hama 00201649 USB-C Charger Instruction Manual

: June 6, 2024
: Hama

Table of Contents

hama 00201649 USB-C Charger
Operating instruction
Package contents
Safety instructions
Operation
Care and maintenance
Technical data
Warranty disclaimer
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hama 00201649 USB-C Charger

Operating instruction

Thank you for choosing this Hama product! Take your time and read the following instructions and information completely.Please keep these instructions in asafe place for futurereference.

Explanation of warning symbols and notes

Risk of electric shock This indicates arisk of electric shock from touching uninsulated product parts that may carry hazardous voltage.
Warning This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.
Note This symbol is used to indicate additional information or important notes.

Package contents

charger
these operating instructions

Safety instructions

Protect the product from dirt, moistureand overheating and use it in dry rooms only.
Do not drop the product and do not expose it to any major shocks.
Don’t operate the product outside the power limits specified in the technical data.
Don’t modify the device in any way.Doing so voids the warranty.
Do not continue to operate the product if it is visibly damaged.
Use the product only for the intended purpose.
As with all electrical products, this device should be kept out of the reach of children.
Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Route all cables so thereisnorisk of tripping.
Donot bend or crush the cable.
Always pull directly on the plug when disconnecting the cable, never on the cable itself.
Dispose of packaging material immediately in accordance with the locally applicable regulations.
The product is intended only for use inside buildings.
Only use the article under moderate climatic conditions.
Don’t use the product in areas in which electronic products arenot permitted.
Do not use the product in a damp environment and avoid splashing water.

Risk of electric shock

Do not open the device or continue to operate it if it becomes damaged.
Do not use the product if the AC adapter,the adapter cable or the mains cable are damaged.
Don’t attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Operation

Note -mains voltage 100 -240 V The charger is suitable for mains voltages of 100 -240 Vand thereforecan be used worldwide. Please note that acountry- specificadapter may be necessary.

Warning -connecting devices

Before connecting device, check whether it can be adequately supplied with the charger’s current capacity.
Ensure that the power of the connected device does not exceed 20 W.
Note the instructions in your device’s operating manual.
Note -Power Delivery /QC3.0, 2.0
Plug &GO: no additional software is required, simply plug in and start: Thanks to Power Delivery /QC3.0, 2.0, the voltage and power are adjusted automatically.
Be aware that, for efficient and optimized charging, your terminal device must support the PD (Power Delivery) /QC3.0, 2.0 function.
If you have a large number of PD/QC-enabled devices with different firmware updates, it may be that the function is not fully supported.

Warning

Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
Disconnect the product from the power supply using the On/Off switch –ifthis is not available, unplug the power cordfromthe socket.
If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
If you will not be using the product for a prolonged period, disconnect it from mains power. Unless different instructions have been expressly given in the operating instructions for the devices you arecharging, proceed as follows:
Connect your device to a USB charging socket using a suitable USB cable.
Connect the charger to a properly installed and easily accessible mains socket.
The charging process is displayed on your device.
Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
Then disconnect the charger from the line connection.
When charging the rechargeable batteries in the device, note the maximum charging times for the built-in batteries.

Care and maintenance

Only use soft, dry towels to clean the product.

Note Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Technical data

Speci fi cations according to Regulation (EU) 2019/1782

Brand name, commercial register number, address| Hama, HRA12159,

Dresdner Str. 9,

86653 Monheim, Germany

Model identifier| 00201649, 00201650
Input voltage| 100 – 240 V
Input AC frequency| 50 / 60Hz
Output voltage / output current / output power total| 5.0 V DC/ 3.0 A/ 15.0 W

9.0 V DC/ 2.22 A/ 20.0 W

12.0 V DC/1.67 A/ 20.0 W

Average efficiency during operation| 81.4 %
Efficiency at low load (10%)| 82.5 %
Power consumption at zero load| 0.10 W

Warranty disclaimer

Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or safety notes.