GIGABYTEAORUS AORUS FO32U2P Gaming OLED Monitor Owner’s Manual

GAMING MONITOR
USER GUIDE
AORUS FO32U2P / AORUS FO32U2 / AORUS FO27Q3

AORUS FO32U2P Gaming OLED Monitor

Copyright
© 2024 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice.
No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE’s prior written permission.

• In order to assist in the use of this monitor, carefully read the User Guide.
• For more information, check on our website at: https://www.gigabyte.com

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

INTRODUCTION

Package Contents
The following items come with your packaging box. If any of them is missing, please contact your local dealer.

Note:
Please keep the packaging box and packing materials for possible transportation of the monitor.

Peeling off the Screen Protective Film Using the Peel Tab
Instructions on Using the Peel Tab:

1. The peel tab is located as indicated by the red arrow in the picture below.
2. Remove the screen protective film in the direction indicated by the red arrow in the picture below.
   Note: To prevent damage to the screen, please avoid using fingernails or any sharp objects to peel off the protective film. Instead, use adhesive tape to lift and remove the protective film.

Product Overview
Front View

1 Control button
3 KVM switch| 2 Power LED
4 Tactical switch
---|---

Rear View

1. HDMI ports (x2)
2. DisplayPort
3. Mini DisplayPort (AORUS FO32U2P)
4. DisplayPort Out (AORUS FO32U2P)
5. USB Type-C port| 6. Microphone jack
7. Headphone jack
8. USB upstream port
9. USB 3.2 ports (x2)
10. DC IN jack
---|---

Preparing your Monitor for Wall-Mounting
Note: Use only a 100 x 100 mm VESA compatible wall mount kit to mount the monitor on the wall. Refer to the installation guide included in the wall- mount bracket kit. VESA mounting screw quantity and size: 4 x M4 x 10mm minimum.

USING THE DEVICE

Turning the Power On/Off
Power On

1. Connect the power cable to the power adapter.
2. Connect the power adapter to the DC IN jack at the rear of the monitor.
3. Connect the power cable to a power outlet.
4. Press the Control button to turn on the monitor. The Power LED will light in white, indicating the monitor is ready to use.

Power Off
Press the Control button for 2 seconds to turn off the monitor.
Note: When the Main menu appears on the screen, you can also turn off the monitor by moving the Control button down ( ) and selecting “Power Off”. Refer to page 10.

Selecting the Input Source

1. Move the Control button right ( ) to enter the Input menu.
2. Move the Control button up/down ( ) to select the desired input source. Then press the Control button to confirm.

OPERATIONS

Quick Switch Menu
By default, the Control button has been assigned with the specific function.
Note: To change the preset functions, refer to the “Quick Switch” section on page 18.
To access the Quick Switch functions, do the following:

• Move the Control button up ( ) to enter the Black Equalizer menu.
  Move the Control button up/down ( ) to adjust the setting and press the Control button to confirm.

• Move the Control button down ( ) to enter the Picture Mode menu.
  Move the Control button up/down ( ) to select the desired option and press the Control button to confirm.

• Move the Control button left ( ) to enter the Volume menu.
  Move the Control button up/down ( ) to select the desired volume and press the Control button to confirm. • Move the Control button right ( ) to enter the Input menu. Refer to the “Selecting the Input Source” section.
  Note: To close the Quick Switch menu, move the Control button left ( ).

Function Key Guide

• Press the Control button to display the Main menu.

Then use the Control button (up/down/left/right) to select a function page and configure the related settings.

OLED Care

• When the Main menu appears on the screen, move the Control button left ( ) to enter the OLED Care menu.
• Status: Shows the current status of the screen, such as screen usage time and the execution status of the Pixel Clean function.
• Settings: Set up the functions of OLED Care as below.
  ▶ Pixel Clean: When the monitor is used for over 4 hours, it’s recommended to initiate this process to clean and refresh the pixel compensation OLED screen.
  ▶ Static Control: Reduces screen brightness when the image remains static.
  ▶ Pixel Shift: Moves the screen content by pixels to prevent static image retention.
  ▶ APL Stabilize: Adjusts the screen brightness to stabilize Average Picture Level (APL).
  ▶ Sub-Logo Dim: Reduce the brightness of the taskbar and static logos to prevent image retention.
  ▶ Corner Dim: Reduce the brightness at the four corners of the screen.
  ▶ Reset Settings: Reset all OLED Care functions to default.

Game Assist

• When the Main menu appears on the screen, move the Control button right ( ) to enter the Game Assist menu.

• GAME INFO: Enable/Disable the Gaming information shown on the screen.

• Crosshair: Select the type of crosshair to assist with aiming.

• Tactical Switch: Configure the functions of the Tactical Switch button.
  ▶ Resolution Switch (default): Adjust the screen display size and resolution to specified options.
  Note: Please close the full-screen display application before activate Resolution Switch.
  ▶ Function: Select other functionalities for Tactical Switch. (Only one function can be selected at the time.)

• Eagle Eye: Enable/Disable a window which can enlarge a specific area of the screen and adjust related settings.

• Dashboard: Enable/Disable the system information of PC shown on the screen.
  Note: Official software installation and a USB connection between the monitor and the PC are required.

• Display Alignment: Show the alignment lines to help multiple monitor settings.

Configure the Device Settings
When the Main menu appears on the screen, move the Control button up ( ) to enter the Settings menu.

Gaming
Configure the game related settings.

enhance details and improve visibility in dark scenes.
Super Resolution| Enhance the overall image quality to provide sharper detailed visuals.
Display Mode| Select the screen aspect ratio.
Note: This option is not compatible with FreeSync Premium Pro and PIP/PBP functions.
FreeSync Premium Pro| Enable/Disable receiving FreeSync signal.

Picture
Configure the image related settings.

presentation based on the content type or customize personal preferences.

Note: The Monitor uses a Low Blue Light panel and the “Standard” picture mode (Brightness : 85%, Contrast : 50%, Color Temperature : Normal) is in compliance with TÜV Rheinland Hardware Low Blue Light Certification.

Display
Configure the display screen related settings.

single keyboard and mouse.
Daisy Chain (Only for FO32U2P)| Enable/Disable daisy chain function.
RGB Range| Manually set the range of RGB or auto-detect.
Apply Picture Mode| Set the Picture mode to apply to all input sources, or the current input source.

PIP/PBP
Configure the Picture-In-Picture and Picture-By-Picture related settings.

Note: PIP/PBP function cannot be enabled when receiving HDR and FreeSync signals.

System
Configure the system related settings.

Note: To activate the microphone function, select “Headphone+Mic (USB)” in the ESS Headset options.
Audio Mode| Select the desired audio mode.
OSD Settings| Configure the On-Screen-Display menu related settings.
Quick Switch| Assign the functions of Quick Switch to the Control button.
Other Settings| • Resolution Notice: Enable/Disable the resolution information when switching or restarting the screen signal source.
• Input Auto Switch: Enable/Disable automatic switching to an available input source.
• Auto Power OFF: Enable/Disable the timer to automatically turn off the monitor.
• LED Indicator: Select the indicator type of power LED.
• RGB LED: Select the pattern of the backlight LED.
• Type-C Compatibility: Turn this option ON for more mobile devices compatibility.
• HDMI Version: Select the HDMI version.
• DP Version: Select the DisplayPort version. (Only for FO32U2P)
Other Settings (continue)| • HDMI-CEC: When this function is enabled, CEC devices like PS5, XBOX can turn on the monitor when they are awakened and switch off the display when they enter either standby or off mode.
• USB(A/C) Charge: Enable/Disable the USB Type-A and Type-C charging function.
---|---

Reset All
Restore the monitor to its factory default settings.

APPENDICES

Specifications

• 1 x Mini DP 2.1 (UHBR20) in
• 1 x Full-size DP 2.1 (UHBR20) in
• 1 x Full-size DP out
• 1 x USB upstream
• 2 x USB 3.2 (downstream, 5V/1.5A)
• 1 X USB Type-C (5V/3A, 9V/3A, 15V/3A, 20V/3.25A)
• 1 x Microphone
• 1 x Headphone| • 2 x HDMI 2.1
• 1 x DP 1.4
• 1 x USB upstream
• 2 x USB 3.2 (downstream, 5V/1.5A)
• 1 x USB Type-C (5V/3A, 9V/2A, 12V/1.5A, 15V/1.2A)
• 1 x Microphone
• 1 x Headphone
Power Supply| AC100 ~ 240V, 50/60Hz
Adapter Model No.| Chicony A22-280P1A| LITEON PA-1231-26| LITEON PA-1181-76
Power Consumptions| • On Mode: 78W
• Standby: 0.5W
• Off Mode: 0.3W| • On Mode: 70W
• Standby: 0.5W
• Off Mode: 0.3W| • On Mode: 53W
• Standby: 0.5W
• Off Mode: 0.3W
Note: The test conditions follow the CEC standards.
Dimensions (W x H x D)| 718.3 x 613.6 x 158.6 mm (With Stand)
718.3 x 417.5 x 57.2 mm (Without Stand)| 610.3 x 532.5 x 158.6 mm
(With Stand)
610.3 x 356.4 x 57.2 mm
(Without Stand)
Weight| 8.53 ± 0.5 kg (With Stand)
6.2 ± 0.5 kg (Without Stand)| 7.2 ± 0.5 kg (With Stand)
5.0 ± 0.5 kg (Without Stand)
Temperature Range (operation)| 0°C to 35°C

Note: Specifications subject to change without notice.

Supported Timing List

Model| AORUS FO32U2P
AORUS FO32U2| AORUS FO27Q3
---|---|---
Timing List| HDMI| DP| TYPE-C| HDMI| DP| TYPE-C
640 x 480 / 60Hz| V| V| V| V| V| V
640 x 480 / 67Hz| V| V| V| V| V| V
640 x 480 / 72Hz| V| V| V| V| V| V
640 x 480 / 75Hz| V| V| V| V| V| V
720 x 400 / 70Hz| V| V| V| V| V| V
720 x 480 / 60Hz| V| V| V| V| V| V
720 x 576 / 50Hz| V| | | V| |
800 x 600 / 56Hz| V| V| V| V| V| V
800 x 600 / 60Hz| V| V| V| V| V| V
800 x 600 / 72Hz| V| V| V| V| V| V
800 x 600 / 75Hz| V| V| V| V| V| V
832 x 624 / 75Hz| V| V| V| V| V| V
1024 x 768 / 60Hz| V| V| V| V| V| V
1024 x 768 / 70Hz| V| V| V| V| V| V
1024 x 768 / 75Hz| V| V| V| V| V| V
1152 x 864 / 75Hz| V| V| V| V| V| V
1152 x 870 / 75Hz| V| V| V| V| V| V
1280 x 720 / 60Hz| V| V| V| V| V| V
1280 x 720 / 100Hz| V| | | V| |
1280 x 800 / 60Hz| V| V| V| V| V| V
1280 x 960 / 60Hz| V| V| V| V| V| V
1280 x 1024 / 60Hz| V| V| V| V| V| V
1280 x 1024 / 75Hz| V| V| V| V| V| V
1440 x 480 / 60Hz| V| | | V| |
1440 x 900 / 60Hz| V| V| V| V| V| V
1600 x 900 / 60Hz| V| V| V| V| V| V
1680 x 1050 / 60Hz| V| V| V| V| V| V
1920 x 1080 / 24Hz| V| | | V| |
1920 x 1080 / 50Hz| | V| V| V| V| V
1920 x 1080 / 60Hz| | | | V| V| V
1920 x 1080 / 100Hz| | V| V| V| V| V
1920 x 1080 / 120Hz| | V| V| V| V| V
1920 x 1080 / 240Hz| V| V| V| V| V| V
1920 x 1080 / 360Hz| | | | V| V| V
2560 x 1440 / 60Hz| | V| V| V| V| V
---|---|---|---|---|---|---
2560 x 1440 / 120Hz| V| V| V| V| V| V
2560 x 1440 / 240Hz| V| V| V| V| V| V
2560 x 1440 / 360Hz| | | | V| V| V
3840 x 2160 / 30Hz| | V| V| | |
3840 x 2160 / 50Hz| V| V| V| V| |
3840 x 2160 / 60Hz| V| V| V| V| |
3840 x 2160 / 100Hz| V| V| V| V| |
3840 x 2160 / 120Hz| V| V| V| V| |
3840 x 2160 / 165Hz| V| V| V| | |
3840 x 2160 / 200Hz| V| V| V| | |
3840 x 2160 / 240Hz| V| V| V| | |
1280 x 1440 / 60Hz(PBP)| | | | V| V| V
1920 x 2160 / 60Hz(PBP)| V| V| V| | |

Troubleshooting

source and the monitor.
• Check the cable and plug to make sure they are not broken.
• Make sure the monitor is turned on.
No image appears on the screen| • Make sure the monitor and the computer are properly connected and both devices are turned on.
• Make sure you have selected the correct input source. Refer to page 8 or 16.
The image does not fill the entire screen| • Try different Display Mode (aspect ratio) setting. Refer to page 14.
The colors are distorted| • Make sure the input signal cable is properly connected.
• Configure the image related settings. Refer to the “Picture” section.
No sound or volume is low| • Make sure the headphone cable is properly connected.
• Adjust the volume level. Refer to page 18.
• Adjust your computer sound related settings.

Note: If the problem persists, please contact our customer service for further assistance.

Basic Care

• Wipe the screen with a soft, lint-free cloth to remove any residual dust.
• Spray or apply the cleaning fluid onto a soft cloth. Then wipe the screen gently with the damp cloth.

Note:

• Make sure that the cloth is damp, but not wet.
• When wiping, avoid applying excessive pressure on the screen.
• Acidic or abrasive cleaners can damage the screen.

GIGABYTE Service Information
More service information, please visit GIGABYTE official website.
https://www.gigabyte.com/

SAFETY INFORMATION

Safety Precautions
Read through the following Safety Precautions before using the monitor.

• Only use the accessories that are provided with the monitor or that which are recommended by the manufacturer.
• Keep the plastic packaging bag for the product in a place that cannot be reached by children.
• Before connecting the monitor to the power outlet, make sure that the voltage rating of the power cable is compatible with the power specification in the country where you are located.
• The power cord plug must be connected to a properly wired and grounded power outlet.
• Do not touch the plug with wet hands, as it can easily cause electric shock.
• Place the monitor in a stable and well-ventilated place.
• Do not place the monitor near any heat sources, such as electric radiators or direct sunlight.
• The holes or openings on the monitor are for ventilation. Do not cover or block the ventilation holes with any objects.
• Do not use the monitor near water, drinks, or all types of liquids. Failure to do so may result in electric shock or damage to the monitor.
• Make sure to unplug the monitor from the power outlet before cleaning.
• As the screen surface is easy to be scratched, avoid touching the surface with any hard or sharp object.
• Use a soft lint-free cloth instead of a tissue to wipe the screen. You may use a glass cleaner to clean the monitor if required. However, never spray the cleaner directly onto the screen.
• Disconnect the power cable if the monitor is not being used for a long period of time.
• Do not attempt to disassemble or repair the monitor yourself.

Stability Hazard Precautions
The product may fall, causing serious personal injury or death. To prevent injury, this product must be securely attached to the floor/wall in accordance with the installation instructions.
Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• ALWAYS use stands or installation methods recommended by the manufacturer of the product set.
• ALWAYS use furniture that can safely support the product.
• ALWAYS ensure the product is not overhanging the edge of the supporting furniture.
• ALWAYS educate children about the dangers of climbing on furniture to reach the product or its controls.
• ALWAYS route cords and cables connected to your product so they cannot be tripped over, pulled or grabbed.
• NEVER place a product in an unstable location.
• NEVER place the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support.
• NEVER place the product on cloth or other materials that may be located between the product and supporting furniture.
• NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the product or furniture on which the product is placed.
• If the existing product is going to be retained and relocated, the same considerations as above should be applied.
• To prevent personal injury or damage to the product caused by tipping over due to earthquakes or other shocks, make sure to install the product in a stable location and take measures to prevent falling.

User Comfort Recommendations
The monitor adopts Flicker-Free technology which clears the eye visible monitor flicker and prevents users from suffering eye strain and fatigue.
The following are some tips for comfortable viewing of your monitor:

• Allow a minimum distance of 50 to 75cm (20” to 30”) between your eyes and the monitor.
• A general guideline is to position the monitor such that the top of the screen is at or slightly below your eye-height when you are comfortably seated.
• Use adequate lighting for the type of work you are performing.
• Take regular and frequent breaks (at least for 10 minutes) every half-hour.
• Be sure to periodically look away from your monitor screen and focus on a far object for at least 20 seconds during the breaks.
• Eye exercise can help reduce eye strain. Repeat these exercises frequently: (1) look up and down (2) slowly roll your eye (3) move your eyes diagonally.

This model has passed Flicker Free and Low Blue Light verification by TÜV Rheinland.
To learn more: https://www.gigabyte.com/tw/Support/FAQ/4310

REGULATORY INFORMATION

United States of America, Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.

European Union (EU) CE Declaration of Conformity
This device complies with the following directives: Electromagnetic Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/EU, ErP Directive 2009/125/EC, RoHS directive (recast) 2011/65/EU & the Directive (EU) 2015/863 amendment of Annex II. Compliance with these directives is assessed using applicable European Harmonised Standards.

European Union (EU) RoHS (recast) Directive 2011/65/EU & the European Commission **Delegated Directive (EU) 2015/863 Statement**
GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals.

European Union (EU) Community Waste Electrical & Electronic Equipment (WEEE) **Directive Statement**
GIGABYTE will fulfill the national laws as interpreted from the 2012/19/EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive. The WEEE Directive specifies the treatment, collection, recycling and disposal of electric and electronic devices and their components. Under the Directive, used equipment must be marked, collected separately, and disposed of properly.

WEEE Symbol Statement
**** The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling.

End of Life Directives-Recycling
**** The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.

India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

References

• GIGABYTE Global
• GIGABYTE Global
• 視力保護 — 技嘉對藍光與螢幕閃爍的管理以及TÜV Rheinland認證介紹 - GIGABYTE 技嘉科技

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>