SONY MDR-DS6500 Digital Wireless 3D Surround Headphones Owner’s Manual

SONY MDR-DS6500 Digital Wireless 3D Surround Headphones

MDR-DS6500 is composed of the following models

SPECIFICATIONS

SECTION 1 DISASSEMBLY

• This set can be disassembled in the order shown below.

Note: Follow the disassembly procedure in the numerical order given.

FRONT R SUB ASSY PLATE

RX MAINBOARD

Note: When the complete RX MAIN board on wireless stereo headphones (MDR- RF6500) is replaced, the pairing is necessary. Refer to “ABOUT PAIRING WHEN REPLACING THE BOARDS” on page 3.

FRONT L SUB ASSY PLATE

RX POWER BOARD

UPPER CABINET

TX TERMINAL BOARD, TX MAINBOARD

Note: When the complete TX MAIN board on the processor (DP-RF6500) is replaced, the pairing is necessary. Refer to “ABOUT PAIRING WHEN REPLACING THE BOARDS” on page 3.

SECTION 3 EXPLODED VIEWS

Note:

• Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
• The mechanical parts with no reference number in the exploded views are not supplied.
• Color Indication of Appearance Parts Example:
  KNOB, BALANCE (WHITE) . . . (RED)
  Parts Color Cabinet’s Color

HOUSING (L) SECTION

HOUSING (R) SECTION, HEADBAND SECTION

PROCESSOR SECTION (1)

PROCESSOR SECTION (2)

Documents / Resources

| SONY MDR-DS6500 Digital Wireless 3D Surround Headphones [pdf] Owner's Manual
MDR-DS6500, DP-RF6500, MDR-RF6500, Digital Wireless 3D Surround Headphones
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>