AFAC SB01 Smart Bracelet User Manual

SB01 Smart Bracelet
User Manual

PREPARATION

Make sure that the power is sufficient before turning it on, Use a USB charging port to charge

First, remove the wrist band Take out the fuselage

Plug into the USB charging head to charge

For the first time, please take out the bracelet and charge the device with the corresponding charger. When charging,  the bracelet will start automatically (charging  mode is shown in the figure below: remove the bracelet body from the wristband and plug the charging port  into the standard USB port to charge.)

WEARING METHOD

1. Best  wear  the  wristband  behind malleolus LeftHand
2. Adjust the size suitable for the size of wrists  via  Adjustment  Hole;  Fasten  wrist strap buttons;
3. The sensor shall be close to the skin avoiding moving.
   

POWER ON/OFF

1. In the state of the wristband shutdown, the long touch function key over 3 seconds can make the device vibrate.
2. When the wristband is in the boot state, it will switch to the shutdown interface. If the touch function key is more than 3 seconds, it can enter the shutdown interface.   After the short touch is selected  Off,  it will touch the shutdown again.

OPERATION

1. When the device starts up, touching the function keys for a short time period can lighten the screen or switch over the display;
2. The screen shall be turned off without operation and users can connect the mobile phone APP to revise off-screen time;
3. Switch to the heart rate and blood pressure interfaces to be tested automatically and leave the heart rate and blood pressure interfaces to stop tests.

INSTALL THE WRISTBAND APP

ScanthefollowingQR codes or enter into various large application markets to download and install“ DayBand”.

https://app.help-document.com/dayband/download/index.html| https://app .help-document.com/dayband/download/index.html

Device requirement: iOS8.0 and above; Android 4.4 and above to support Bluetooth 4.0

DEVICE ATTACHMENT

When being used for the first time, it is necessary to connect the APP for alignment.
After successful connection, the wristband will self-synchronize time, or otherwise, step calculation and sleep data won’t be accurate.

Open the mobile phone APP Click to set up icons
↓
My device (iOS)/ search equipment(Android)
↓
Pull down scanning equipment
↓
Pull down scanning equipment

Bluetooth connection: after successfully matching, APP will automatically save the wristband Bluetooth address. When APP is opened or operated in the background, it will automatically search and link with the wristband.
Data Synchronism: manually pull down the synchronization data on the APP home page; the bracelet can store offline data for 7 days, the more data, the longer the synchronization time is, and the longest time is about 2 minutes.

APP FUNCTIONS AND SETTING

Personal information and exercise goals
After entering into APP, please first set up personal information.
Setting →Personal setting

• Head portrait, gender, age, height, and weight can be set up and personal information can enhance the accuracy of data.
• Customize personal everyday exercise goals. A reasonable exercise plan is helpful for promoting body quality.

MAIN FUNCTIONAL INTERFACE

Main interface
When the Bluetooth icon is , it means the wristband is not connected to the cell phone. When the Bluetooth icon is , the connection is successful. When the wristband and APP  are paired for the first time, the wristband will synchronize the weather, time, date and week of the mobile phone.
Long press 3 seconds to switch the main interface
Temperature monitoring
In the temperature monitoring interface, During the measurement, please wait for several tens of seconds for the data to appear When taking your temperature, wear it for more  than 1 minute to be more accurate
Motion Data
Display step count, wristband default step counting mode, the wristband is worn on the wrist. When the user walks and arms swing, the wristband is recorded according to the number of steps.
Heart rate monitoring
In the heart rate monitoring interface, During the measurement, please wait for several tens of seconds for the data to appear
Blood pressure monitoring
In the Blood pressure monitoring interface, During the measurement, please wait for several tens of seconds for the data to appear
Blood oxygen monitoring
In the Blood oxygen monitoring interface, During the measurement, please wait for several tens of seconds for the data to appear

• When the test, the icon will beat and the back heart rate of the hand ring LED lights will be lit;
• When testing, the sensor should stick to the skin to avoid the influence of external light on the accuracy of the test.
• To keep the test area clean, sweat or stains will affect the test results.

Movement patterns
In the motion interface, long press for three seconds to enter the specific motion interface, which includes a number of movements. Click to switch. In the motion interface,  hold the button for three seconds to start the motion, hold the button for three seconds to pause, and click to switch the motion mode.
Information interface
In the message interface, long press three seconds to view the message, click page flip, view the message to exit, or long-press three seconds to exit.
More functional interface
In the more features interface, long press three seconds to enter the lower menu interface for more functions.
Find phone interface
When connected, click on the “Find Phone” option and the phone will send a vibration reminder or ringtone reminder.
Restore setting interface
The interface is restored for three seconds, and the bracelet is restored to the factory settings.
About the wristband interface
On the wristband interface, the four digits and the version number of the Bluetooth address are displayed.
Shutdown interface
In the Shutdown interface, long press more than three seconds to shake the phone off.

PROMOTING FUNCTION

For promoting function, a promoting switch shall be switched on in the APP-end Setting Center, mobile phone and wristband shall be kept to be connected successfully and there will be vibrating reminders when there are messages.

Call reminding: when the caller calls, the ring will shake and the name or number of the caller is displayed. (if the caller’s name has been saved in the phone address book, the name is displayed, otherwise the display number)
SMS reminder: when a text message arrives, the bracelet will vibrate and display the SMS icon reminder; the address message of the address book contact person displays the name and the short message number of the stranger.
Intelligent alarm clock: it can set up three alarm clocks, and will synchronize to the bracelet after setting up. The intelligent alarm clock is a silent alarm clock. When the alarm is on, the bracelet will cause moderate vibration, and support the offline alarm clock reminder.

PARAMETER

Software Functions

Spanish, Japanese, French, Russian, Arabic, Italy, Portugal…
APP name| Daybed
charging method| USB charging
OTA upgrade| support

NOTE

1. Please avoid strong impact, extreme heat, and exposure to the wristband.
2. Please do not disassemble, repair, or transform the machine on its The use of the environment is 0 degrees -45 degrees, and it is forbidden to throw it into the fire so as not to cause an explosion.
3. Please wipe the water, the wristband can be used only for the charging operation with a soft cloth, otherwise, it will cause corrosion of the charging contact point, and charging fault.
4. Do not touch chemical substances such as gasoline, clean solvent, propanol, alcohol, or insect repellent.
5. Please do not use this product in high pressure and high magnetic
6. If you have sensitive skin or tighten the wristband, you may feel
7. Please dry the sweat drips on the wrist The strap has long contact with soap, sweat, allergies, or pollution ingredients, which may cause skin allergy itching.
8. If it is often used, it is recommended to clean the wristband every week. Wipe with a wet cloth and remove oil or dust with mild soap.
9. It is not appropriate to wear a hot bath with a wristband.
10. After swimming, please wipe the wristband in time so as to keep
11. When you do the pulse rate testing, please kindly wait at least 10 seconds to see the stable result.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device  must accept any interference received, including interference that may cause undesired operation
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device  must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which  can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the  user’s authority to operate the equipment

Shenzhen Aukeyhi Technology Co., Ltd.
www.afac.vip | [email protected] | Made in China
Room 201, Block A, Qianwan 1st Road, Qianhai
Shenzhen & Hongkong Corperative District,
Shenzhen, P.R. China
FCC ID:2AYA4-SB01

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>