Shenzhen Qichen Lighting YK-FWD-W-2P-B LED Floor Lamp Instruction Manual
- June 6, 2024
- Shenzhen Qichen Lighting
Table of Contents
Shenzhen Qichen Lighting YK-FWD-W-2P-B LED Floor Lamp
Product Parameters
- Size: 57. 5x17x17 Inch
- Input Voltage: AC100-240V 50/60Hz
- Output Voltage: DC12V
- Power: 20W
- Remote Distance: 5-8M
- Working Temperature: -2045C
- Beam Angle: 120°
Safety Instructions
- Please read the instruction manual before using the lamp
- To ensure the longer 1ife, please do not use near heat, corrosive or damp place
- Before using the lamp, please check if the lamp is damaged during transport. If the lamp has shown any damage, do not use or install the 1amp
- Unplug adapter when the lamp will not be used.
- Before cleaning, make sure that the lamp is disconnected from the power supply.
- Clean only with a soft dry cloth and do not use solvents or cleaning solutions.
- if any problem when you install, send us email at: serviceledéhotnail.com
Assembly instructions
Step1:
Insert the bracket into the lamp body
Step2:
Fix the bracket with screws
Step3:
Plugin the connector and turn on the power
Remote Control Mode
APP Mode
Search “duoCo Str ipk” at App Store and install the APP, Please kindly NOITE:: The APP Name Is duolo StripX, Not due to Strip, This APP program requires that the minimum systems of your phones is Andriod 4. 3 or i05 8. 0. lo limit for mobile phone configuration. you can download APP by Scanning 4R codes on i0S or Android systems. use apps with scanning functions such as a browser to Scan the QR code.
Functions are listed as follows:
- 1. Adjust the brightness and color temperature of d0, U00 kinds of colors for both colorful LED strips and monochrome LED strips;
- There are 213 style modes, that keep the one solid color or make color change automatically and would keep changing even the phone is disconnected with the strip lights.
- In the music mode, the colors of strip lights change automatically according to with the music rhythm, which is absolutely beautiful. If the phone system is Android, this app will automatically sync the songs that have been downloaded in your mobile phone. If the phone system is i05, you need to connect your mobile phone to the computer and import the songs from the computer to your mobile phone. then the app will automatically syncs the songs you have imported
- In the Mic mode, colors ad. adjusting automatically based on the ambient sound, and the phone Mic or external Nic can be chosen.
- Be your light “Alarm clock”, the LED strip lights have a timing function. you can preset the time to turn on/off your LED strips. then it turns on or off automatically on time every day.
- Long-distance control without direction restriction and multiple controls is allowed.
- LED strip lights have a memory function. when the strips are used again, they remenber the last mode settings without having to repeat the settings.
- Once been connected, your phone WOuld connect to the light strips automatically after you turn on your Bluetooth.
due to StripX APP
When your device can’t connect the lights automatically, follow the steps
below Android< <<<<<<<<<<<<<<<<<<< Method 1: Click My Devices to refresh (on
the top left corner), then it shows connected successfully.
Method 2:If the first step fails, you need to exit the app and close its
process 1n the background completely, then open it again. Method 3:If all
steps fail, you need to exit the app and close its process in the background
completely, turn ott the Bluetooth, then turn on the Bluetooth, and open the
app again. IOS< <<<<<<<<<<<<<<<<<<<<< Method 1:Exit the app, close its process
in the background, and then open the app again. 
Device Operation Interface
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
the manufacturer could void your authority to operate this equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.