JAYS s-Living Flex MultiRoom WiFi Speaker User Manual

s-Living Flex MultiRoom WiFi Speaker
User Manual

Thank You!
Welcome to the new world of JAYS!
Designed and developed with elegance and simplicity as key factors by our Scandinavian team.
Our s-Living Flex is a wireless speaker using the latest Wi-Fi streaming technology so that music can be enjoyed in many different settings.
We are excited to present our new speaker and hope you will enjoy the divine sound performance.

Enjoy,
Henrik Andersson
CEO, JAYS

USING YOUR SPEAKER

Touch panel control – see next page for image reference

1. Long press the on/off button to turn on/off your s-Living Flex.
2. A single tap on the PAUSE/PLAY button on the left to PAUSE/PLAY. Long press to switch between Wi-Fi, Bluetooth and AUX.
3. Press + or – to adjust the volume.
4. When in Wi-Fi mode, long press 3 to 6 seconds to enter WAC mode. When in Bluetooth mode, long press 3 to 6 seconds to enter Bluetooth pairing. Long press 6+ seconds to reset your speaker.

USING YOUR SPEAKER

FIRE UP YOUR s-Living Flex

How to start

1. Connect power to your speaker. Use included power adapter for s-Living Flex and connect to a power outlet.
2. Press the power button for 3 seconds to power ON the speaker and it will boot up, which takes up to a minute. If you need to powerless 3 seconds again.
3.  Once you hear a voice message from the speaker, you are ready to continue.

The speaker modes

When the speaker is powered ON and ready, you can switch between different modes. Long press the PLAY/PAUSE button to switch mode.
You can choose:

• Wi-Fi mode

| System LED will show PURPLE color (this is the default mode)
---|---

• Bluetooth mode

| System LED will show BLUE color

• AUX-In mode

| System LED will show a GREEN color

Using your speaker with battery

You may use your speaker for about 6 hours in playback mode. After that, you will need to connect it to the included power outlet. The speaker will automatically enter standby mode if no music is played for 10 mins. If in standby mode for 60 minutes the s-Living Flex will switch off in order to not drain your battery. If using your speaker in AUX mode, the speaker will not enter standby mode automatically. When the battery is low, LED will turn yellow. As you recharge the battery, the LED will breathe yellow. When it is fully charged again, the LED will go back to its mode color.
Note
Wi-Fi mode operation requires the speaker to be connected to a Wi-Fi network. And this is also needed if you want to use Wi-Fi features such as Google Cast, AirPlay or Spotify Connect. Furthermore, the speaker is compatible with voice assistants from Google and Apple (Google Assistant and Siri) if the speaker is also “paired” with Google  Home and/or Apple Home (Apple HomeKit). The speaker DO NOT have the voice assistant function built indirectly.

Important note

If LED’s shortly after power ON is flashing RED, or if you suddenly notice LED’s flashing RED, then DO NOT remove the power plug. This means that the speaker is installing automatic software updates.

LED INDICATIONS AND START-UP

Power on
During startup (power ON the speaker) the power LED will flash fast.
Note: When you power ON the speaker it will always start up in Wi-Fi mode.
Search state
When the speaker is powered ON it will start by being in a “search state” trying to search for and connect to the last Wi-Fi network. During this state, the LED will flash. The same will happen (flash) if the speaker is put into “Bluetooth mode”, where you are now able to establish a connection with a previously paired Bluetooth device.
Setup mode or pairing mode
In “Wi-Fi mode” the speaker will automatically enter the “setup mode” within 20 seconds if the speaker during “search state” does not successfully re- connect to the previous Wi-Fi network.
In “setup mode” the LED will flash continuously. The same LED behavior will occur if the speaker is set into “Bluetooth pairing mode”.
Playback state
During playback, the LED will be ON (solid) and the color of the system LED (Purple, Blue, Green) will indicate what “mode” the speaker is in (Wi-Fi playback, Bluetooth playback, AUX playback).
Idle mode/network standby mode (sleep mode)
LED will be breathing slowly indicating “no action” or “I am sleeping”.
“Idle mode” will happen as soon as music is paused (no action).
“Standby mode” will happen if there is no action for 20 mins when plugged in and 10 mins when not plugged in. If in standby mode for 60 mins the s-Living Flex will switch off. To switch on long-press ON for three seconds.

LED INDICATIONS AND STARTUP

SETUP MODE

Setting up your speaker

“Wi-Fi setup mode” or “Bluetooth pairing mode” is needed for either connecting the speaker to a Wi-Fi network or connecting a new Bluetooth device to the speaker.

• For “Wi-Fi setup”, the speaker will automatically enter “setup mode” if the previous connection cannot be established. But even though the speaker is already connected to a Wi-Fi network you can manually force this “mode” by pressing the “pairing button” (Wi-Fi symbol) for 3 seconds. Note: The speaker must be in “Wi-Fi mode” first. Forcing this setup mode will only enable Apple setup mode (WAC).
• For “Bluetooth pairing mode” (if you need to pair a new Bluetooth device with your speaker), you need to press the “pairing button” (Wi-Fi symbol) for 3 seconds. Note: The speaker must be in “Bluetooth mode” first.

Reset speaker / disable wireless connections: The speaker can be reset to factory defaults by pressing and holding the “pairing button” (Wi-Fi symbol) for 6 seconds. This will clear all speaker settings and afterward it will be ready for Wi-Fi setup again. A reset will also disable all wireless connections.

VOICE MESSAGES

Voice messages from your speaker

WAITING FOR CONNECTION| If you hear this message, the speaker is either in “Wi-Fi setup mode” waiting for a Wi-Fi connection to be set up or the speaker is in “Bluetooth mode” waiting for previously paired devices to connect.
---|---
CONNECTION SUCCESSFUL, TIME TO PLAY| If you hear this message, the speaker is successfully connected to a Wi-Fi network or you have successfully re- connected a previously paired Bluetooth device. You are now ready to play music.

CONNECT TO WI-FI OR BLUETOOTH PAIRING

Wi-Fi setup
There are two methods of connecting your speaker to a Wi-Fi network, while the speaker is in “Wi-Fi setup mode”. In either case, you need to follow the Google or Apple setup methods, and you must be within close range of your speaker while doing so.
Note: The speaker will reply “Connection Successful, Time To Play” once the connection is ready.
Using the Google Home App
You need to download and install the Google Home App on any of your compatible devices (e.g. smartphone or tablet). Your device must be connected to the same Wi-Fi network of which you want the speaker(s) to be connected. Open the Google Home app and follow the on-screen guidelines for setting up a new device (in this case, connecting your speaker).
Note: For more information about using Google Home App and setting up your speaker to Google Home, and to Wi-Fi networks through the Google Home App, please refer to Google’s website.
Using Apple setup methods

1. (WAC setup) Open Wi-Fi settings on your iOS device. On the “Choose a network…” list, you will find your speaker listed with the headline “Set up new AirPlay speaker”. Follow these steps and your speaker will connect to the Wi-Fi network.
2. Download and install the Apple Home App to set up the speaker to your Wi-Fi and the Apple HomeKit universe. Please refer to Apple’s
   website for using the Apple Home App.

Bluetooth pairing
Set your speaker into “Bluetooth pairing mode” and open the Bluetooth settings screen on your device. The speaker will appear on the list, simply choose it to pair it to your device. The speaker’s “pairing mode” is only active for 2 minutes.
Note: The speaker will reply “connection successful, time to play” when your device is successfully paired to the speaker.

USING YOUR SPEAKER FOR PLAYBACK

Wi-Fi playback
With the speaker connected to a Wi-Fi network you can use any of the following streaming technologies for playback:

Apple AirPlay: Requires an Apple device. Please refer to Apple’s website about using AirPlay. Please note that iOS 11.4 or later is required.

Chromecast Built-In: This is supported by many devices and apps including, but not limited to, Android devices. Many apps support Google Cast and some TVs have Google Cast built-in. Please refer to Google’s website for information about using Google Cast.

Spotify Connect: Supported in the Spotify App only, but on multiple platforms.
Ready to play some music?
Listen to your speakers or TV, using the Spotify app as a remote.
Learn More: https://www.spotify.com/int/connect/
Bluetooth playback
Switch to “Bluetooth mode” first (System LED will turn blue). Then make sure your device has established a Bluetooth connection to the speaker. Now you are ready to play music.
AUX playback
Simply switch the speaker to “AUX mode” (System LED will turn green) and connect a device to the AUX input on the back of the speaker.
Note: Remember that in this mode you can control the volume on your device as well as on the speaker.

SAFETY INFORMATION & STATEMENTS

Safety

• Only use a compatible power source to power the speaker.
• Damages caused by severe heat will risk voiding your warranty.
• Never try to open or repair your JAYS s-Living Flex. It will void the warranty and you will risk personal injury. Risk of electric shock.
• Always place your s-Living Flex on a flat and stable surface. Failure to do so will increase the risk of the speaker falling, hence getting damaged or you might get a personal injury.
• Warning. This product contains magnets that might be harmful to pacemaker wearers.
• Always disconnect your speaker from power before cleaning. Do not use any liquids and chemicals when cleaning.

Statements

EU Declaration of conformity

Hereby Northbaze Distribution AB declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other EU directive requirements. The complete declaration of conformity can be found at www.jaysheadphones.com.

Caution

Risk of explosions if a battery box is damaged or opened. Dispose of used batteries according to your local waste disposal authority.

FCC Rules

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Please take attention that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

RSS standards

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

LEGAL & WARRANTY

Environmental information
This product complies with international directives, including but not limited to WEEE Directive (2012/19/EU).
Do not dispose of normal household waste. Please consult your local waste disposal authority for guidance on how to properly recycle or dispose of this product.
Manufacturer’s limited warranty
Your original Northbaze Distribution AB product is covered by a warranty of twelve (12) months from the date of purchase of a brand new, unused Northbaze Distribution AB product by the original purchaser. Northbaze Distribution AB guarantees that the product is free from faults in the materials, design and workmanship when it was sold to the purchaser. If you are not able to submit the receipt when making a warranty claim you may be obliged to pay for any repairs carried out. Proof of purchase must clearly state the date of purchase, name of the product, and authorized resellers’ details.
The Warranty Period cannot be extended or renewed due to subsequent resale or replacement of the product. This Limited Warranty does not affect your legal rights under your applicable national laws relating to the sale of consumer electronic products. Defective parts replaced within the Limited Warranty Claim shall become the property of  Northbaze Distribution AB.
What is not covered by the limited warranty?

• Faults caused by wear and tear, age-related battery capacity loss, accidents, dropping, mechanical damage, chemical products, abnormal impact damage, or force majeure.
• Modifications or repairs performed by yourself or a third party without Northbaze Distribution AB approval.
• The s-Living FLEX is IPX4 rated. This means it is resistant to splashes of water. The speaker is not waterproof meaning it may not be submerged in water.

How to get warranty service
If you wish to make a Warranty Claim within the Limited Warranty Period, please contact the reseller of your product for further help. You will need to provide the proof of purchase and the affected part. Any defective parts covered by the Limited Warranty will be repaired or replaced free of charge. Replaced or repaired parts provided during the Warranty Period will be warranted for the remainder of the original Warranty Period or for sixty (60) days from the date of repair or replacement, whichever is longer. For FAQ please visit www.jaysheadphones.com.

APPENDIX

Chromecast is a trademark of Google LLC.

The Spotify Software is subject to third-party licenses found here: www.spotify.com/connect/third-party-licenses.

Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards.
Apple, iPad, iPad Air, iPad Pro, iPhone, and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries.
To control this AirPlay 2-enabled speaker, iOS 11.4 or later is required.

s-Living Flex
Getting started, safety and warranty
User Guide Rev. 1.0 for
JAYS s-Living Flex Wi-Fi multiroom speaker
We accept no liability for printing errors
Specifications are subject to change without notice – JAYS 2021
www.jaysheadphones.com

References

• Wireless Headphones and Speakers – JAYS Headphones
• Wireless Headphones and Speakers – JAYS Headphones
• Third Party Licenses | Spotify for Developers
• Explore - Spotify | Connect at home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>