THROWBACK TB-RET2 Bluetooth Speaker Instruction Manual
- June 12, 2024
- THROWBACK
Table of Contents
Bluetooth Speaker
Operation Manual TB-RET2
PRODUCT OPERATION
PAKCAGE CONTENTS
lx Retro Speaker
lx Micro Charge Cable
lx Manual
GENERAL OPERATION
Location of controls:
- ON/OFF Switch
- Operation mode change bottom
- quicky press to replay the previous track
- quicky press to play/pause
- quicky press to skip to the next track
- AUX input port
- USB input port
- Charging indicator
- DC SV charging port
- M radio station knob
- Volume button
- Mode indicator light
Bluetooth Connection:
-
Set the ON/OFF button to the ON position.
The blue LED light will signal the BlueTooth mode with flashing lights -
Turn on the Bluetooth function on your mobile device and search for the “TB-RET2;”
-
Charging indicator light will be on when charging , and will be off once fully charged
Note: If a previously connected device comes within range of unit, the unit
will connect to that device automatically.
Charging the Retro Radio Speaker:
Plug the pin of the Micro USB charging cable in to the micro USB socket on the
back side of the speaker. Plug the other end into a USB Port on you compute Or
any other device allowing USB charging It will shut off when the battery is
fully charged.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1} This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or mare
of the following measures:
–Reorient or relocate the receiving antenna
–Increase the separation between the equipment and receiver
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
THROWBACK©COPYRIGHT ALL RIGHT S RESERVED
THROWBACK is an in novative company of Truststone Group LLC. No portion of
this design may be reproduced without express written permission. Other
trademarks and trade names are those of their respective owners. All rights
reserved. Distributed by Truststone Group LLC
New York Ny 10003
GENERAL SPECIFICATIONS
Rated output power: RMS:3W
Input: DC 5V 1 A
Model: TB-RET2
Battery: 3.7V/l 500mAh
Loudspeaker: 78mm 2Ω5W
FCC ID: 2BBPLIBREl2
MADE IN CHINA