY
HAIER APPLIANCES (INDIA) PVT.LTD.(here-in. after referred to as “theCompany”) hereby off res the following warranty to the original domestic purchaser commencing from the date of the Purchase (DOP). The Company at its sole discretion, will free of charge repair or replace any defective part or parts which prove to be defective in workmanship and/or materials and not due to abnormal or improper usage
CONDITIONS OF WARRANTY

1. This warranty will be automatically terminated on the expiry of the warranty period from the Date of Purchase (DOP).

2. The Company is not liable for any delay in servicing due to reasons beyond the control of the Company or any of its authorized service centers.

3. Parts replaced or repaired under this warranty are warranted throughout the remaining of the original warranty period.

4. It is entirely left to the Company’s discretion to repair/replace parts at the site of installation or at the authorized service center.

5. This warranty shall be strictly limited to the repairs or replacement of the defective part specified in the warranty. This warranty shall not cover any consequential or resulting liability.

6. This warranty shall not, in any case, extend towards payment of any monetary consideration whatsoever or replacement or return of the product.

7. The Company may repair/supply parts free of cost during the warranty period. This warranty does not cover any Excise duty, Central or Sales tax, Octroi and other local taxes or levies on the components/parts.

8. The parts shall be replaced by functionally operating equivalent material only and not with brand new ones and are likely to be different from the one originally fitted. The parts thus removed shall be taken back by the Company.

9. The Company reserves the right to retain any part or component replaced at its sole discretion during the warranty period.

10. In no event, the Company or its authorized service center, be liable for any consequential damages or resulting liability, damage, or loss arising directly or indirectly out of any defect in the product.

11. This warranty is not valid in case of the following events.
    a) If the Product has been Installed/Serviced/Repaired/Opened or Tampered by any unauthorized personnel.
    b) If defects arise/are caused by accidents, alteration, misuse, neglect, the substitution of original components with spurious/non-genuine components, attacked by household pest/rodents, fire, flood, earthquake, lightning, and/or any other act of God/natural calamities.
    c) The product is shifted outside India.

12. (a) For any service under this warranty beyond city/town/municipal limits from the Company/authorized service center, a fixed charge of Rs. 100 will be collected from the customer in addition to the actual to and for charges by the shortest route.
    (b) Service charges applicable after the expiry of a comprehensive warranty.

13. Any change of location or change in the ownership during the warranty period must be intimated in writing to the Company.

14. The Company’s employees or its authorized representatives have no authority to vary the terms of this warranty

15. Brass burners valve carry a warranty against any manufacturing defect for 60 months. Warranty is not applicable for De-coloration of the burners.

16. The warranty does not cover rust, oxidation, discoloration, scratches, and wear & tear, plastic, rubber, aesthetics, filters, or Consumable parts.

17. HOB Tempered glass tops have 24 Month warranty for any manufacturing defect. The warrant of glass becomes null & void In the following conditions.
    a) Glass breakage due to improper use or accidental damage.
    b) Use of gas tandoor / Gas Oven / Dosa Tawa.
    c) Sprinkling of water on the hot glass surface.
    d) Other safety norms/precautions not followed.

18. This warranty is affected in New Delhi and claims if any, shall be made only before the courts having jurisdiction in New Delhi and no claim shall be made against the Company outside New Delhi notwithstanding that the Appliance may have been sold or delivered elsewhere.

(1 + 1 Yr. on Glass) &
(1 + 4 Yrs. On Burner & Valve )| Pan Support, Leg, Drip Tray & Knob, Mixing tube, Plastic Parts, accidents or damage, etc.
HYBRID – HOB
TABLET – HOB
HOOD| 1 Year Comprehensive| Glass, Duct Cover, Body, Filters, Oil Collector & Cleaning, Bulbs, Switches, Knobs, Plastic Parts, accidents or damage,
etc.
BUILT – TWO| 1 Year Comprehensive| Outer Body, Cavity, Door, Glass, Handle, Knob/ Touch Panel, bulbs, Plastic Parts, accidents or damage, etc.
BUILT – IN – OVEN| 1 Year Comprehensive
BUILT – STERILIZER| 1 Year Comprehensive

Haler Appliances (India) Pvt. Ltd.
Building -1, Okhla Industrial
Estate Phase III, New Delhi -110020
Tel- +91-1139496000,30674000,
Fax: +91-11-30674088

1800-102-9999, 1800-419-9999 (Toll Free – 24×7)
Email: customercare@haierindia.com
Whatsapp : 855 304 9999
For Quick Connect to Haler India Scan QR Code

https://wa.me/918553049999
Customer Name Address:-……………………………….
Serial Number:-………………………….
Date of Purchase:-……………………………………
Model No. :-………………………………..
Dealer Seal:-………………………………..

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>