HARMAN 012463 Storage Box for ATV Instruction Manual
- June 6, 2024
- Harman
Table of Contents
012463 Storage Box for ATV
Instruction Manual
STORAGE BOX FOR ATV
Important! Read the user instructions carefully before use. Save them for
future reference. (Translation of the original instructions).
Jula reserves the right to make changes.
For the latest version of operating instructions, see
www.jula.com
SAFETY INSTRUCTIONS
- Do not exceed the permitted load for the vehicle’s load carrier when loading the storage box.
- Distribute the load as uniformly as possible.
- Put heavy objects in the front of the box.
SYMBOLS
| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
TECHNICAL DATA
| Size | 880 x 550 x 370 mm |
|---|---|
| Volume | 901 |
| Weight | 10 kg |
ASSEMBLY
The product is intended for mounting on an ATV with a tubular carrier. The size and type of carriers vary depending on manufacture and vehicle size. Choose a positioning that best suits your vehicle.
-
Put the product on the rear carrier of the vehicle. The product should be centered on the carrier.
-
Choose four suitable attachment points to lock the product in place on the carrier.
If possible two of the U-bolts should be placed on the lengthwise tubes on the carrier and two on the transverse tubes. -
Mark out on the underside of the product along each tube used for the mounting.
Remove the product from the carrier and put it upside down on a flat surface. Place a lock plate centered over each marked line to mark out the holes for the
U-bolts. Drill holes at the markings with an 8 mm drill. -
Put the U-bolts under the tubes in the carrier and put the product over the carrier. Align the drilled holes to the U-bolts at each attachment point. Fit each U-bolt through the base of the product and lock in place with a lock plate and two locknuts. Each U-bolt must be locked with one of the supplied lock plates.
Do not use washers or other components.
Tighten the U-bolts alternately until the product rests firmly and evenly on the carrier.
NOTE:
Do not overtighten the nuts.
JULA AB, BOX 363, SE-532 24 SKARA
2022-03-16
© Jula AB
Documents / Resources
|
HARMAN 012463 Storage Box for
ATV
[pdf] Instruction Manual
012463, Storage Box for ATV, 012463 Storage Box for ATV, 220316
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>