SONY WI-C100 Wireless Stereo Headset User Guide
- June 6, 2024
- Sony
Table of Contents
SONY WI-C100 Wireless Stereo Headset
Wireless Stereo Headset
FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.
Do not install the product in a confined space, such as a bookcase or built-in
cabinet. Do not expose the batteries (battery pack or batteries installed) to
excessive heat, such as sunshine, fire or the like for a long time.
Do not dismantle, open or shred secondary cells or batteries. Do not expose
cells or batteries to heat or fire. Avoid storage in direct sunlight. In the
event of a cell leaking, do not allow the liquid to come in contact with the
skin or eyes. If contact has been made, wash the affected area with copious
amounts of water and seek medical advice. Secondary cells and batteries need
to be charged before use. Always refer to the manufacturer’s instructions or
product manual for proper charging instructions. After extended periods of
storage, it may be necessary to charge and discharge the cells or batteries
several times to obtain maximum performance. Dispose of properly.
RECYCLING RECHARGEABLE BATTERIES
Rechargeable batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, visit http://www.sony.com/electronics/eco/environmental- management Caution: Do not handle damaged or leaking rechargeable batteries.
FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE
PROVINCE OF QUEBEC.
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this unit.
If you have any questions about this product:
Visit: https://www.sony.com/electronics/support
Contact: Sony Customer Information Service Center at
1-800-222-7669 Write: Sony Customer
Information Service Center 12451 Gateway Blvd., Fort Myers, FL 33913
Supplier’s Declaration of Conformity Trade Name: SONY Model: YY2957
Responsible Party: Sony Electronics Inc. Address: 16535 Via Esprillo, San
Diego, CA 92127 U.S.A. Telephone Number:
858-942-2230 This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE:
This unit has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This unit generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this unit does cause harmful interference to radio
or television reception, which can be determined by turning the unit off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the unit and receiver.
- Connect the unit into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This unit must not be co-located or operated in conjunction with any other antenna or transmitter. This unit complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This unit has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR).
For customers in Canada
This unit contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This unit may not cause interference; and
- This unit must accept any interference, including interference that may cause undesired operation of the unit.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The unit has been tested and found to comply with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.High volume may adversely affect your hearing. Do not use the unit while walking, driving, or cycling. Doing so may cause traffic accidents. Do not use in hazardous areas unless the surrounding sound can be heard. If water or foreign matter enters the unit, it may result in fire or electric shock. If water or foreign matter enters the unit, stop use immediately and consult your nearest Sony dealer. In particular, be careful in the following cases.
- When using the unit near a sink or liquid container Be careful that the unit does not fall into a sink or container filled with water.
- When using the unit in the rain or snow, or in humid locations
For details on the effects of contact with the human body from the mobile phone or other wireless devices connected to the unit, refer to the instruction manual of the wireless device. If the earbud tips are not securely attached, they may fall off and remain inside the ear during use. Make sure that the earbud tips are securely attached before use. Never insert the USB plug when the unit or charging cable is wet. If the USB plug is inserted while the unit or charging cable is wet, a short circuit may occur due to liquid (tap water, seawater, soft drink, etc.) or foreign matter on the unit or charging cable, and cause abnormal heat generation or malfunction. This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device. There is a danger that small parts may be swallowed. After use, store in a location out of reach of small children.
Note about static electricity
f you use the unit when the air is dry, you may experience discomfort due to static electricity accumulated on your body. This is not a malfunction of the unit. You can reduce the effect by wearing clothes made of natural materials that do not easily generate static electricity.
IMPORTANT
The factory default setting of the voice guidance for this unit is English.
The voice guidance can be heard from the unit in the following situations:
- When powering on: “Power on”
- When powering off: “Power off”
- When the remaining battery level is low and recharge is recommended: “Low battery, please recharge headset”
- When automatically turning off due to low battery: “Please recharge headset. Power off”
- When checking the remaining battery level: “Battery fully charged” /“Battery about 70%” / “Battery about 50%”
- When entering pairing mode: “Bluetooth pairing”
- When establishing a Bluetooth connection: “Bluetooth connected”
- When disconnecting a Bluetooth connection: “Bluetooth disconnected”
Precautions
The two-dimensional code or the URL on the cover will help you access the help guide that describes useful notes or procedures in details.
On water resistance of the unit
- Unless the unit is used correctly, water may get into the unit and cause fire, electrocution, or malfunctions. Note the following cautions carefully and use the unit correctly. (Make sure that the USB Type-C® port cover is closed securely when you use the unit.)
To maintain water-resistant performance
Carefully note the precautions below to ensure proper use of the unit. • Make sure the USB Type-C port cover is closed securely when using the unit. If there is any foreign material on the cover or it is not completely closed, the water-resistant performance cannot be maintained. Water may get inside and cause the unit to malfunction.
- Do not splash water forcibly into the sound output holes.
- Do not drop the unit into water, and do not use it underwater.
- Do not allow the unit to remain wet in a cold environment, as the water may freeze. To prevent malfunction, make sure to wipe off any water after use. Do not place the unit in water or use it in a humid place such as a bathroom.
- Do not drop the unit or expose it to mechanical shock. Doing so may deform or damage the unit, resulting in deterioration of water resistance performance.
On BLUETOOTH® communications
- Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident:
in hospitals, near priority seating in trains, locations where inflammable gas is present, near automatic doors, or near fire alarms.
On charging the unit
- Make sure to close the USB Type-C port cover securely after charging. Perspiration or water may cause damage.
Notes on wearing the unit
- After use, remove the headphones slowly.
- Because the earbud tips achieve a tight seal in the ears, forcibly pressing them in or quickly pulling them out can result in eardrum damage. When wearing the earbud tips, the speaker diaphragm may produce a click sound. This is not a malfunction.
Other notes
- If you experience discomfort while using the unit, stop using it immediately.
- If you have any questions or problems concerning this unit that are notcovered in this manual, please consult your nearest Sony dealer.
Specifications
Headset
Power source:
DC 3.7 V: Built-in lithium-ion rechargeable battery DC 5 V: When charged using
USB Operating temperature: 0 °C to 40 °C (32 °F to 104 °F) Rated power
consumption:0.4 W Mass: Approx. 20 g (0.71 oz) Included items: Wireless Stereo
Headset (1) Hybrid silicone rubber earbud tips (SS (1 line) (2), M (3 lines)
(attached to the unit at the factory) (2), LL (5 lines) (2))
Communication specification
Communication system: Bluetooth Specification version 5.0 Output: Bluetooth Specification Power Class 2 Frequency band: 2.4 GHz band (2.4000 GHz – 2.4835 GHz) Design and specifications are subject to change without notice.
System requirements for battery charge using USB
USB AC adaptor
A commercially available USB AC adaptor capable of supplying an output current
of 0.5 A (500 mA) or more
- Do not use a USB adaptor that exceeds the maximum output of 13 W (5 V, 2.6 A).
USB cable
Commercially available USB Type-C cable (compliant with USB standards)
Compatible iPhone/iPod models
iPhone SE (2nd generation), iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPod touch (7th generation), iPod touch (6th generation)
Trademarks
- Apple, iPhone, iPod and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Group Corporation and its subsidiaries is under license.
- USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
- All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. In this manual, TM and ® marks are not specified.
Licenses
- Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
- This product contains software that Sony uses under a licensing agreement with the owner of its copyright. We are obligated to announce the contents of the agreement to customers under the requirement by the owner of the copyright for the software. Please access the following URL and read the contents of the license. https://rd1.sony.net/help/mdr/sl/22/
- Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.
References
- Sony Sustainable Development | Go Green Environmental Policy
- Sony | Headphones Connect - Apps on Google Play
- Help Guide | Top
- Help Guide | Top
- Help Guide | Top
- 索尼官网- 索尼服务与支持网站首页_索尼售后_Sony售后首页
- 索尼官网- 索尼服务与支持网站首页_索尼售后_Sony售后首页
- Select your country or region | Sony AP
- Select your country or region | Sony USA
- Support for Sony products | Sony USA
- Sony Support Europe
- Sony 360 Reality Audio | So Immersive. So Real.
- Support for Sony products | Sony USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>