Shenzhen Zijiang Electronics ZJ5811 Portable Thermal Printer Instruction Manual

Shenzhen Zijiang Electronics ZJ5811 Portable Thermal Printer

Notice:

To ensure the safety of storage and transportation, we stick insulating tape on the metal of the Li-Ion battery. Please kindly take off the insulating tape before its firstly turned on.

Warm tip: Please seal the battery and pay attention to the garbage classification when discarding it to avoid environmental pollution.

Specification

• PrinlingMethod: Direct Thermal
• Speed:,s;;gomm/sec
• ReliabilityTPH Life: 100km
• Resolution: 203DPI (8dot/mm)
• Printing Width: 48mm (384dot)
• Paper Width: 58±01mm
• Paper Type: Thermal Paper
• Power: rechargeable lithium battery
• Battery: 7.4VDC, 2000mAh
• Charging mode: USB 5V/2A

Print parameters: support to download the Logo trademark, support bar-code print. Support bar-code types: UPC-A/ UPC-E / JAN 13 (EAN13)/ JANS (EANS}/ CODE39/ ITF I CODABAR / CODE93 / CODE128; Two-dimensional code:

QR CODE

• Character size: 384 dots/line
• FontA:12″24dots, 1.5(W)”3.0(H)mm
• FontB: 9’17dots, 1.1(W)”2.1(H)mm
• Fonte: 9’24dots, 1.1 (W)’3.0(H)mm
• Simplified/Traditional:24″24dots,3.0(W)”3.0(H)mm
• Printing Chinese character: Chinese: simplified Chinese 24×24 point. support GB18030 font library, support Taiwan and HK traditional(complex font)

ANK: ANKcharacters

Language: Support for multiple languages (Support Traditional, Korean, Japanese, etc. must be instructed before purchased )Extended character table: OEM437/Katakana/OEM850/0EM860/0EM863/0EM865/West Europe/Greek /Hebrew/EastEurope/I ran/WPC 1252/0EM866/0E M852/0EM858/I ran I I/ Latvian/Arabic/PT1511251 /OEM7 4 7 /WPC1257 /Vietnam/OEM864/Hebrew/ WPC1255/Thai

Appearance

Communication Interface

1. Bluetooth 2.0/4.0: standard Bluetooth 2.014.0 Communications Protocol
2. USB: Standard USB Communications Protocol

The installation of the paper roll

The printer use 58MM thermal paper, and adopt easy paper loading. So the paper is very convenient to install. Paper diameter Max 43mm.
The thermal paper installation method is as follows:

1. Open the printer top cover
2. Thermal Paper as follows Graph to put into the paper storehouse
3. Put out a little of the paper outside the printer, then close the top cover.
4. Use paper sawtooth tear off the redundant paper

Operating Manual for Android OS

Note: If you do not find the instruction of the interface, please kindly reference the electronic manual in CD.

Part 1:

This manual applies to all of our android OS compatible printers ( both 58mm & 80mm width printers)Currently, the common communication ports we used for android OS are Bluetooth If you want to use an Android Device connected with our printer, first of all make sure that printers can be supported Android Operate System, proceed as follows ( Bluetooth as an example):

Step 1:

• Insert the CD driver disc into the CD-ROM, connect your Android device with your computer;
  Step 2:

•  Find the File Named· SDK” from the CD driver, Then follow the path:· Android SDK—BLUETOOTHDEMO—-bin—-BT-POSPrinter.APK”, and install it into your Android device.
  Step 3:

• Connect your Android device with our printer once the installation is done.
  Step 4:

• Find his icon :] on the Android device, and click “Connect Printer” lo search the Bluetooth printer, (The default pairing password for Bluetooth connection is” 1234″). After the connection successfully, click on the “Print Test Page”, the printer will work

Part 2: Operation instructions

1. 0pen the installed demo If you installed a Bluetooth demo, click “POSPrinler-BT”
2. After opening the DEMO, you need to connect the printer.

If you need to search for new printers again, click “Scanning Device” and select the printers you want to add.

Enter the pairing code, the default is 1234 or 0000, click “OK”.

The connection is successful, as is shown:

0perating Manual for IOS APP

1. Download the Test Tools “POS-PrinterV1 .o· from App Store.as below:
2. Turn on the Bluetooth setting of I0S device, then click “PCS-Printer”:
3. Into the App of “PCS-Printer”, select lhe paper width as below:
4. Select the way of communication of printers, “Bluetooth”
5. If connect with Bluetooth, then you can click• Select Printer• first, you will search the “Bluetooth Printer” (the default name of printer is Bluetooth Printer), click it to be connected.

Cleaning of the printer head

Cleaning of printer

When the printer has the following conditions, you should clean the printer head:

1. The printer does not print clearly and the thermal paper is Ok.
2. The printer Print pages lengthways is not clear
3. It’s getting too noisy while feeding paper or printing.

Printer head cleaning steps are followed:

1. Power off the printer and open the paper room cover. Remove the thermal paper roll.
2. lf the printer just finished printing, please wait for the printhead to cool down.
3. With a soft cotton cloth dipped in ethanol (please make sure there is no dripping), wipe the thermal printer head gently and remove any dust or stains.
4. Wait for the complete evaporation of any ethanol, then place the thermal paper roll back in the printer and close the paper room cover, then print a test page

Notes:

• When the printer maintenance must ensure that the power is shutdown
• Hands or other metal tools away from the surface of the printer head, do not use tweezers to scratch the surface of the printer head and other sensitive parts.
• Do not use gasoline, acetone and other organic solvents for printer head cleaning.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>