EverFlourish EW26-2UL1 Smart Plug User Manual
- June 6, 2024
- EverFlourish
Table of Contents
EW26-2UL1 Smart Plug
User Manual
Function
- This smart plug could be controlled via smartphone and smart tablet.（Fig 1）
- Some functions could be also controlled manually through the button. (Fig 2)
|
---|---
Button Control instruction
How to control it manually?
- On/Off： Press the button to control the power On or Off manually whatever this plug is online or offline status.
- Add the device through TUYA “Smart Life” App: Press the button for more than 5 seconds to make the indicator blink.
- Indicator conditions:
Blink: Wait for Wi-Fi connection through “Smart Life”;
Continuous light: Power On.
Extinguished: Power Off.
Power connection
- Make sure all electrical appliances are powered off before connecting to the power socket.
- Plug into a power socket.
Parameters:
- AC 125V~ 60Hz
- 1875W (resistive), 10A Tungsten , Motor Load 1/2HP
- WIFI :2.4GHz, IEEE 802.11/b/g/n
Manufacturer:
Manufacturer: Ningbo EverFlourish Smart Technology Corp., Ltd.
Address: 77 Wuxiang East Road, Yinzhou, Ningbo, 315111, P.R.China
This device complies with Part 15 of the FCC. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution:
This device complies with Part 15 of the FCC Rules / Innovation, Science and
Economic Development Canada’s license-exempt RSS(s). Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference. (2) this device must accept any interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
MPE Reminding
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm
or more should be aintained between the antenna of this device and persons
during device operation.
To ensure compliance, operations at closer to this distance are not
recommended.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>